Mountain Flight Testing Flywoo Explorer LR 4 inch micro long range fpv drone 

I bought it too. What do i have to do wehen it arrives? Can i just connect it to my radio and goggles to fly or do i have to do much configs on my radio and the drone with betaflight. Have a nice day 😊

Ps i orderd the pnp version What does that mean? Im new to the hobby🙈

PNP means plug and play which sounds misleading because it actually means your quadcopter will arrive without a control link receiver or in the case of a DJI PNP it means the DJI video system (ie. Caddx Vista or DJI Air Unit) and a control link receiver is missing. It sounds like you bought the Flywoo Explorer LR HD Vista PNP model which means you need to purchase and install your own DJI Caddx Vista video system and if you do not have the DJI radio remote controller then you will also need to purchase a control link receiver which matches the radio protocol of your transmitter remote controller (ie. Frsky, TBS Crossfire, Spektrum, Futaba, etc.) A fully assembled, ready to fly model is called a BNF which means Bind and Fly. Unfortunately, if you are brand new to FPV this process of installing and configuring your own DJI FPV video system into a PNP Explorer LR model can be challenging. Many good youtube videos and of course the great FPV community here and on other FPV channels can help you.

@@m2kfpv449 ok and how do i know which reciever matches my radio? And would i have to do anything with a BNF drone on betaflight or something or can i really just bind it to the radio and fly? Thanks for helping me 🙃

I bought the analog version. How can i connect my fatshark goggles to the drone? Does it do it itself when i turn on both and bring it it into binding mode or something?

Thanks. Antennas are ImmersionRC SpiroNet LZR dual patch system

RSSI for R9 915mhz can be deceptive as you can easily go out miles on what looks like 40 or 50 RSSI. LQ and RSSI together tell a better story which is +1 for CRSF. I was more worried about 400mw analog 5.8ghz video coming up on 2 miles out.

I guess so. Im pretty impressed. Soon they will have 2.5" drones doing this. I have 2 r9mm recievers in 2 on my 3" drones. I really haven't range tested them to this extent. Although I expect they will be ok.

Using FrSky R9 ACCESS at 1W dynamic (never hit 1W tx output on this flight). Used 3500mAh 4S Li-Ion pack but you definitely don’t need that big a pack for this short flight. I like the GNB 1100 mAh 4S HV Lipo packs for most LR missions under 5 miles. See my video on this lipo here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dF41t2yB1j0.html

@@m2kfpv449 How are you drawing 88 amps from a lithium ion pack? is that reading wrong?

Fat Shark HDO2 with RapidFire vrx and ImmersionRC SpiroNet LZR dual patch antenna system