Тёмный

Motion control camera crane improvements completed 

edu puertas
Подписаться 139 тыс.
Просмотров 120 тыс.
50% 1

Stop motion animation camera movements are extremly hard to perform. I did it manually in the past and at a point I decided I needed to build something to achieve more freedom and easyness to make them. With no money I made that frankenstein, it works with some issues I tryed to improve on this video. Hope you enjoy.
► Become a Patron: / edupuertasfruns
LAST VIDEO:
ru-vid.com?video_id...
Music by:
David Cutter Music - www.davidcuttermusic.co.uk
Jeff Kaale - / jeff-kaale
Enjoy and have fun animating a little every day!!
Comments and questions are welcomed here.
-----------
FOLLOW ME;
on / edupuertasfruns
on / eduard.puertasanfruns
My Animation Studio: www.citoplasmas.com
My Animation Armatures: www.kineticarmatures.com
------------
PARTS I USED- (affiliate)
GEAR RACK; amzn.to/2hyF0Au
GEARS; amzn.to/2ieQYzR
------------
THE GEAR I USE (affiliate)
CAMERA, Canon EOS 80D ; geni.us/GdVo
WIDE LENS, Canon 10-22 mm; geni.us/gk25
NICE ZOOM, Canon EF 24-105mm; geni.us/YWJZ
MACRO LENS Canon 60mm; geni.us/Znz5j
MICROPHONE, Rode VideoMic; geni.us/qf33P
WIRELESS MICROPHONE, Rode; geni.us/4dlSf
SD CARD, SanDisk Extreme PRO 64GB; geni.us/U09Xb
DJI OSMO ACTION; geni.us/zDfvsu
TRIPOD, Manfrotto MKBFRA4-BH BeFree; geni.us/MGII6
MAGIC ARM, Manfrotto 244 Magic Arm; geni.us/E8DBG
SUPER CLAMP, Manfrotto 035; geni.us/E8DBG
GEARED HEAD, Manfrotto 410; geni.us/P7KQJeB
LED LIGHT LUME CUBE; geni.us/DvB3nx1
SOFTWARE, Dragonframe: geni.us/ZSra56
#stopmotion #diy #edupuertas

Развлечения

Опубликовано:

 

8 ноя 2016

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 199   
@dannyoktim9628
@dannyoktim9628 7 лет назад
Your excitement when your rig's vertical motion worked was priceless. . . moved me. Great rig, out and out smart guy you are!!
@edupuertasfruns
@edupuertasfruns 7 лет назад
That is because I had to much problems with that axis in the past that it makes me extremly happy to see it work proppertly.
@tawfiqmohammad575
@tawfiqmohammad575 5 лет назад
Bro you deserve all the Applause and encouragement
@glumpy10
@glumpy10 7 лет назад
You sir, are my definition of genius! Fantastic work and engineering. you really are an inspiration with this and come across as a really nice fella to boot. Well done and I wish you every success you deserve in your work and life.
@tommasha
@tommasha 4 года назад
Using bearings at the base to hold and allow for rotation was genius
@wild-radio7373
@wild-radio7373 2 года назад
Freaking best thing on the interwebs !♡♡♡
@andresahunca
@andresahunca 2 года назад
Wow man! Awesome!
@jims408
@jims408 7 лет назад
¡Increíble! I truly admire your smart *and* creative approach to solving problems!
@joecash5544
@joecash5544 4 года назад
First impression, very friendly and shows passion in his work. That is genius work!!
@TheRealStructurer
@TheRealStructurer 3 года назад
Great video. Thanks for sharing!
@fluffyfish09
@fluffyfish09 7 лет назад
Great setup. Nice to get rid of those whiny stepper drivers. Awesome that you did it yourself.
@indymogul
@indymogul 7 лет назад
Awesome rig!! What program are you using to control the moco rig? Thanks!!
