Mosquito Helicopter - Best Shipped Kit Helicopter in the World!

Подписаться 180 тыс.

Просмотров 41 тыс.

50% 1

Most popular Kit Helicopter in the World gets shipped WORLD WIDE!
👇🏼 👇🏼👇🏼 Click "SHOW MORE" to see the LINKS Below! ✈️✈️✈️
Watch the FULL FACTORY TOUR of Mosquito Helicopter HERE:
• Mosquito Helicopter | ...
See Mosquito Helicopter In Flight HERE:
• Mosquito Helicopter - ...
See how Mosquito Helicopter Rotor Blades are Made HERE:
• How its Made- Mosquito...
Please follow us on Facebook where we post nearly daily:
/ experimentalaircraftch...
Check out our NEW WEBSITE!
experimentalair...
#experimentalaircraft #experimentalaircraftchannel #helicopter
***SUBSCRIBE Right Now to Experimental Aircraft Channel
(It's FREE) and get exclusive offers below!
Our "Sister" Podcast Channel on RU-vid: / @eacaviationpodcast9668
Please visit our Channel Sponsors here:
*Dynon Avionics (Avionics for Experimental, Certified and Light Sport Aircraft)
dynonavionics....
*Flying Eyes Optics (Aviation Sunglasses and More!)
Get 10% off your purchase by using Promo Code: EXPERIMENTAL
flyingeyesopti...
*Airtech Coatings ("We Make Paint Fly" - Fabric and Paint Manufacturer)
airtechcoatings...
*South Mississippi Light Aircraft (Official Rotax Repair and Training Center)
flysmla.com/
*Clemens Insurance Agency (Aircraft insurance and other insurance products)
www.clemensins...
*Edge Performance (High Performance Aircraft Engines)
www.edgeperfor...
*Foxtrot 95 Calhoun County Airport (Identifier F95) Panhandle of Florida
www.flyfoxtrot...
Please visit our Affiliates Here:
**Flying Eyes Optics - 10% Off Use Code: EXPERIMENTAL
flyingeyesopti...
**Griplock Ties (Speaks for itself!) Free Shipping with Code: EXPERIMENTAL
griplockties.c...
(Get FREE Shipping *USA ONLY*)
Join the NEW Facebook GROUP where we encourage "Say it With VIDEO" build updates on YOUR current project:
/ experimentalaircraftch...
And we are on INSTAGRAM too!
/ experimentalaircraftch...
WE HAVE A PODCAST! Audio only can be found on iTune, GooglePlay and Podbean. Fill VideoPodcast (V-Podcast) on RU-vid by searching "EAC Aviation Podcast" or click: / @eacaviationpodcast9668

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@LarsLarsen77 Год назад

I loaded a 40' container full of weed once. We ran it up from the garden by the pickup truck load. The container was the drying room.

@ExperimentalAircraftChannel Год назад

Haha! Well then! That was a unique EXPERIENCE!

@tomcoryell Год назад

Having loaded many a touring concert sound system,this seems pretty familiar and much lighter.

@otisspunkmeyer9339 2 месяца назад

Rag weed?

@santanabrasil7761 2 месяца назад

I am in brazil, but no one selling here 🤦🏼‍♂️🤦🏼‍♂️🤦🏼‍♂️🇧🇷🇧🇷🇧🇷🇧🇷🇺🇸🇺🇸🇺🇸🇺🇸. How can i buy one COMPOSITE XE 290 4 Temps. With 75 liters???? Please help. I knew that is selling by parts, and i fix it here, set it here

@robertlafnear7034 Год назад

It takes a lot of PRE planing to have all that Plywood fitted to the parts and ready to go... piece -o-cake........ bet I alone could do that in 1.4 hrs.

@ExperimentalAircraftChannel Год назад

Yeah? I'd like to see that. Can we build a challenge around YOU doing the work?! :-)

@robertlafnear7034 Год назад

SURE (lol).😅

@timcastens1150 7 месяцев назад

I've unloaded sacks of potatoes from a train car, worse job we had to do, potatos were in krocker sacks, 85 pounds each, horrible ever how you go to pick them up they want to go the other way, seems like your never getting it unloaded, usually took about 2 days. Loading semis with 65 lb bags of soybeans was a breeze comparatively , them were the days 🤩

@PilotParticiptionTrophyWinner Год назад

These people are some of the most talented and hard working people you will ever meet. A level of ingenuity and freedom that's been lost in this county for the most part in small business. This helicopter is the most fun aircraft I've ever flown. Most importantly, these are some of the finest people you will ever meet. They don't make them like this anymore. A real global crown Jewel in my opinion. The guys and gals at the mosquito factory are what make Trenton FL one of my favorite places in the entire world.

@wes_d Год назад

I loaded 40’ trailers at a shoe warehouse. During the summer. I know it is hot. Another reason I ended up going to school to get a desk job to avoid the real work ;-)

@ExperimentalAircraftChannel Год назад

Haha! Smart man! We have to get away from the computer (and desk ) once in a while and experience life outside the office. So little trips like this is very rewarding. Thanks for saying hello!

@SARUNNE13 2 месяца назад

I'm very interested in which country this is from

@snappers_antique_firearms Год назад

I would love to get one of these helicopters one day. They look like so much fun

@ExperimentalAircraftChannel Год назад

Looks to be a fairly simple kit to build as well! Thanks for stopping by today!

