But they can bring it in the least expected place so if a robbery happen then they won't pick a dirty container because who would guess a half million dollar car is in it
Umm actually they do transport cars to another country like this, I work at the port of Miami, I’ve seen gt3 rs go into a shipping container by customs border patrol
Booking a charted flight for a car can take like 6 months and by that time the newer model is out, if you wanted to fly it asap its a lot of 💰. It's easier to pay the higher insurance and get it in 45 days on a boat. That's if this car wasn't stolen and shipped illegally
They usually ship these in big ships that are made for caring a bunch of cars and then once they get off the ship, they’ll put them on a train. That’s how they do that looks sketchy doing it like this.
Ya im sure every rolls royce owner buys a three hundred thousand dollar car and hires a $2 moving company that ships in a shipping container and uses random wood blocks to unload it and prevent it from moving.
The paper outside is in Bahasa Indonesia It seems whatever was in the container had some problem since that paper is from the Direktorat Bea Cukai or Indonesian Custom. Indonesian Custom only put the paper on a problem shipment.
I have done exactly this work it,s not easy. The container is very narrow so you have to climb in truth the window to get inside the car if it’s a wide big car. With a smaller standard car you can open the door but not fully open. Sometimes they stacked 4 cars in 40 foot containers 2 standard cars on the bottom and 2-cabriolet with roof down on built up wooden ramps and rails on the top second floor. From second floor was ramps or forklift down to get the car out of the container. After you have taken the 2 cars out on first floor from the container. Steal container ramp is safer and better than the planks used in front of the container in this video.
1. What is meant by semimolar and decimolar solutions? 2. Which method is adopted for expressing the concentration of a solution, when the number of components in solution are more than two? 3. Which of the following is a dimensionless quantity: molarity, molality or mole fraction? 4. Why aquatic animals are more comfortable in cold water than in warm water? 5. How is the concentration of a solute present in trace amount in a solution expressed? 6. Which aqueous solution has higher concentration 1 molar or 1 molal solution of the same solute? Give reason. 7. Calculate the mole fraction of ethylene glycol (C2H6O2) in a solution containing 20% of C2H6O2 by mass. 8. Calculate the molarity of a solution containing 5 g of NaOH in 450 mL solution. 9. Calculate molality of 2.5 g of ethanoic acid (CH3COOH) in 75 g of benzene. 10. Calculate the mass percentage of benzene (C6H6) and carbon tetrachloride (CCl4) if 22 g of benzene is dissolved in 122 g of carbon tetrachloride. 11. Calculate the mole fraction of benzene in solution containing 30% by mass in carbon tetrachloride. 12. Calculate the molarity of each of the following solutions: (a) 30 g of Co(NO3)2. 6H2O in 4.3 L of solution. (b) 30 mL of 0.5 M H2SO4 diluted to 500 mL. 13. Calculate the mass of urea (NH2CONH2) required in making 2.5 kg of 0.25 molal aqueous solution. 14. Calculate (a) molality (b) molarity and (c) mole fraction of KI if the density of 20% (mass/mass) aqueous KI is 1.202 g mL-1. 15. Concentrated nitric acid used in laboratory work is 68% nitric acid by mass in aqueous solution. What should be the molarity of such a sample of the acid if the density of the solution is 1.504 g mL-1? 16. A solution of glucose in water is labelled as 10% w/w, what would be the molality and mole fraction of each component in the solution? If the density of solution is 1.2 g mL-1 , then what shall be the molarity of the solution? 17. How many mL of 0.1 M HCl are required to react completely with 1 g mixture of Na2CO3 and NaHCO3 containing equimolar amounts of both? 18. A solution is obtained by mixing 300 g of 25% solution and 400 g of 40% solution by mass. Calculate the mass percentage of the resulting solution. 19. An antifreeze solution is prepared from 222.6 g of ethylene glycol (C2H6O2) and 200 g of water. Calculate the molality of the solution. If the density of the solution is 1.072 g mL-1 , then what shall be the molarity of the solution? 20. A sample of drinking water was found to be severely contaminated with chloroform (CHCl3) supposed to be a carcinogen. The level of contamination was 15 ppm (by mass): (i) express this in percent by mass (ii) determine the molality of chloroform in the water sample. 21. If the density of some lake water is 1.25g mL-1 and contains 92 g of Na+ ions per kg of water, calculate the molarity of Na+ ions in the lake. 22. If the solubility product of CuS is 6 × 10-16, calculate the maximum molarity of CuS in aqueous solution.
Actual fact: the most expensive rolls royce cullinan is in Dubai at f1rstmotors and it is tuned and modified by Mansory, it has actual gold on it making it the most expensive and even rarer than the one on this video
Exactly! They haven't made a good looking, "proper" Rolls Royce since the company was sold. They peaked with the 1968 Silver Cloud III and were going very slowly downhill from then, but when they sold the company, they just dropped off a cliff. The Rolls Royce badge should NEVER have been put on an SUV. Just like the Bentley Bentayga, a triumph of style over substance.
It's stolen, theres a still visible Atlanta perhaps? Valet ticket shown for a second and the shipping container is marked Indonesia. Someone stole this car and shipped it to another country where it can be fitted with a fake vin and title.
For everyone who is misinformed he reversed it in the container they took the video chopped it up. They didnt show when he came out of the spare tire we all know they do not have.
So much about this is Sketchville. Dude cutting the straps, waving that crowbar around, not showing the guy climbing in the window, and shipping a car like this in a container to some 3rd world local. Sketchville. And that board they're using as a ramp, resting on 1/2" of the edge. Good lord.