Тёмный
No video :(

Multiple Problems/Poor Customer Communication (Low Power, Long Crank, Stalling P0171/P0174/P0121) P1 

ScannerDanner
Подписаться 426 тыс.
Просмотров 55 тыс.
50% 1

Link to part 2 (the follow up) • Multiple Problems/Poor...
2007 Chevy Suburban 5.3L with lean conditions from a fuel pressure issue and a vacuum leak, a dirty throttle body causing false TPS code P0121, and a charging system issue. If you are not careful with a job like this, it can end up costing you money.
Symptoms:
Long crank time, low power, backfiring through the intake, stalling, battery light on
:40 symptoms and customer complaint
2:18 what I think the problems are
3:36 code list and freeze frame data
5:05 long crank time
5:30 fuel trim data and O2 analysis
7:14 test drive to look at O2 at WOT
9:17 backfiring though the intake
9:33 forced open loop condition, fixed lean O2, how to test the O2 during this condition (do we have a mixture problem or O2 problem)
11:09 checking fuel pump current with a lab scope #uTestTerminalKit #AESwave
14:30 fuel pressure testing
17:15 addressing idle lean condition and TPS code
20:33 fuel pressure spec
23:35 fixing the TPS code/identifying and cleaning a dirty throttle body
29:14 reviewing the conditions and what we found with my brother
32:20 checking for a vacuum leak
33:05 why communication is the key
34:19 fuel psi dropped 2 psi when fans came on
35:10 idle relearn procedure
37:05 why it ran better in closed loop and after the codes were cleared
ScannerDanner Tools:
www.scannerdan...
www.amazon.com...
For more information on this topic, I have written a “field manual” called Engine Performance Diagnostics which is available at www.scannerdanner.com as an eBook or paper book.
Want even more diagnostic training? Whether you are a DIY trying to fix your own car, someone looking to become an auto technician, or a current auto technician that wants to get more into diagnostics, subscribe to ScannerDanner Premium www.scannerdan... There is a 14 day free trial.
On ScannerDanner Premium I will bring you right into my classroom at Rosedale Technical College. You will find page for page lectures taken right from my book as well as exclusive classroom type case studies. What is so special about these classroom case studies? I pull live problem vehicles directly into my classroom and we troubleshoot them in real time, using and applying the theory and testing procedures we learn during the classroom lectures. There is no better on-line training of how to troubleshoot automotive electrical and electronics systems anywhere!
Disclaimer:
Due to factors beyond the control of ScannerDanner LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ScannerDanner LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ScannerDanner LLC recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ScannerDanner LLC, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ScannerDanner LLC.

Опубликовано:

 

14 янв 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 262   
@johnjyoungjr7400
@johnjyoungjr7400 2 года назад
Just started your premium channel this week and as recommended started with basic electrical concepts and moved to methods of testing (Chapter 1) and already am seeing what you teach coinciding in the work place. Like in Chapter 1 getting as much information from the customer. Also in the same chapter how you cover fuel trim and using a fuse jumper to the scan tool to collect data. Good stuff. I am tired of being a parts changer. I'm gonna be 58 ands it's never too old to learn. I was around for points and condensers and mechanical fuel pumps. Vehicles have come along way since then and continue to get more complex. You are a great teacher! You make learning easy. Electronics have always been my weakness in the field. Wish l would have joined sooner.
@ScannerDanner
@ScannerDanner 2 года назад
Awesome feedback! Thank you so much. Looking forward to hearing from you more.
@nikkoruscio4966
@nikkoruscio4966 Год назад
It seems to be your go-to scanner. I'm in the market for a scope and was going to do the pico since you recommend it but my buisness is all mobile so I'm thinking this would be a better setup. Would you recommend any snap on scanners over this one or would you recommend an entry level pico ? Most videos I see you get by with the 2 channels available on the snap on
@Jpilgrim30
@Jpilgrim30 Год назад
@@nikkoruscio4966 I know this is a few months old but I would go with a pico scope even as a mobile guy. You can get by with the snap on scope but when you want to do something like cam/crank correlation or something that requires looking at detail and making measurements the snap on can be a chore to use when compared to the pico. I would definitely also spring for the four channel for that reason as well. Even with a four channel you’ll sometimes find yourself taking two measurements to do some things like cam/crank correlation on a car with four cam sensors. The pick is so much more convenient to use that it’s worth carrying around the laptop for. If you want it to be ultra portable get a used Dell rugged tablet for cheap and mount the pico scope to the back.