@SARUNNE13 2 месяца назад

There is a telephone number that the boss can contact

@barrywinslow9798 Месяц назад

Wow....right up the street from me......thanks for the vid. Blessings

@65gtotrips Год назад

They’re so cool ! Little baby helos ! How difficult is it to learn to fly one of these ?

@ticenits1926 11 месяцев назад

most pilots can learn to fly a helicopter with 8-10 hours of professional training. This doesnt include disaster recovery, just the basics to safely fly with no surprises. Most of their models require a full helicopter pilots license, so about 60 hours of flight training which will cost around $20,000. They do have an ultralight version that requires no license at all.

@tomeickhorst6787 Год назад

I hope the turbine was strapped down because if it was just sat in there. There will not be any composite cockpits left by time it gets to Australia

@ExperimentalAircraftChannel Год назад

Hah! Agreed 100%. No... it was secured to the floor for sure. Attention to detail... YOU would make a great Builder! :-)

@Rinto-MacGyver Месяц назад

Sangat menyukai, bisakah saya dari indonesia memilikinya, berapa harga yg harus saya bayar untuk memilikinya, solusi untuk ke kebun sawit yang luas, segera kabari saya, saya tertarik dengan mesin piston, dan saya rasa pengiriman komponen secara terpisah akan lebih baik, Untuk menghindari pajak impor masuk yang tinggi di indonesia 😉😁

@juniordenney9892 Год назад

Before I retired I worked at a shipping warehouse. Loading containers was a daily thing. And yes they get hot in the summer 🌞

@ExperimentalAircraftChannel Год назад

I think I would prefer a mobile AC unit to be blowing in the door! Hah! Thanks for saying hello!

@bobbysmith5642 8 месяцев назад

If you call them engineers.... ya better show their P.E.!

@deadpavuk7657 5 месяцев назад

Этот вертолет уступает по всем характертстикам более легкому российскому вертолету "Микрон"

@jasonrooke11 10 месяцев назад

Im positive you have a brother that has a law you tube channel Lehtos law ??

@danielzuluaga4232 2 месяца назад

Wow!!! Please, keep up that good work💪💪💪

@viktorviktorius-o3n 6 месяцев назад

what are the prices of these helicopters and how can they be obtained in the territory of the European Union

@williamwatitwa3534 13 дней назад

Must be the most profitable bussiness

@jacoblacey9826 8 месяцев назад

Good to see shame not all the parts we’re in the container when they got to Australia

@loydcourson5276 7 месяцев назад

had to unload trucks of completed chairs .

@catchulater7483 Год назад

These guys are something else. The helo they make is alr the neatest thing ever then the fact they operate just right down the road from my house is even more awesome!

@Muhammedarslansattar.Abdulsatt 11 месяцев назад

Handle on 3 point markeres 3rd most impotant

@NorthEastIndianslife 11 месяцев назад

How much it's price

@Lewthor Год назад

We've shipped and received a lot of large equipment via container. If we were able to make a subfloor we'd cleat stuff in place with blocks nailed into the floor. If not, we would lash crating to the D-rings on the inside top/bottom on the walls. I hope there was something else in there to keep the kits from sliding around besides the good planning. 🤑 Thanks for the video!

@ExperimentalAircraftChannel Год назад

That subfloor was packed in there very tight. And then everything fastened to that. Wasn't much room left to "wiggle" around. Thank You for taking the time to watch!

@kostyaa1990 3 месяца назад

Typical...

@joeymorris4863 6 месяцев назад

I load 20’ & 40’ Ccans (as a transporting company). We use specialized equipment/ trailers to drop the Ccan at the customers’ location. We place the Ccan at ground level, which allows for easy loading g of product, then return hours/days/weeks later to retrieve it and then bring it to the ports for international logistics. Just another way of doing things.

@mikehertz6507 7 месяцев назад

I use to load trucks at UPS. Trailer would sit in the sun all day then I'd get to crawl in a 40 footer and load 650 pieces per hour as they came down the slide. So hot I'd start to hallucinate.

@riverrat4631 Год назад

Hey Brian, I worked at one of the oldest and largest power sports dealerships in Indiana. New Honda, Suzuki, Kawasaki and used Harleys. Back in the 90’s we had 200-300 used motorcycles on hand about all the time. We had a dealer friend in Hawaii that would come over and buy 40-80 used bikes every summer. We could fit 40 street bikes in one 40 foot shipping container. We put the first row of 20 bikes in and strapped down. Then used 4x4’s for legs and 2x4 cross bracing with 1/2in plywood for a second deck. We had a special platform built to lift bikes up to the second deck. We would push bikes in and slide the rear tire around so all bikes was strapped down sideways on each level. We could load 20 bikes on each level. Hawaii only gets so many new bikes a year to their dealerships. So that means used bikes bring a premium. We sold Big Island Yamaha 1-2 containers every year through most of the 90’s. He was paying us close to retail, plus had to pay a import tax and still made good money. I remember him saying he made on average $100-$125k on each container. That was a lot of money in the 90’s. We had to unhook all batteries and drain all the fuel to make the container legal to ship across the ocean. We never had one bike damaged in shipping that I remember. The container was hauled to Mobile Alabama and loaded on a ship, then the ship went through the Panama Canal. Each load took 4-6 weeks to get from Indiana to Hawaii. This video brought back memories of loading bikes and building floors in a shipping container. Cool video 🇺🇸🦅✈️