@edupuertasfruns
@edupuertasfruns 7 лет назад
+Indy Mogul Dragonframe, it is the standard for stopmotion animation, what I use it for.
@marcmediapro5539
@marcmediapro5539 7 лет назад
you should make an episode with him :) , or work with him on a project !
@rjmunt
@rjmunt 7 лет назад
Amazing work edu!
@mw9558
@mw9558 7 лет назад
Very nice project! It looks very well designed and build
@ddascott
@ddascott 7 лет назад
inspirational...keep the videos flowing
@vthrash7832
@vthrash7832 7 лет назад
Edu esta maquina es GENIAL!!! sos un genio!. Se ve impresionante y funciona a la perfeccion. Felicidades!!1
@usmanshabbir2530
@usmanshabbir2530 6 лет назад
Awesome 👏👏👏👍
@funkiEst
@funkiEst 7 лет назад
Voy a seguir tus pasos, que lo sepas.... enhorabuena tio, admirable trabajo, espero verlo en acción...
@fredericgeraud76
@fredericgeraud76 6 лет назад
love the "Oooh yeah cool" moment :-) Great Job!
@esotericsean
@esotericsean 7 лет назад
Amazing!
@BikersGarage101
@BikersGarage101 7 лет назад
Edu... I love your videos man! I'm very much into photography myself... not at this level for sure but dude, this awesome! And to top it all off, you had the courage to do these in english. Good for you my man!!! Thumbs up from Alicante...biker's paradise! PS: you are the first channel Biker's Garage 101 subscribes to!
@edupuertasfruns
@edupuertasfruns 7 лет назад
+Biker's Garage 101 thanks for the suport. It is true that making this channel in english is harder and it may sound terrible for an english speaker, but I want to share it and this is the only way. Thanks for your subscription
@LotteStarck
@LotteStarck 4 года назад
All your innovations and improvements are just so technical cool - thx!
@waelwm4331
@waelwm4331 5 лет назад
Hidden gem
@ZeedijkMike
@ZeedijkMike 6 лет назад
Wow! Artwork in motion.
@09marcius
@09marcius 7 лет назад
super cool ;D
@Allan_aka_RocKITEman
@Allan_aka_RocKITEman 4 года назад
Great work!
@Pedriyu
@Pedriyu 7 лет назад
Increíbles tus vídeos y proyectos! Sigue así! :D
@studiovanilla
@studiovanilla 6 лет назад
Crazy professor! Good work!
@erichertsens
@erichertsens 7 лет назад
very cool, awesome job.
@yoyodrone7087
@yoyodrone7087 7 лет назад
Cool project! Nice to see you are using 3D printed parts.
@Carwyn.Morris
@Carwyn.Morris 5 лет назад
very cool!
@motionsick
@motionsick 7 лет назад
Nice
@VectorCoCinema
@VectorCoCinema 6 лет назад
Bro you're a genius, so much talent!
@edupuertasfruns
@edupuertasfruns 6 лет назад
+Armando Rodríguez thank you man
@WhiteCrowFarm
@WhiteCrowFarm 7 лет назад
I wish i could come and hang out with you and work with you on a project! You're doing some amazing work! Thanks for sharing!
@rp.aguilera
@rp.aguilera 3 года назад
No puedo creer que sólo tengas 100K subs!!! Mereces 10M!!!
@Mr_Graphic
@Mr_Graphic 7 лет назад
I like the bearing that you made, cool ...
@mylongbrothers
@mylongbrothers 7 лет назад
pretty cool job. congrats
@panchyajanya
@panchyajanya 7 лет назад
you are a genius! I'm very inspired by watching your videos. keep going Alll the very best
@edupuertasfruns
@edupuertasfruns 7 лет назад
Hey Bhushan, thank you very much! ;)
@bartgaffer
@bartgaffer 6 лет назад
Eres un Genio Edu
@hillonetwork
@hillonetwork 7 лет назад
Nice one really good work
@JoseRamirez-ij1mu
@JoseRamirez-ij1mu 6 лет назад
¡Sigue así crack!