@htownblue11
@htownblue11 2 года назад
Caleb and his edits are getting to become a fantastic aspect of this educational channel. Keeps everyone laughing 😂 while we learn.
@ScannerDanner
@ScannerDanner 2 года назад
I agree, thank you!
@throttlebottle5906
@throttlebottle5906 2 года назад
without some chuckling and knucklehead moments, it gets too boring for many and attention drifts off to daydream land.
@spelunkerd
@spelunkerd 2 года назад
Oh, man, you answered questions as I thought about them, time and again. It is so cool to have a teacher who is on the same frequency. What an interesting observation, to find the pump is working perfectly electrically, then using that as more evidence that the 'pump' is bad. Of course, if all of the regulator, filter, sock, internal tubing and pump are sold as a unit inside the tank, it doesn't matter which component has failed. You just need to prove the pressure is outside parameters and prove that the pump is getting adequate power.
@wyattoneable
@wyattoneable 2 года назад
Good to see you here!
@throttlebottle5906
@throttlebottle5906 2 года назад
starving the pump for fuel would likely cavitate and cause it's RPM's to rise, with current dropping lower. clogged filter would likely cause higher and steady current, seeing their most always pre-regulator. so it's more likely the regulator or other leak within the tank, but it could be a combination of clogged filter/s, failing pump(check waveform on scope), regulator and leak. LOL pretty much pull the tank and change the whole assembly or build a test tank and stand.( yeah nobody will do that)
@notsponsored103
@notsponsored103 2 года назад
"I'm not gonna clean it, I'm gonna make Danner clean it." Proceeds to clean it himself. 🤣
@yeahrightbro7562
@yeahrightbro7562 2 года назад
Caleb adding his awesome touches 🤣😁😂 Excellent job editing !!
@aussiefirestorm
@aussiefirestorm 2 года назад
As soon as you said "make Danner clean it" I knew you would be cleaning the throttle body. Love your work Paul.
@thedogbarber
@thedogbarber 2 года назад
Watching these two very intelligent, wise, friendly brothers work together so well must make the folks so proud.
@ScannerDanner
@ScannerDanner 2 года назад
First 6 minutes of this video my mom shows up at the shop 😉ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NBqkJG500yk.html
@thedogbarber
@thedogbarber 2 года назад
@@ScannerDanner you're a solid dude bub.
@secretsquirrel9722
@secretsquirrel9722 2 года назад
Caleb's editing with the highlighted PID's is on point! Side note : my Mazda6 has a base TPS percentage of 20%. This threw me for a loop and had me going down a rabbit hole myself when I had an issue to diagnose. Until I checked with a Mazda master tech who confirmed that it's normal! P.S. Where's the make up Paul?
@onemechca
@onemechca 2 года назад
As usual.... BRILLIANT diagnosis and explanation.. Please post video of the Mustang that gave you a hard time. Always learn from you.. Thanks.
@ScannerDanner
@ScannerDanner 2 года назад
Oh it's coming! Next week
@josephwash109
@josephwash109 2 года назад
Sometimes people just don't care. The pump probably went first, causing the long crank time. If the battery was already marginal, the extended cranking likely finished off the battery. Then, the alternator was being stressed trying to charge a junk battery. If the customer had the vehicle serviced as soon as a problem was apparent, he could have saved himself some time and money in the long run.
@MrJgonzalez2
@MrJgonzalez2 2 года назад
Great video! Sometimes you gotta start with the obvious first and go from there. Nothing wrong with telling the customer we need a fuel pump and oil cap to begin with.
@weshawkins7165
@weshawkins7165 2 года назад
These multiple problems from owner neglect are the toughest to diag and to explain to owners. Great job diagnosing this one. I want to see the Mustang video.
@wyattoneable
@wyattoneable 2 года назад
So many things to consider but you break it down so we can understand what's going on, thank you.
@MarioDallaRiva
@MarioDallaRiva 2 года назад
Hey Caleb, it wasn't clear to me...did you dad want the fuel pump changed?? 🤣🤣 You Danner boys rock! 👏🏻👏🏻
@rickw.9298
@rickw.9298 2 года назад
I love these mixed bag of nuts troubleshoot videos. So typical of owners who just ignore their car until it quits. In for a penny - in for a pound. Looking forward to the next video.
@davidraezer5937
@davidraezer5937 2 года назад
So typical for a customer to drive the car and for the customer to keep adapting to a vehicle that is suffering from multiple issues. The straw that broke the camels back was the charging/stalling issue. That usually brings in the most oblivious of customers. Even asking customers for details such as how it was running before the issue bringing in the vehicle is met with a blank stare. Engine management has become so adapt to failures. Both good and bad. Too bad our customers don’t have a OBD port!
