Mounting A Used Snowblower Attachment To A Craftsman 917 Series Lawn Tractor

Подписаться 2,3 тыс.

Просмотров 14 тыс.

50% 1

After several videos where we prepped my old Craftsman 917 Lawn Tractor to get a Craftsman snowblower attachment, in this video we finally get to mounting it up.
We had to order various mounting brackets and hardware, but all in all everything was a smooth process.
Only some minor modifications left and it will be all set to tackle the coming winter.
Attachment Model #: 486.24837
Parts Ordered:
Front Mounting Brackets: 25679(Left) & 25678(Right)
3/8 x1" Thread Forming Bolts: 347631
Shoulder Bolts: 48106
Pulley Box Mounts: 64451(Left) & 64452(Right)
3/8 Carriage Bolts: 43350
Clutch Belt: 46989
Clutch Cable Spacer: 23727
Pulley Box Mounting Pins: 43038
Part 1: Fixing the leaky valve cover:
• DIY Riding Mower Valve...
Part2: Front Wheel Replacement and Bearing Upgrade
• Craftsman Riding Mower...
Part 3: Fixing the sloppy steering:
• How To Fix Sloppy Stee...
Part 5: Upgrading and Adding Lighting
• Adding Lighting To The...
00:00 - Intro
01:20 - Installing Front Mounting Brackets
04:18 - Installing The Pulley Box Mounts
06:07 - Hooking Up The Clutch Cable
07:53 - Mounting The Pulley Box
08:36 - Pulley Issue?
09:40 - Mounting The Snowblower
11:29 - Insalled and Testing
12:51 - Outro

Авто/Мото

Опубликовано:

4 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@MrRandyj72 5 месяцев назад

Funny your video shows up after talking with a buddy about rigging up a brush hog type front attachment to my rider to cut tall weeds on my property

@RealManSkills 8 месяцев назад

Exactly the info that I needed. Thanks for all the detail and part numbers!

@TwoFourSevenDIY 8 месяцев назад

Glad you enjoyed it!

@juliagetman Год назад

That’s really great advice about googling the manual when buying used.

@TwoFourSevenDIY Год назад

Manualslib.com is a great resource, free PDF versions of manuals for download.

@juliagetman Год назад

@@TwoFourSevenDIY whoa! I had no idea. Thank you. That’s certainly easier than googling on a wing and a prayer.

@conman366 10 месяцев назад

Ahh yes finally the right video. I found a similar era tractor on the side of the road and just rebuilt the engine. Waiting to see if I can find the right deal on a attachment for these upstate NY winters

@vert5 8 месяцев назад

I have one of the original single stage “snow-throwers”, this thing is BADASS! So much rotating mass, if it gets under the ice it has zero issue chopping and shooting a good distance. Plus no sheering pins to deal with.

@vert5 8 месяцев назад

I too use wheel weights and chains on the back. Kind of wish I had some weight for the front wheels. When the thrower is down it becomes really hard to steer. What I plan to do before installing this season is put my dual LED light kit on and might change the belt(bought the Kevlar ones too). We should be getting a decent amount of snow this season, the last couple only afforded me one or two morning of use. Can’t wait to see what you think of it!!!

@TwoFourSevenDIY 8 месяцев назад

I'm super exited to put it to some use. I've been super busy so I haven't done the last few final touches to it but should be getting to it soon. I've got a plan to use a large concrete block on the rear-end for weight only because I've got the materials on hand and won't cost me anything to try at least

@Dave-df1vu 9 месяцев назад

i had a 45 in craftsmen snowthrower given to me however i installed it on a husquvarna 348 xd lawn tractor. after some adjustment with a cuttting torch and trying to get the brackets i ordered i had to cut some front mounting holes now it fits and the main belt off the blower i think is too long wish you had the routing on it. it throws the belt off, so not sureif i need a shorter one.

@halfasscustoms7131 9 месяцев назад

I got the same snow blower attachment put it on today but it won't lift up the snow blower attachment

@SF-fm7ov 4 месяца назад

Can't help but wonder if you hadn't moved the 2" in the pulley module (because of mower deck size), that not only may your front belt have worked but also perhaps that pulley that you removed might have cleared. Just wondering...

@TwoFourSevenDIY 4 месяца назад

I doubt it, the pulley is just way to small, adding another pulley into the mix would have made the problem worse.

@l.b.7543 6 месяцев назад

Is it possible to attach a different brand blower to different riding lawn mower. For example- craftsman snow blower to an mtd riding mower

@TwoFourSevenDIY 6 месяцев назад

It might be possible if all the mounting bolt hole locations line up

@badandboujee3522 7 месяцев назад

Do you have the part numbers for the pullys themselves im missing them. Guy gave me the snowblower for free, but no pullys.

@TwoFourSevenDIY 6 месяцев назад

the pulleys in the box that mounts under the mower? Its all one assembly but here is a screen grab of the user manual of the exploded view of the assembly and related pulleys i.imgur.com/xAauX7k.png

@jesusferrel1616 6 месяцев назад

Any info on the belt .looked everywhere but no luck.

@TwoFourSevenDIY 6 месяцев назад

No official info. I'm not sure why the manual calls for a 114" belt ... it's not even close in my case. I did however get a 117" belt ... seems just about perfect ... used it today actually, worked great.

@jesusferrel1616 6 месяцев назад

Thats awesome now I know what size to get because I ran into the same issues and no one in my area gave me the correct belt . But thanks for the info

@spudstudios3342 Год назад

if you blow the tranny, replace it with an mst 206, they are stronger than the one in it, and the snow blower may put a lot of load on the rear end and blow it up

@TwoFourSevenDIY Год назад

Good to know! Thanks for the info.

@spudstudios3342 Год назад

@@TwoFourSevenDIY no problem