@BikerNic
@BikerNic 6 лет назад
Another epic diy jib/slider combo. Wow, your good.
@edupuertasfruns
@edupuertasfruns 6 лет назад
+AneMotion-HD thank you !
@ATLaboratory
@ATLaboratory 7 лет назад
Very very impressive! Thousands of likes! :D
@PlatonStudio
@PlatonStudio 7 лет назад
Great work man! You should totally do a timelapse with this machine :D
@adwait_natu
@adwait_natu 3 года назад
Great great great! I'll love to work with you on stuffs like these!
@VortexMotiveVision
@VortexMotiveVision 4 года назад
Awesome system! I'm planning to build one myself.
@edupuertasfruns
@edupuertasfruns 4 года назад
Go for it
@diymyway6372
@diymyway6372 7 лет назад
I don't normally swear but you are a fuckin genius
@D4rkluz
@D4rkluz 7 лет назад
nice job awesome
@timetowoodworking4965
@timetowoodworking4965 7 лет назад
Hey, man, you're a genius))))
@JOEBLACK1979
@JOEBLACK1979 7 лет назад
Tio eres un crack!
@EduMrTeiks
@EduMrTeiks 7 лет назад
Eres un genio, la verdad que tengo muchas ganas de aprender arduino y llevarlo a la práctica. Un saludo
@edupuertasfruns
@edupuertasfruns 7 лет назад
Eduardo Madrid se puede hacer de todo.
@jasonkaran7029
@jasonkaran7029 7 лет назад
Amazing again!very nice crane!we are waiting for your next project!!!
@jasonkaran7029
@jasonkaran7029 7 лет назад
Is it possible to provide us some more information on where you found these worm gears and the housing? I could not find it anywhere!please
@edupuertasfruns
@edupuertasfruns 7 лет назад
The gears are from germany I can't remember the company but search for worm gears. And the housing I drawed it and 3d printed in plastic.
@edupuertasfruns
@edupuertasfruns 7 лет назад
+Jason Karan I founded, it is called maedler
@jasonkaran7029
@jasonkaran7029 7 лет назад
So, that explains everything, I believe all of asking for the worm gears were mostly looking for the housing you printed!thank you, I think I need to buy a 3d printer, first. I would like to ask you if you faced any problems with the stability/strength of the housing?
@JonatanContrerasjononthemoon
@JonatanContrerasjononthemoon 7 лет назад
Increíble.
@younakim7325
@younakim7325 7 лет назад
you must be a genius! it is so amazing work. thank you.
@edupuertasfruns
@edupuertasfruns 7 лет назад
I just work hard, Thanks!
@statikshotz9558
@statikshotz9558 6 лет назад
youna kim people have a warped perception on genius. Genius is a matter of focus, concentration, determination, and thinking. They pour their life into what they are working on and create something amazing. Anyone can do something considered "genius" but instead opt out for watching useless stuff or consuming knowledge and never actually thinking and learning while solving problems. That's just what I think.
@lisinyt
@lisinyt 7 лет назад
Очень интересно!
@ranichandra3409
@ranichandra3409 7 лет назад
Please make an instructalble about it please.....It's just mind-blowing 😘😘😘😘
@Teravito
@Teravito 6 лет назад
molt bona feina!
@iceman1358
@iceman1358 7 лет назад
Cool Vids :)
@Cenpanda
@Cenpanda 7 лет назад
Es genial entrar a este canal. Cuando menos, ya vi dos veces cada vídeo. Resulta inspirador tanto trabajo :) Así como usted elabora sus armatures, ¿también hace las cremalleras y los engranes?
@edupuertasfruns
@edupuertasfruns 7 лет назад
+Cenpanda las cremalleras y engranajes los compro.