@isalmankhan1
@isalmankhan1 2 года назад
Awesome, Thanks for sharing SD👍 That throttle plate cleaning process was quick & easy, learned another new technique😍 Special Thanks to James & Caleb Danner👍 Stay Blessed Guy's❤
@fredwalker839
@fredwalker839 Год назад
Paul , I know this is an older video, but one of your better ones ! A little banter with Danner, but you stayed on point, & your dead on right ! 👍👍👍👍
@Dario0707
@Dario0707 2 года назад
Even if I'm not a car mechanic I love to watch your videos.
@SmittySmithsonite
@SmittySmithsonite 2 года назад
Got to love multiple problems! Can't believe the guy was driving with no oil cap! Those engines barely last when everything is right, lol - I would definitely want my oil cap! I laughed hysterically when you were cleaning the TB, knocked something over, then, "BEEEP"- censored, LOL! You sound just like me! Hard not to cuss at something in this line of business, that's for sure. Anyway, hopefully he wants the fuel pump - I want to see that, since I have basically the same truck with a bed out back. So far my pump is still alive at 117k, but the engine is a different story. Fed that thing nothing but the best synthetics since 2k miles, too. Can't win today. I bought a pickup tube o-ring and 2-bolt support brace for it - hopefully that's all it is, but I'm not that hopeful. My guess is the #2 cam bearing, but we'll see. Just sucks it's so much work just to replace this little o-ring. Nice work as usual, fellas!
@kalindambozi2356
@kalindambozi2356 2 года назад
Last week i was able to diagnose fuel pump problems using fuel trim figures. My car could start first time but had driverbility problems. Checked the MAF figures were good no vacuum leaks fuel trim total 36%. Changed pump and was good as new. Yesterday i had a customer complain about long crank time when the car sits for a while. I confirmed that long crank time, checked fuel trim figures were 15% but could drive well. I put a pump and no more long crank time. Thanks for thes videos. I have really learn't alot.
@twistedwrench490
@twistedwrench490 2 года назад
Damn it Paul that’s not how u clean a throttle body!!!!!!😂😂😂😂😂. As usual bro great stuff!
@adamsorensen4966
@adamsorensen4966 2 года назад
I had a similar one but it was the plugged filter on the fuel pump module. After finding they drove in a dusty environment. If you let it sit then most of the crud would fall off and have to run it under heavy load for an hour or so. Then would plug off again and psi would drop to 15 psi. So changed the pump and got back up to the 55-60 psi again. There is a nice fuel pressure and flow tester fromMityvac MV5545 FST PRO. Very handy for loading the pump and verifying flow with pressure.
@rickrogers2649
@rickrogers2649 2 года назад
Another great video. Thanks Paul, Caleb and Danner. You guys are a great team. Cracked up when Caleb did the "fast forward so you don't have to" caption.🤣🤣🤣 I'm an old retired guy but staying in the loop as much as I can from your e-book and videos. Many thanks.
@Paul1958R
@Paul1958R 2 года назад
Clan Danner, Great video - thank you! Cant wait to see the EEC-4 follies. Paul (in MA)
@ppeterson9359
@ppeterson9359 2 года назад
Aww man, I was looking forward to the "after" and finding out if there was a vacuum leak (aside from the oil cap).
@ScannerDanner
@ScannerDanner 2 года назад
Working on it! Hopefully we can make that happen. It all hinges on what else the truck needs to pass pa state inspection
@Ashroyer86
@Ashroyer86 2 года назад
Customer communication been killing it lately.
@Ken-wu6hr
@Ken-wu6hr 2 года назад
It never fails to amaze me what people will put up with. As long as it starts & goes.
@upkarbath
@upkarbath 2 года назад
So this is how brushing the TB ..Great contents
@auto-dieselmed
@auto-dieselmed 2 года назад
Danner, I use penetrant, an old toothbrush, and a shop towel to clean them. No need to take the throttle body off..... in the 90s that was chrysler's way to clean them.
@baukesikma9374
@baukesikma9374 4 месяца назад
Pull over, key off, unplug maf then road test again..if still lean you have a fuel delivery problem, if pre cat sensors go rich wide open throttle you have a maf probem. Just saying. Love you and your bro.
@Garvinranch
@Garvinranch 2 года назад
your brother at the end by his tool box has way more faith than i do when it comes to leaving draws open. that one in the back is terrifying lol.
