Mustang UPR Anti-Roll Bar Pro Series Chrome Moly Kit 1979-2004 Installation

Подписаться 245 тыс.

Просмотров 58 тыс.

50% 1

Bill shows you how to install this UPR Chrome Moly Pro Series Anti-Roll Bar Kit on your 1979-2004 Mustang.
Product Link:
www.cjponyparts.com/upr-anti-r...
When you're serious about drag racing, you're going to want to make sure that you're properly prepping your pony. So, when leaving no room for error is at the forefront of your planning, UPR has you covered. This chrome moly finished anti-roll bar kit is going to do exactly as the name implies, it's going to subtract body roll while stabilizing your 1979-2004 Mustang. This is an intelligent addition when you're going to be drag racing because it will safely keep your car straight and deliver consistent times.
Stay tuned for more great install videos, and remember, CJ Pony Parts is always here to help you reach any finish line you're racing towards. So, if you have any questions or would like to see a specific installation video that would help you out, don't hesitate to post in the comments below!
Check out more Mustang Sway Bar parts from CJ's here:
www.cjponyparts.com/mustang-sw...
Check out more UPR parts from CJ's here:
www.cjponyparts.com/upr/c/8_10...
Subscribe to CJ Pony Parts on RU-vid here:
ru-vid.com_c...

Авто/Мото

Опубликовано:

2 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@larrytemen5114 5 лет назад

Slow down your wire speed and increase your voltage. And when underneath welding, push the puddle and increase wire speed. Aside from that. Perfect install

@BADD400 7 лет назад

Good video thanks Bill.

@richardmaitre9222 6 лет назад

Thanks Bill, you answered a lot of questions since my stang came with the main bar welded in and I have no drop down bars or tabs or hardware, so now I see whats going on, I think I can figure it out now. You rock dude

@cairoyehuda4582 2 года назад

you prolly dont care at all but does any of you know a tool to get back into an Instagram account..? I stupidly forgot the password. I appreciate any tips you can give me!

@devonbriar4627 2 года назад

@Cairo Yehuda instablaster ;)

@cairoyehuda4582 2 года назад

@Devon Briar i really appreciate your reply. I found the site through google and im waiting for the hacking stuff now. Takes a while so I will get back to you later when my account password hopefully is recovered.

@cairoyehuda4582 2 года назад

@Devon Briar It worked and I finally got access to my account again. Im so happy! Thanks so much you saved my ass !

@devonbriar4627 2 года назад

@Cairo Yehuda happy to help :)

@riomekilo895 5 месяцев назад

I thought before you welded the tabs on the diff, the diff was supposed to be at ride height, it looked like the diff is hanging?

@lenwhite9901 7 лет назад

Do you have a video on how to install a c clip eliminator kit?

@donbenson2099 Год назад

PS. A friend of mine 25 years ago had the rear end in his road race car got bent you had to pound the axles in on on side we used weld and shrink to straighten it. When we were done both axles would fall in. The next comment is mine also it is related to this one.

@cristianalvarado684 7 лет назад

Hey man I have a 2005 mustang 4.0.. my o/d sensor keeps flashing once I hit 60 mph but I push the button and the car still responds to it.. can it be just the sensor that is messed up?

@donbenson2099 Год назад

When you weld on the tube it bends the tube. I work in a machine shop we use heat shrinking and WELD to straighten a bent tube of any size and wall thickness. Take a piece of tubing set it in V blocks check it with a dial indicator then weld on it re-indicate it

@justinforristall2550 5 лет назад

MIG welding 4130?

@mikemurphy2193 Год назад

With the bars and the lower links almost in a strait line Ya might as well just put a piece of metal straight from the axle to the frame...

@thanatosxhod6930 7 лет назад

What exhaust is louder the corsa extreme or the borla atak for a 2015 mustang gt?

@halo3ownd 7 лет назад

corsas sound more violent so i think its louder lol

@RobertKohut 7 лет назад

Nice part but it seems the bearings are not serviceable, ever, unless you cut the brackets out essentially ruining the part. Perhaps they will last a very long time?????