@satyambhujan230
@satyambhujan230 6 лет назад
You are the best... MIllions of like
@AndyX000
@AndyX000 7 лет назад
Que buen invento! llevo un tiempo detrás de una dolly crane, pero pienso que si usas motores brushless y reduciendo con poleas te libras del ruido de los motores de paso a paso Un saludo
@BeatRush2011
@BeatRush2011 7 лет назад
¡Me gusta mucho! Somebody needs to connect this to a HTC Vive or other VR headsets with a live feed and motion tracking! You could really "be" in another location at the exact moment!
@edupuertasfruns
@edupuertasfruns 7 лет назад
Cool but it really exceeds my knowledge, jaja
@screamingshih-tzuproductio4567
Thank you so much for generously sharing your great work! It is really an inspiration. I have watched all your videos many times and have learned a lot from them. If you could, would you please explain in detail the wiring of the Microstep Driver ST-M5045 to the Arduino? (I am trying to wire it and seem to have only one direction working) The detailed video you did on the Pololu A4988 was extremely helpful. Also how do you have the 4 stepper drivers connected to the power supply? Again, great work and thanks for giving your time!
@edupuertasfruns
@edupuertasfruns 7 лет назад
Thanks, search for diagrams on internet for that driver. If you still don't find the problem mail me and I will try to help you. keep going!
@somestepsofstopmontionanim5154
Brother! Thanks for help
@harrydwyer
@harrydwyer 7 лет назад
This is immense. Makes me want to get building. How steady is it? Can you reliably move forward and back through a shot and keep shooting?
@edupuertasfruns
@edupuertasfruns 7 лет назад
For stop motion it is steady, because everything is slow so you don't have strong moves that could make the thing shake. You can go back and forth, provably there is some backlash in some of the axis but nothing too big for us frame by frame.
@harrydwyer
@harrydwyer 7 лет назад
Perfect, i'm going to have to fire up the Arduino. Also I might be in the market for one of your winders.
@edupuertasfruns
@edupuertasfruns 7 лет назад
Great, see you there!
@fabianweiss2259
@fabianweiss2259 6 лет назад
Tremendo Edu! Una pregunta, de donde te sacas todas las piezas!?
@haidarsyriaismyheart5945
@haidarsyriaismyheart5945 7 лет назад
you are very smart man😍😘😘
@leoroam2770
@leoroam2770 7 лет назад
control camera crane is a complete design to animate our puppets or anything you want!! But the hardest system to create this is not for someone with a few things. Muy bueno tu trabajo lastima no contar con estos implementos maquinarios para realizar mis animaciones con las nuevas creaciones que ya estan casi listas..Tu tienes todo para esto y sale a la perfeccion igual yo estoy contento porque al descubrir como hacer titeres de animacion con diferentes tipos de poses es para mi gratificante ya que siempre quise una figura completa y desde que descubri el stop motion me he animado a crear y a animar solo me gustaria saber si puedo animar de una forma super super economica ya que no tengo lo suficiente y montar mis videos de mis trabajos
@moracabanas
@moracabanas 7 лет назад
Te animo a que aprendas arduino. La gran ventaja es que una grua como la suya, profesional, costaría varios miles. un arduino cuesta 10€ los stepper de 5 a 10 cada uno, los drivers puede variar pero en ese rango de precios. la fuente de 30W 25€ porque tengo una igual. los rodamientos menos de 20€ todos junto con los acopladores. Lo que puede que sea caro son los perfiles de aluminio, pero ahi puedes probar más materiales. Con herramientas menos caras que las que usa pero un poco mas de paciencia puedes conseguir el mismo resultado.
@mihmih666666
@mihmih666666 7 лет назад
Please do video, how to connect the program to the motor, how to operate a computer!!!
@sameerhejen
@sameerhejen 5 лет назад
What kind of metal using and one more can you. Make auto camera tracking
@magicmarker1369
@magicmarker1369 7 лет назад
Good day could you please provide some more information on the rack and pinion gears you used in this video and possibly where they were purchased? thanks, and love the innovations!!!