@robertmedina6875
@robertmedina6875 2 года назад
Some of the public as a whole don’t realize how important maintenance is. I mean that truck is capable of 400,000 miles with proper maintenance.The dirt that got in the engine with no oil cap can cause premature engine failure. Another great video Paul and Caleb!
@ThunderbirdRocket
@ThunderbirdRocket Год назад
Excellent stuff ! Great diagnosis . Thanks for teaching !
@sanctealphonse4510
@sanctealphonse4510 2 года назад
You need to make an episode where after a diag like this, and the problem with the previous car, you walk outside the shop and are attacked by zombies. It would make for a good ending. :-)
@danielnapper1572
@danielnapper1572 5 месяцев назад
thats how me and my brothers debate love the channel very informative
@tonyt1554
@tonyt1554 2 года назад
You actually cleaned the throttle body better than I do. I never want to spray too much cleaner into the intake lol..... I only clean where the idle will be affected.
@brakedd
@brakedd 2 года назад
Those friggin' GM fuel pump check valves. Usually we don't see them last long enough for the check valve to go bad, the hard metal line coming off the sending unit almost always rots away and causes our long crank times
@jdtractorman7445
@jdtractorman7445 2 года назад
245K, wow that's a lot of miles. I wish customers were more up front with all the problems their vehicle is exhibiting. Your brother was right though, once you know a vehicle has a low voltage issue then that has to be addressed before doing anything else (you know that too Paul I'm sure). Low voltage can really mess with electronics on a vehicle. P.S. , tell Caleb nice thumbnail, LOL.
@isalmankhan1
@isalmankhan1 2 года назад
86 Mustang is making me curious, hopefully we will be able to watch it soon😉 But as of now totally focused on this case study😍
@ScannerDanner
@ScannerDanner 2 года назад
Working in the mustang videos now!
@isalmankhan1
@isalmankhan1 2 года назад
@@ScannerDanner Thanks Stay Blessed❤
@brentowen9480
@brentowen9480 2 года назад
test drive after every repair can be the shop's up sell too. Charging issue repaired, test drive, low power-let's look into that...
@brentowen9480
@brentowen9480 2 года назад
Just got a Zues for my shop. Was using an Autel Elite II. Auto config worked better with 'Autel, I think anyway. What I'm saying is I feel your anger when the auto config or ID doesn't happen.
@user-sr8ng4rt5g
@user-sr8ng4rt5g 2 года назад
There is the pressure that the pump produces, and there is the performance of the pump. which needs to be taken into account. one does not depend on the other.
@logicalguy488
@logicalguy488 2 года назад
This is typical in my area, 1 thing goes wrong the customer leaves it and gets used to it, then another thing goes wrong and leaves that too then when a 3rd thing goes wrong the car is horrible to drive then they bring it in. Now you second guessing your diagnosis because you think can all these things go wrong at the same time ?
@jsyine5308
@jsyine5308 2 года назад
One good rule of thumb is unhook the battery before messing with that throttle plate that joker can take a finger off and it also resets the how to learn on its own once battery is hooked back up
@ScannerDanner
@ScannerDanner 2 года назад
Can't unhook the battery to open the throttle with a scanner (best way to do it!) Just keep your fingers out of there
@dougsanders6034
@dougsanders6034 2 года назад
If you had a helper , could they turn the ignition to the on position (not cranked) and depress the accelerator petal all the way. Would this open the throttle? Then clean with a toothbrush. Drive by wire system of course.
@mayowaodus6310
@mayowaodus6310 2 года назад
@@ScannerDanner I think he meant when opening the throttle manually(by hands)
@ScannerDanner
@ScannerDanner 2 года назад
@@dougsanders6034 yes, but some cars you have to put them in gear for the throttle to react to app movement with the engine off
@nickayivor8432
@nickayivor8432 2 года назад
⏰ 19.15pm 15,1,2022 Good Evening Sir ScannerDanner take care and have a great day Sir ScannerDanner Bottle of water 💧 Good for your body Sir ScannerDanner As always tutorial great 👍 👌 ❤ it thank you Sir ScannerDanner 🙏 God bless your family around you Sir ScannerDanner 📷 man got the eyes for 🎥 🎞 very well done .Thank you take care . From Nick Ayivor from London England UK 🇬🇧
@nelsonnarciso1791
@nelsonnarciso1791 2 года назад
Good to see some old fashion basic diagnosis.
