Motorcycle DETAILING 101!  

More to come

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dMKdmXxMz6I.htmlsi=OEaia0rDbgmz5_WB

lol you know it!

Thanks for the questions. 1 your choice 2 yes 3 our metal coating is a better choice 4 it’s extremely thin, use caution. 5 yes remove them.

Great questions!

Great idea!

Good idea.

Thanks David! What do you like about it:) I found it incredibly tedious lol. -Nick

Have fun with the HD!

Are you volunteering your bike?

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xZMZKCp9D5Y.htmlsi=rlnpXjFRnFZjawvt

Your choice

We like MJJC for optimal foam

DIY Detail Rinse Less Wash is perfect for that

@@diydetailofficial V2 it is! Thank you! 😊

Yes,you can

Air filter

I wouldn’t spray a coating unless you’re wearing a full PPE suit, and in a paint booth. Coatings are easily absorbed into the skin. When I see videos of Detailers applying coatings with a cheap mask, in short sleeves I feel sorry for them, it’s a very real health risk when they are atomized so finely. For the engine etc, apply DIY Detail Quick Beads everytime you wash. Yvan

@DIY Detail I do have all the necessary PPE, including the suit with hood and commercial quality, OSHA approved, 3M dual cartridge respirator & goggles/gloves. I'm only spraying the main block area in under a minute, but yes, I will be fully protected. So in my situation, can you still let me know if your metal coating will self-level after spraying or need wiped? 🤔 I hold you & DIY Detail harmless and assume & accept full responsibility for my actions & alternative application of the product. 🤓

We have never sprayed it, but it will need to be wiped

@DIY Detail Thanks Yvan, I'll send ya an action shot when I'm all suited up.🙂

No need for 2 buckets when foaming twice.

Check with a local insurance broker

@@diydetailofficial is it considered “general insurance”?

Garage keepers

True

Sorry I don’t understand the question:)

@@diydetailofficial Add a rinseless wash solution to your sprayer if you do not have distilled water?

Yes that will help in drying and preventing water spots, but unlike using distilled water you will need to towel dry.

@@diydetailofficial Thanks!

Our pleasure.

We only used the RO for the final rinse.

Not unless you’re in a paint booth with full hazmat ppe. Coatings are very toxic when they get on your skin.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ytLj96QDfHg.htmlsi=f5zBlOd5rILVnuKN

I airbrush ceramic all the time. No problems at all…

ACF 50 is for corrosion on electrical components. DIY Detail Quick Beads is fine on brakes, the first few seconds of application wears it off.

@diydetailofficial I am grateful for the reply. Thank you so very much and have a lovely day.

Do what works for you:)

You can, but spraying any ceramic coating is very dangerous for your health. Yes, 4 years or much more.

@@diydetailofficial Awesome...yes, I have organic vapors painting respirator while spraying.

You need full skin protection as well. Spraying a ceramic coating is not to be taken lightly.

@@diydetailofficial Thats why you guys rock! Would one of those white paint suits from HDepot work or do I need to visit my local automotive paint supply?

Go to your local PBE

Thank you

Refer to the manufacturer’s instructions.

Thank you

A dedicated metal polish, and to protect DIY Detail Metal Coating.

0000 steel wool

Heat isn’t an issue, yes DIY Detail Quick Beads everything!

Yes

Glad you enjoyed it!

Nice! What was your process?

@@diydetailofficial all clean pre-rinse followed by Rinseless wash and some brushes! I had 1 happy customer thanks to your products. 🔥

Thank you sir!

@@diydetailofficial no, thank YOU 🤙🏼

You csn

Thank you

No fears

Lifts are nice, which one do you use?

@@diydetailofficial I just have a cheap one that doesn't even have wheels. Nicer ones are available several places, Harley dealers, Harbor Freight, etc.

Use a good leather conditioner.

Agreed, our pressure washer is adjustable

This was a minimum $1500 service

@@diydetailofficial thank you so much for sharing that. I think those similar numbers in my head but then wonder if there is a market for it… I’m sure there is, but that’s a big number in my head. This wasn’t even a dresser, no bags to remove or clean no side covers, even the seat off a ultra or street glide adds another 1/2just to remove and reinstall, that’s not even adding cleaning there. I’ve never had my bike detailed, I do that each winter when I can’t ride. The dealer calls it a detail when they clean it after a service… then I go home and clean up their cleaning! LOL. They charge $25 to do a S100 spray and rinse. It’s a great product, but I can get 3jobs out of a can and it costs me less to by the product and I finish the cleaning up with a wash and dry after I do it. That’s just maintenance after a ride or before I go somewhere I want it to shine! I appreciate your time guys and find myself somewhat addictive to your channels. I found my way to TSO in Vaughan last week and bought a starter pack of DIY supplies to start playing with. Great job with the products and videos! You really are making a difference. Pete

Thanks Pete.

@@diydetailofficial1500 USD? What lol I do better than that myself

​@joshuaramos9676 Right. For $1500, I'll just skip a few washes and buy a brand new bike.

You're welcome

Yes

Yes, but just not in this video.

True

Whaatsss !?

@@mariosantiago8931 😄😄no he tocado motoras

@@1stfrompuertorico568 Lo que pasa con las motoras ès que los dueños las cuidan bien y ellos mismos la detallan , y como da tanto trabajo pues casi nunca la llevan a un detailer profesional...🇵🇷☕🇺🇸

@@mariosantiago8931 Sí, eso depende del dueño y casi ninguno lo trae para hacerle una mejor protección hasta el momento que se dan cuenta de tanto daño que tiene para a lo mejor exhibirla o venderla.😄😄

Cool video guys!

Thank you

Makes the tires slippery causing potential accidents, safe first!

Exactly

🙏🏻🙏🏻🙏🏻

No fear, it’s actually safe

I was the same at the beginning but then you think motorcycles are design to be riden in the rain right? I just double make sure I blow all water out of electrial components

Adding a ceramic coating will make them easier to clean off.

We strive to improve

🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