@edupuertasfruns
@edupuertasfruns 7 лет назад
+magicmarker1369 This night I will try to add some links on the description for you.
@RusNovgorod
@RusNovgorod 6 лет назад
Классно!)
@MrMorbo83
@MrMorbo83 7 лет назад
Красава так держать!
@haiderabbas1832
@haiderabbas1832 7 лет назад
wow man that was awesome.... what course do I have to take if I want to do the stuff you did in the video
@edupuertasfruns
@edupuertasfruns 7 лет назад
+Haider Abbas what I do here is very specialized, dificult to teach. If you want to learn about stop motion and a basic approach to motion control, I teach in a Master degree in stop motion in Barcelona. www.baued.es/en/studies/masters-and-postgraduate-degrees/masters-in-stop-motion-animation
@boxerkumpels
@boxerkumpels 7 лет назад
Me refiero a la rotación de 90 grados mientras lo hacían. como se fijan las ruedas? En mi máquina CNC Quiero construir 5 ejes, dos son para ser girado 180 grados.
@giorgos8324
@giorgos8324 7 лет назад
all your videos are nice and interesting!!! i would like to know how you make the base that can rotate all the item 360 degrees on the slider. could you please help me? i am working for a school project. thank you!
@edupuertasfruns
@edupuertasfruns 7 лет назад
+Giorgo's LAB Greece I don't know how to help you, it is a little of mechanics and time to put all together
@marcmm2014
@marcmm2014 7 лет назад
Me encanta lo que haces! Estoy interesado en montarme un sistema similar al tuyo, pero quiero empezar por el slider... Algún consejo sobre donde comprase los materiales o donde puedo ver las medidas?? Gracias!
@edupuertasfruns
@edupuertasfruns 7 лет назад
+Marc MM hola, igus es una buena marca calidad precio para comprar componentes para sliders.
@fedebaroni8875
@fedebaroni8875 7 лет назад
Edu!! Excelenteeeeee es muy bueno. Lo único que te voy a preguntar, cómo calibra el Software el enfoque de la cámara de fotos? Vi que tiene una correa que hace girar la lente. Pero cómo sabe el software cómo tiene que enfocar? Te felicito, Saludos
@edupuertasfruns
@edupuertasfruns 7 лет назад
El software no lo sabe, tienes que poner tu mismo los valores de enfoque de punto a punto, de inicio del movimiento de camara a final. Realmente es como cualquier otro motor en la grua, tu controlas como quieres que se mueva ese eje a lo largo del timeline. Saludos
@fedebaroni8875
@fedebaroni8875 7 лет назад
Perfecto, una genialidad. Saludos!
@tusbackingtrackes
@tusbackingtrackes 7 лет назад
edu puertas podrias utilizar el sensor de ultrasonidos de arduino puesto sobre la camara y segun la distancia del sujeto gire n grados el servo del enfoque y asi tenerlo automatizado. Un saludo y espectacular trabajo.
@x_mouzzer_x
@x_mouzzer_x 7 лет назад
Good job! 3d printer can help you in the business. Very cool, good luck dude.
@DSLRDIY
@DSLRDIY 7 лет назад
Amazing Video!!! thanks for sharing your work!. One question, where did you buy the gear worms? The one you used for the rotation of the Jib and the ones on the motorized head for the camera. I can't find those kind of gears. Thanks
@edupuertasfruns
@edupuertasfruns 7 лет назад
+Pedro Callisaya I import them from germany, search for worm gears in google
@DSLRDIY
@DSLRDIY 7 лет назад
edu puertas Thanks, would you please post the link or the name of the store?
@samuelschaffhauser3664
@samuelschaffhauser3664 4 года назад
Hi! What is the ratio of the worm gears on the camera head?
@luthfi0286
@luthfi0286 7 лет назад
good works, very cool sir. by the way, are you learn these things (electronics and mechanics parts) in this (or others) video by yourself (autodidact)? or by your educational experiences? if educational experiences, may i know your educational background in short explanation (from the beginning until now)? I'm just curious and want to know, if you don't mind, thank you.