@ismailmecano5721
@ismailmecano5721 2 года назад
I think it's not the fuel pump. Because the fuel pump is in spect.also you have to start to put the oil cap first and see . The engine need air escaping from oil cap and that's why you have a long crank start. Also don't forget I injector and vacuum leak or fuel pump filter... Thanks for video
@Jpilgrim30
@Jpilgrim30 Год назад
It’s probably the regulator in this case as the pump waveform looks pretty healthy while the pressure drops off instantly with the key off. Looks like the regulator is stuck wide open. GM is so dumb with their output test control timers and their diagnostics in general. Like when you get a timing code and it totally shuts down everything with the variable valve timing and everything defaults to zeros and is ignored. It basically renders the scan tool useless in checking valve timing issues and you pretty much have to go straight for the scope. With Fords you can look at the VVT error pids and see the timing out or jumping around.
@Jpilgrim30
@Jpilgrim30 2 года назад
I don’t know why snap on scan tools sometimes ask for the year model while other times it self ids. It’s funny because you accidentally hit the wrong year model then it tells you that the year model is incorrect according what it’s reading from the car. Just self ID the car then 😂
@ScannerDanner
@ScannerDanner 2 года назад
Right?
@samcripes3046
@samcripes3046 2 года назад
On these and most GM.14% at 14 or above is when they'll set that code at 12% or less you can and will have stalling problems with the a.c. on hot and warm. I keep good practice to check this as a maintenance. 06 to bla can't remember you will see around 4 to 7 . older they will go closer to 0 mainly on GM cars.
@jameswasher3938
@jameswasher3938 2 года назад
Wow. What a mess that car is... Just like the cars of most people I know! I don't understand why someone wouldn't put a fuel pump in however. Even if they wanted to sell the car, it seems that it would sell for much more if it could be driven. Fun video. You and Danner are great together.
@allennix6580
@allennix6580 2 года назад
I just diagnosed a problem on that truck you're driving...,.. driver side mirror needs to be replaced...... Dam I'm getting good.
@catfish7774
@catfish7774 2 года назад
Normally when the fuel pump fails the fuel pump will get hot and short out that is what I've been taught that the fuel pump will stop working all together also the fuel pump when it's cool down then a vehicle would run okay until it gets warm then it will short out I've been known that it's a common problem and diagnosing a fuel pump and diagnosing powering grounds
@HandyC
@HandyC 2 года назад
My go to fuel pressure limit test is just squeeze the fuel supply hose with some pliers and watch the gauge, if it hardly moves... it's getting a pump.
@sargetester99
@sargetester99 2 года назад
I can't wait for part 2.
@reinoutv4666
@reinoutv4666 2 года назад
Paul, it has caught to my attention, that you are posting al lot more content on your youtube channel then on SD premium. I'm subscribed to SD premium a long time now, but my opinion is that maybe you should post more content on SD premium then on youtube. Besides that, you and Caleb are doing a great job.
@mph5896
@mph5896 2 года назад
He might be trying to pull volume towards SD Premium?
@ScannerDanner
@ScannerDanner 2 года назад
Exactly what @m ph said. This is what we are trying to do. In addition we feel that the foundation is set on SD Premium, with over 500 videos and 400 plus hours of training. People can join, learn there foundations, then take off and fly, while we bring other new people in! Some chose to stay, as a way to say thank you and to support us, as we don't have a RU-vid channel membership or patreon to help, as other creators do. But we have a built in support system with SD Premium! When you support us there, it helps us bring content here! But of course, with SD Premium, we are always working on bringing new content, and we are still doing that! In fact we've started to bring some other content creators in too, to help us. I have a diesel tech and a frontline programmer making some videos for us now for SD Premium! There is more. RU-vid is very specific with their algorithms and getting back to steady uploads has been huge for us as far as how and when YT suggests a video to viewers. It is important to at least do our Saturday noon time releases and not miss any. I do understand that Premium members want the frequency of new videos to at least match what we're doing on RU-vid, but unfortunately, we'd need another editor to make that happen! But we are grooming one right now too, so hopefully soon we can produce more content for both channels. Thanks so much for your support and for the feedback!
@reinoutv4666
@reinoutv4666 2 года назад
@@ScannerDanner Thanks for the clarification Paul, i haven't looked at it that way, and it's making absolutely sense. Over the years i've learned a lot from you, so i'm happy to keep supporting you.
