My Denture Box dentures are here!! 3D printed dentures! Up and close of my denture 

I make my own dentures at home--full lab like process. my most recent denture I made cost me 25-30 dollars with around 12-14 hours work, they look good.

You look great ! Thank you for sharing your journey with us 😊

They look Great Justin, I hope all is well with you and your family!

Nice!....Looks good, quite natural.

This was a clincher for me. I'm glad how you said that it can be frightening to do this from home. That is how I've felt. I have people, who want to help me, but they only want me to go to a dentist for an evaluation. They, absolutely, do not trust getting dentures from online. But with what I'm going through with the two sets I have, I welcome using Denture Box. I have a gofundme a friend is campaigning for me. That hasn't gone well. I mean, I've had some people donate but it's not near what I would need to get these. Anyway, thanks for sharing how your new dentures are working for you. What really sold me is the way they built up the flanges, they did that partial horseshoe, and how the front is even. But, as you said, they aren't perfect. I am with you. I don't want perfection, either. I just want teeth I can eat with without all the pain of my tongue being pinched or food getting under my lower and my gums being sore. Thanks again.

Really pretty ❤ great improvement

So much better 🎉😊

They look awesome. I love my Dentures from Denture Box .

Awesome Justin such a beautiful set of dentures. I'm getting ready to start my Denture Box Journey

Hi Jason - Your new Denture Box dentures look fantastic and I know you went through a lot to get them. That would be great - not to wear adhesive or Densurefit all the time. That is an expense. I am still getting used to my permanent ones which I have had since April.

They look amazing!

Thank you for your information !

Oh man I only got a small red brush and a normal denture bath! Lol that's the brush I've been looking for too! Haha! I love your new teeth!!! Yay!!

Thank you for sharing,I would like to try it too ,my are very loose right now 😢

another great video. I will be purchasing Denture box for my next set. I am going to get my immediates hard relined for the first time next Month. Depending how that goes will determine when I order Denture Box. I am an appreciative fan of your videos. Love all the information.

Thanks for this video. My eday was 6/6. I didn’t get temps waited just bit to heal and then did wax try ins. Got my teeth on 7/28. But insurance only would cover temps or perms. So I chose perms so could do wax try ins. But next summer I’m wanting to get a 2nd pair. A better pair and I’ve been looking into denture box some and this video really helped. Thank you. They look great.

Ty, Ty, Ty ❤

Woohoo! 😊😊

This was extremely helpful. I dont have insurance, but im extremely lucky to have a woman in town who runs her own dental lab and charges $250 for a top or bottom so $500 for the complete set. Shes absolutely amazing but im not sure how much longer ill have before she retires. I still have 3 front teeth on bottom so i have a partial and will need a full bottom in the future. I also like the color of the gums and the definition of the teeth better and I would also like a 2nd set. I appreciate all the detail you put into your experience. Thank you Justin!!

I'd love to see the video of how or where to grind to make dentures a better fit

You look great!! The gum color matters 😁

I love your videos

Thanks my man for taking us on this journey with you, I kinda cheated and binged watched to play catch up, but pretty good stuff, and thanks for giving us the price, I'm looking at about 12 grand for upper and lower full dentures here in rural western Washington, I have Delta Dental insurance but they only cover pennies on the dollar and that's why it's 12 grand outta pocket if I go this route, but this denture box avenue seems a worthwhile bet, it'll save me lots of money, but I'd need to get the several teeth I have left extracted, my wife said she'd do it for nothing, she seems to eager to trust her 😉, but I heard about easy dentures to have handy for temporaries and they can be done at home, and then get do the denture box adventure, or maybe I'll get a wild hair and head to Mexico, I hear they got some awesome deals, okay, thanks again and God bless 🙏

Hey Justin i just placed my order with denture box on the 15th of march im very happy does you're set from denture box still fit good?? Also can you eat well with them?? They look so good they did a wonderful job on you're set im happy for you tell you're family hello God bless

Thursday is E-day for me I'm nervous stopped smoking today to prepare for it!

They look great! Thank you for sharing, how long from start to finish did it take?

I have been waiting 18 months for my dentist to get me dentures. I have made 12 trips and 12 different molds with them and I STILL DON'T have dentures. I would be pleased to wait for the mail to have something that would not fall out of my mouth each time. If my insurance hadn't already paid and I could have a new pair in less than five years I definitely would do denture box. Just saying 😊

Please keep us all updated at least once a month on how your debturebox is working out for you regarding Fit and eating etc!!

Your teeth look great!! About how long was this process? A month two months?

Those look really good I was wondering about denture box I heard another channel speak of it but I wasn't sure what it was and I feel like this would be a good product what do you think about a partial how would that work with a denture box do you know

Do you miss being able to use a soft reline? My gums are pretty sensitive, and I'm wondering if this is a good choice for that reason. Thank you 😊❤

I was wondering about the design that you had them do for your denture. You brought in the back and it dipped down from both sides does that take away the stability of the upper denture, will it make it more brittle and easy to break, I was wondering what that does to the overall structure of the dentures. I’m fixing to get my permanent and the one issue I have is that their too big and I start to gag if I talk too much. So the way you did it looks very interesting and how I might want to have them do mine

We talked a while back and I’m doing my post op for extractions bone graft and sinus lift, I’ve talked to them about implants but I’m going to at least try denture box did you have to do any sort of liner?