@edupuertasfruns
@edupuertasfruns 7 лет назад
+muhammad luthfi I am a product designer but most of what I do is autodidact, a lot thanks to youtube community
@luthfi0286
@luthfi0286 7 лет назад
oh i see, so the community have the big role of your skill improvement? Keep do the great works sir, these very awesome!
@ThanasisProtatos
@ThanasisProtatos 7 лет назад
Your work on the arduino moco is inspiring Eduard! Im trying to set up my own system and I just wanted to ask you what stepper motor you would suggest for focus. Im thinking nema11 or nema14 with high torgue (1.2-2.5kg.cm) Would that be enough for focusing? Keep it up!!!
@edupuertasfruns
@edupuertasfruns 7 лет назад
Thanks!! that really depends on your lenses, some of them are really loose and some very tight. I would go for the nema 14 to be sure, anyways for a focus I would suggest a gearbox or a good stepper driver to allow you more microstepps. Hope you succeed!!!
@ThanasisProtatos
@ThanasisProtatos 7 лет назад
Yes I know what you mean! Its always better to have more power even if you dont use all of it! Much appriciated!!!
@DSLRDIY
@DSLRDIY 7 лет назад
Por favor Edu, podrias pasarme los links donde compraste los engranajes (Worm Gear) no puedo encontrar ningun distribuidor. Gracias
@edupuertasfruns
@edupuertasfruns 7 лет назад
+Pedro Callisaya la empresa se llama maedler, està en alemania.
@cigp
@cigp 7 лет назад
amazing, where do you buy all those nice metal gears and aluminium plates?
@edupuertasfruns
@edupuertasfruns 7 лет назад
+ciro gracia all on internet, just searching for worm gears and similar.
@louis123efx
@louis123efx 4 года назад
Hi , is this motion control dose only stop motion or can do live camera shoot with motion control ?
@thekaiser4333
@thekaiser4333 2 года назад
Is the precision of the repetiton of moves below or above 1mm?
@wepar2
@wepar2 7 лет назад
Ad video en español!!! Jajaja son muy buenos
@looongh9794
@looongh9794 7 лет назад
You should move to Hollywood
@teomangonen
@teomangonen 6 лет назад
hey edu I have a motion head it can make pan and tilt, it has DC motors not step motor today I try to connect to it to dragon frame for it I bought dc motor drivers(L298)but I didnt work. I thing here is the problem dragon frame let me connect with 2 digital output one is direction one is pulse but for dc motor driver has two cable for direction also two cable for speed or I make some mistake I didnt solve it can you help me ?
@edupuertasfruns
@edupuertasfruns 6 лет назад
The easiest would be to use stepper motors.
@nemod3338
@nemod3338 4 года назад
I'm impressed with your engineering skills. How did you ended up doing animation. Knock to some space agencies doors. We need them crisp photos of space objects. Wish you the best.
@edupuertasfruns
@edupuertasfruns 4 года назад
thanks!!!!
@Tom-rn3jr
@Tom-rn3jr 7 лет назад
Which motors are you using and is there a qearbox on the motors?
@edupuertasfruns
@edupuertasfruns 7 лет назад
I use stepper motors nema 23. And yes at some points I have gearboxes, made by myself using a 3d printing machine, bearings and gears to increase the precision.
@boxerkumpels
@boxerkumpels 7 лет назад
Hola Edu. sus videos me gefalen good.the deslizante que se coloca en la cámara me ha interesado más cerca. ¿Hay Detaillfotos de las unidades? Debido a que la unidad se compensa grado en el 90 º Me posiblemente instalar esto para mi máquina fresadora CNC con. ¿Puedo obtener más detalles? saludo
@edupuertasfruns
@edupuertasfruns 7 лет назад
No sure what part are you refering to, I would say all what I use here aren't strong for a CNC. No estoy seguro de a que parte te refieres, però seguro que ninguna es lo suficientemente resistente como para una fresadora cnc.