@ScannerDanner
@ScannerDanner 2 года назад
@@reinoutv4666 thank you my friend, I really appreciate it
@gladmarchatlein8164
@gladmarchatlein8164 2 года назад
Hi sir Danner, Why mechanics hestitate to replace O2-sensors,after every 50k milage/without given some problem.* I change them as soon they reach 50k miles...even if they are working fine.* Thanks. Keep the good TEACHING AND PRODUCTION OF GREAT VIDEOS WITH DETAILED ILLUSTRATIONS IN DIAGNOSTICS.* Bessings for you and your family. 👍😎
@ScannerDanner
@ScannerDanner 2 года назад
I won't change them based on mileage but based on activity (frequency and amplitude of the signal)
@TravisDewitz
@TravisDewitz 2 года назад
I would like to see a fuel volume test just to possibly explain the idle trims. I like to check alcohol compensation as well on E85 vehicles.
@joeidaho5938
@joeidaho5938 2 года назад
I"m so damn glad I don't have to deal with these types of highly computerized vehicles. That's where I'm so damn happy to own a 1992 Ford truck...and will keep it for as long as humanly possible. Not hard to figure out problems...and it's rarely expensive for me to fix something.
@grownnotflown2
@grownnotflown2 2 года назад
New o2 sensors seem to create more check engine lights than they solve these days. Has the QC gone done in manufacturing or what!?!
@shawnbauman5463
@shawnbauman5463 2 года назад
You forgot the part where the weekend warrior reuses the TB gasket after cleaning everything for 4 hours.
@ScannerDanner
@ScannerDanner 2 года назад
🤣🤣
@armandonika
@armandonika 2 года назад
I was thinking same thing!
@throttlebottle5906
@throttlebottle5906 2 года назад
since it was popping so easily when leaning out from fuel starvation. I don't recall any of them doing that from only lack of fuel, right to the point of melting down the cats. even way worse than that was. I'm going to say, the spark plugs/secondary ignition is also spanked or junk parts, on top of all the other issues. then again, maybe the cats are melted down clogged too. driving it like that long term is killer bad. 🤪
@ScannerDanner
@ScannerDanner 2 года назад
absolutely the popping was from lack of fuel, not a misfire from a secondary ignition issue. When the spec is 50-60 and under WOT snap in the shop, it drops to 30, Imagine what it actually was on the test drive?!! I bet it dropped to 20
@garyradtke3252
@garyradtke3252 2 года назад
I am in the marine engine repair field and almost every running issue that isn't a new boat warranty issue is a multi problem situation. People don't bring their equipment in until they have to push or tow it in some times because they don't want or have the money to spend and some times because the problems show up gradually and stack up on each other. I have had customers state the boat won't plane off but it idles fine but then we find a 6 cylinder engine is running on 3, shakes and barely runs at idle. Also here in the south I have to be careful of what the customer is saying and what he or she means. If the engine won't start many of the customers say it won't crank so I expect a starter circuit problem but the fact is, it cranks and won't start.
@ScannerDanner
@ScannerDanner 2 года назад
We deal with the same and I can only imagine how difficult a "test drive" may be at times for you! Thanks for sharing.
@sparkyobrian6417
@sparkyobrian6417 2 года назад
Im surprised the customer didnt have the custom ping pong / golf ball oil cap option... And lets be honest, had he bought a Studebaker, he wouldn't be having any of these problems.
@walkingman9171
@walkingman9171 2 года назад
The thing you forgot to show and talk about was the GTO. lol
@Jpilgrim30
@Jpilgrim30 2 года назад
Some of those trucks around that year model won’t relearn the idle without reprogramming the PCM to the latest calibration. It will idle ok until you hit the throttle once and then take off to 3000 RPM and stay there. Neither a relearn or battery reset will fix it if that’s the case. It’s weird because it’s not all of them but I have come across it more than a few times. Even tried using the tech 2 for a relearn with no luck. I guess it’s a software glitch as reprogramming seems to get rid of the issue permanently.
@ScannerDanner
@ScannerDanner 2 года назад
I've been down this road!
@frankelysacostajaquez4274
@frankelysacostajaquez4274 2 года назад
Hello, greetings from the Dominican Republic, Master Danner. I really like your Disgnostics, as how professional you are. I would like to know if your book has already been translated into Spanish. ❤
@ScannerDanner
@ScannerDanner 2 года назад
yes it has, it has just not been published yet
@frankelysacostajaquez4274
@frankelysacostajaquez4274 2 года назад
@@ScannerDanner Ok, thanks Master greetings to all your work team and blessings ❤
@gooe9561
@gooe9561 2 года назад
I've seen misfires at idle caused by a dirty throttle plate area.
@cullenmiller8170
@cullenmiller8170 2 года назад
Thanks for the video and seeing your process.