Hi there , 21 days ago got full mouth extractions , some with surgery , gums are still swollen with cero pain , is that normal , how long it will take for swelling to go away. , thanks

Hi Justin, I'm 9 days away from full 12 months of extractions. Last 1 month my top denture was digging into my gums. I was in a lot of pain after work yesterday, after doing a full 8 day stint at work, just got 1 more day However, got home and started adjustments with the dremel. Took the corner off and then deepened the end ridge. Now no more pain. So will probably heal in 2 weeks. I'm off four 4 weeks hols. So will probably get a new digital set, but may travel to Turkey to get it cheaper, such rip of merchants in the uk.

How is the fit on the final dentures and how is your eating with the new dentures like now? What is a soft reline? They look great on you, I think I will do mine with Denture Box!

What is the benefit of these over going to a dentist to have them made? They look really good!!! 😊

Thanks for this video and for the many others that I've watched. As a newbie, it's been super helpful. You are so adept at relating clearly so many great tips. And today, I learned about something new again! Quick question. I'm 6 weeks post extractions. Have immediates with fresh upper/lower soft relines. Good fit again and I'mchewing pretty well. The dentist told me not to use polident fizzy tabs with soft reline material as it causes " blistering" of the material. So I've been using 1 part listerene 1 part water to soak, then brush, then clean water soak for the night. I found a great toothbrush with 1000 bristles that is super soft and cleans my mouth really well with regular toothpaste. I don't think the listerene is the right cleaning approach for these temp dentures with soft relines. Any suggestions? TYIA

I’d love a set of these but can’t afford the 1499 price is there a discount code available right know I have Aspen Dentures I paid just under 800 any thoughts thank you.?

Are these available outside of the US? I am in Canada I too have concerns that my final dentures were done too soon (6 months)and I will have problems down the road.

I have 4 implants on the bottom. Would they be able to make dentures for that?

Thank you sir.

Hello, did you get an alveoplasty done when you got your teeth extracted? Thanks!

Are they thinner than most dentures? Mine seem thick. Also they say the acrylic is different…did you notice anything about it? I’m still deciding. I’ll need a reline soon, but like you I got my perms too soon. So I’m not sure if a reline will fix how big they feel in places.

I have the same problem with my dentures and my bottom do not hold even with a soft reline ! I live my color of my dentures they are bleached white ! Do they have that color as well ! I am glad your very happy ! How much is the whole cost?

Do they do partial dentures?

Hello Sir, do you have sleep apnea and use a cpap? I am considering dentures but worry how it will affect my cpap. Thank you.

This is a off topic question but ive had permanent dentures for about 5 months. The sliva gland problem is horrible im either drownding of dry mouth if anyone has info about this i would appreciate it. Thank you.

I need these can they send to UK

Hey how's it going man? I had two teeth taken out today #29 and 30. Does this company also do partials? It's extremely hard to get seen by a dentist up here because of staff shortages. TIA

Denture box looks way better

Can you please tell me how can i order my denture box please. I want to order a set of booth sides please. Can yo tell me in here or send me a messege how to order it please Sir. Thank yiu for the imfomation yo provid in yiur videos is so welcome to me Sir. 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

I don't have money for dentures now and pain is so bad.

im sure your original denture shade is A2. its what the majority of population is. super common shade. also, with different shade guides, there are different..."codes" for A2. shade guide i use, A2 is P2 for example. glad these worked out for u. i can tell u have a really good ridge of bone on the bottom. u have good bone on top too...but a upper denture usually isnt to tough to get suction on. the lower on the other hand, is a whole different ball game. denture box def. wouldnt work for everyone. im guessing ur original dentures are actually ur...originals? which means u had teeth taken out and then these were ur first dentures. while u heal, ur tissue and bone shrinks for months after surgery which is why u had to keep using soft reline. after so many months, u can go to ur dental office and get a real reline and that should solve the issue this is kind of just for anyone watching and had questions lol appreciated watching this process. congratulations. they do look good

Do you ever need adhesive with your new dentures ?

Are you serious. I have not saw any place that does top and bottom full set. For less $2,000. It seems like most people are happy with Denture Box.

Hi Justin, You do realise 3d printed dentures only cost £2 to produce, that's upper and lower. Such an extortionate amount being charged

I used Denture Box and after months of making impressions over and over, got 4 try ins and still ended up with a set of dentures that are totally unusable. I sent them back, asked for a partial refund, got nothing in return, and now gave nothing to show for it, except I'm $1500 poorer.

They give you fixadent? I dont believe a new denture should need fixadent.. that just put me off!

LMFAO - those have to be the THICKEST dentures I have seen! No way in hell i am buying something as bulky as that. If you get a set of "good" "thin" dentures you will be amazed if you actually like those hunks of junk!

3d printed is significantly worse than milled..