@boxerkumpels
@boxerkumpels 7 лет назад
Me refiero a la rotación de 90 grados mientras lo hacían. como se fijan las ruedas? En mi máquina CNC Quiero construir 5 ejes, dos son para ser girado 180 grados.
@boxerkumpels
@boxerkumpels 7 лет назад
Hola Edu, Gracias por los comentarios. He adjuntado un enlace donde se puede ver lo que quiero decir. Por favor ver Obtener el Annimation a la vez. Estoy hablando de el ángulo de la cuchilla. Una vez 180 grados. El otro no lo sé. Me refiero en su proyecto listo la cámara también pivotan alrededor de grados, o? saludos Fritz www.kickstarter.com/projects/2003668803/5axismaker-first-ever-affordable-5axis-multi-fabri?ref=discovery
@felicianoabe
@felicianoabe 5 лет назад
Lol sounds like dial up brings back memories haha
@yoniimusic
@yoniimusic 7 лет назад
You should make business out of this
@sidekick3rida
@sidekick3rida 7 лет назад
where do you get your gears and other parts from?
@edupuertasfruns
@edupuertasfruns 7 лет назад
+sidekick rida from industrial suppliers, normally from germany. Just goegleling
@ansonhou2756
@ansonhou2756 6 лет назад
That's Awesome! you must be a genius!! it inspired me a lot. May i know how to make 6 motors connect the Arduino? Thanks!
@edupuertasfruns
@edupuertasfruns 6 лет назад
Using stepper drivers
@themikeymikechannel2947
@themikeymikechannel2947 7 лет назад
can you add longer arms to it?
@edupuertasfruns
@edupuertasfruns 7 лет назад
+THE MIKEY MIKE CHANNEL I don't think so
@themikeymikechannel2947
@themikeymikechannel2947 7 лет назад
edu puertas i know you can do it. plus , you made a camera crane and im making one for time lapse videos and photos. every thing that your using is what i need to complete my project. :-D
@Pinki87
@Pinki87 4 года назад
больше видео , больше DIY !
@lordofthebricksproductions4288
What lens do you use for stopmotion and can you give me a link to it?
@edupuertasfruns
@edupuertasfruns 7 лет назад
+Lord Of The Bricks Productions we use diferent lens for each need. Prime lens if possible if not zoom lens. For brick films I would recomend you a Macro lens. Wich brand do you use, the 60 mm canon lens is nice.
@lordofthebricksproductions4288
Thanks i use a canon and i've been looking for a lens for stopmotion for a while now thanks i'll look in to that
@edupuertasfruns
@edupuertasfruns 7 лет назад
The most versatile is the 24-105L it is expensive but good glass, if you have a full frame good choice also.
@Studio-vd3ly
@Studio-vd3ly 7 лет назад
Genius, what software are you controlling? How is Arduino's code written? So amazing.
@edupuertasfruns
@edupuertasfruns 7 лет назад
+Dylan Leung Dragonframe, my last vídeo is about this software. Code comes with this program
Далее
Making a $30 HDMI Camera Monitor
8:28
Просмотров 205 тыс.
Homemade circular camera movement
11:29
Просмотров 63 тыс.
Smaller than a Sharpie
16:15
Просмотров 12 тыс.
All About MOTION CONTROL!
32:08
Просмотров 15 тыс.
Micro Jib | A Camera Crane that fits on your desk
8:03
[DIY] Making camera robot (8 axis motion control)
10:20
Perfecting My DIY 3-Axis Camera Slider!
7:42
Просмотров 70 тыс.
Our first kickstarter!!! Will it work?
10:23
Просмотров 8 тыс.
Оцените переход от 0 до 10🤣
0:14
Найди Влада на стадионе
0:26
Просмотров 3,7 млн
Кошки не нарушают закон😂
0:34