@MarioDallaRiva
@MarioDallaRiva 2 года назад
(The lovely)Mrs. ScannerDanner: Hey Paul honey, have you seen my pink and white most favourite toothbrush??? 🙀
@oneilwilliams653
@oneilwilliams653 2 года назад
I would love to see the volume on the pump, when it fire intake. Look for part two
@ScannerDanner
@ScannerDanner 2 года назад
I never do volume measurements. Fuel pressure under load is all you need to determine volume. But I'm 100% certain it would fail any volume test you'd do on it
@2secondslater
@2secondslater 2 года назад
I don't do volume measurements but my fuel pressure gauge kit has a fuel flow gauge built in, handy for fuel starvation faults
@alandust2188
@alandust2188 2 года назад
Good one guys....thanks!
@keolusmith6011
@keolusmith6011 2 года назад
Great video, yours always are. I have a different problem. 2013 Tacoma 2.7L, I don't think this is relevant but lightning struck near the vehicle during a storm, truck started the next morning and while driving to town just shut down. No check engine light, cranks but no start, no communication, only with airbag. checked 5volt reference, 2.8 volts at mass air which I thought was not pulling down enough to be a grounded sensor but started disconnecting sensors anyway. of course all disconnected voltage came up to 3 volts but did not return to 5. Is the 2.8 volts at THA wire on maf to high to be a grounded circuit or sensor?
@user-sr8ng4rt5g
@user-sr8ng4rt5g 2 года назад
Check how much the pump pumps in 10 seconds. multiply and find out how much pumps per hour. and check with the manual. it's faster than an oscilloscope.
@Aidan.17
@Aidan.17 2 года назад
Pumps in the tank, regulators in the tank and now Danners in the tank replacing it👍
@paulfiebke3909
@paulfiebke3909 2 года назад
Love seen you and your brother working together, may God bless you all and God bless America 🇺🇸 🙏 ❤️
@ljchrzan
@ljchrzan 2 года назад
I had a Chevy pickup a couple weeks ago, running lean due to a lost oil cap
@spelunkerd
@spelunkerd 2 года назад
I'm just wondering if that "oil cap lean" situation may be a clue there is an internal vacuum leak between crankcase and intake. Under the high vacuum conditions of idle, the PCV should be mostly snapped shut. But here, with a big change in the leak on removing the oil cap, surely you have a big leak of air between the crankcase and the intake? Either a bad PCV valve, or an internal vacuum leak? If you put a vacuum gauge on a tube going to the crankcase, I wonder if you'd see engine vacuum there?
@ScannerDanner
@ScannerDanner 2 года назад
That of course could be possible but what told me it is definitely a fuel pressure issue, even at idle,, is when the cooling fans turned on we had a 2 psi pressure drop 😉
@codo7
@codo7 2 года назад
@@ScannerDanner Too, when driving and putting throttle down, O2s go lean.
@ScannerDanner
@ScannerDanner 2 года назад
@@codo7 exactly
@Phantomas2011
@Phantomas2011 2 года назад
Hi Paul Quick question, I’m not doubting your diagnosis AT ALL!!! Just trying to learn about sign waves now that I have a uscope 😀 If the pump is bad, why does the fuel pump sign wave on your scope looks good? Can’t wait for the 1986 mustang diagnosis!!!
@Joystickoperator
@Joystickoperator 2 года назад
Think because the waves are just checking 12 volt power supply and good ground. The actual signal. not actually the fuel pressure
@ScannerDanner
@ScannerDanner 2 года назад
It has good power and ground was what the amperage told us. And the characteristics of the pump waveform looked good too suggesting that it may actually be a regulator or in take leak issue, but all of this falls under the umbrella of a new pump assembly being needed. We were talking about this at times too. On this design, the regulator, filter and pump are all one assembly and do not get serviced separately. Hope that makes sense. If this had an external regulator, then further testing of that regulator would have been warranted here.
@Phantomas2011
@Phantomas2011 2 года назад
@@ScannerDanner got it 😀
@onyekafrancis3158
@onyekafrancis3158 2 года назад
Good work but do not know when you treated the vacuum leak or fuel pressure leak. Thanks.
@oneilwilliams653
@oneilwilliams653 2 года назад
Good job teacher
@tracydiller9378
@tracydiller9378 2 года назад
Great video guys as always.Getting the all information from some customers can be a real pain.If there is going to be a part 2 can't wait.Have a blessed and safe weekend.
@nunya2814
@nunya2814 2 года назад
As a foxbody owner myself, i feel your frustration lol
@labrat6910
@labrat6910 2 года назад
Thanx again for an awesome video guys
@alexanderstefanxandraswedi5835
@alexanderstefanxandraswedi5835 2 года назад
Good job sharing
@Gary_in_NoVA
@Gary_in_NoVA 2 года назад
After the new fuel pump, smoke check for evap leaks? No? Also, not going underneath to check for powers & grounds . . . shouldn’t Ps & Gs ultimately be checked right at the component to rule out bad connections, line corrosion, etc.?
@ScannerDanner
@ScannerDanner 2 года назад
Amperage pattern of the pump said powers and grounds were good!
@johndillinger8482
@johndillinger8482 2 года назад
i took my yukon into my regular garage to fix a power steering leak and bad miss. they told me they could not find a miss. when i picked the truck up,it was missing badly,but they were closed. when i called to reschedule another appt,they again told me they could not find a miss. im taking it back wed. they gave it a tune up months ago. Are these guys cherry picking my truck,or just dont want to fix what they did.?
@ScannerDanner
@ScannerDanner 2 года назад
Not sure? Frustrating situation for sure!
@patrickhemmen
@patrickhemmen 2 года назад
Great video! Would you recommend an oil change for this because the oil cap was missing? Please wear your seat belt next time ;)
@Portuguese-linguica
@Portuguese-linguica 2 года назад
32:56 Paul & Dan can we get a video on that sweet gto ?
@alanw5879
@alanw5879 2 года назад
What do you generally see with a PWM Fuel Pump waveform with either the pump failing or module failing? I know its a squarewave for a functioning Fuel pump, does the squarewave form change or would you notice it more on an amperage reading?
@ScannerDanner
@ScannerDanner 2 года назад
The square wave you're referring to would be com lines between pump module and PCM. The actual amperage waveform won't be a true on off because the pump produces its own voltage while it is spinning when it is "off". Hope that makes sense.
@alanw5879
@alanw5879 2 года назад
@@ScannerDanner So it would be just straight lines across a scope for instance if the Fuel pump module had or was failing.. It just wouldnt be pwm anymore. But the amperage waveform wouldnt change? Ive just never scoped one of these before. Guess id better do some more reading up on fuel pump modules. I think ive just seem more pumps fail than modules.
@Pablo_Automotive
@Pablo_Automotive 2 года назад
Great againg team Danner thanks for share, you made the weekend more interesting =)
@erichagler7842
@erichagler7842 2 года назад
some times you have to come back down to the real world issues with cars that most of them have multiple issues. i have found this to be true on almost all of them that i see and it is difficult to have to tell the client they have to spend a ton of money to fix it. the other thing is you have to go back to the primary side of the system as a whole ... power is number one with out it all the data can be off .... as this can be seen on this truck fixing the fuel pump is second on the list and still the client doesnt understand why they need all this work done .... welcome to the real world .... lol
@Fairlane55
@Fairlane55 2 года назад
Our Solus Ultra right up to the final supported software update won't auto ID most earlier Chevrolet VIN numbers. No problem GMC auto Vin ID'S They had 25 years to address this but dropped the ball.
@DJ-tn7vj
@DJ-tn7vj 2 года назад
The only thing is missing is the grocery bag from Walmart for this list 🤣
@HouseCallAutoRepair
@HouseCallAutoRepair 2 года назад
If it's not duty cycle controlled, pull the relay and give it power!
@segundoautomotive
@segundoautomotive 2 года назад
Good information!
@EKHondaMotive
@EKHondaMotive 2 года назад
First time watching through, red flag at 10:45. Isn't the crankcase part of the extended intake system (PCV)? Wouldn't the missing cap, in conjunction with a faulty PCV control device, cause the trims to be positive...? -100
@ScannerDanner
@ScannerDanner 2 года назад
yes, they were, watch part 1 when you get a chance. When I covered the missing oil cap hole, the the O2 sensors went rich because there were positive fuel trim numbers from the vacuum leak through the PCV system
@joelshort278
@joelshort278 2 года назад
new camera? looks good
@georgebonney90
@georgebonney90 2 года назад
Thank you mr danner 👍
Далее
Troubleshooting an Intermittent Compression Problem
24:05
Чёрная ДЫРА 🕳️ | WICSUR #shorts
00:49
Просмотров 836 тыс.
An SD Premium lesson on Bias Voltage
36:29
Просмотров 78 тыс.
GDI Misfire "Comeback" What Did We Miss?
46:21
Просмотров 105 тыс.
Ford Coil On Plug Misfire Diagnostics [E-350 V-10]
21:34