My F100's Engine Hits the DYNO at OVER 7000RPM! How Much Power Will it Make?

Подписаться 212 тыс.

Просмотров 61 тыс.

50% 1

GRAB YOUR RESTOCKED NINEONINE MERCH HERE!
SHOP NOW: www.nineoninespeedcompany.com/
-
Companies involved:
-Holley Performance:
www.holley.com/
-RaceTec:
racetecpistons.com/
-SCAT Crankshafts:
www.scatcrankshafts.com/
-ICE IGNITION:
www.iceignition.com/
-Meziere Enterprices:
www.meziere.com/
-Heatshield Products:
www.heatshieldproducts.com/
March Performance:
marchperformance.com/
-Anderson Motorsports:
marchperformance.com/
-Air Flow Research:
www.airflowresearch.com/
-
FOLLOW ME ON INSTAGRAM!
@thecraig909
@carrnagge
-
SEND ME STUFF! (If you want)
TheCraig909
P.O. Box 362
Ramona, Ca
92065
-
Check out these Classic Uploads!
-Open Headers High School's Reaction!
• Open Headers High Scho...
-Pulling A Rare Jeep From The Weeds!
• Pulling A Rare Jeep Fr...
-My F100 NASCAR Conversion Is FINISHED!
• My F100 NASCAR Convers...
-My F100 SHUTS DOWN AN IMPORT MEET!!! CRAZY FIRE
• My F100 SHUTS DOWN AN ...
-We Found a RARE SVT SUPERCHARGER In The JUNKYARD! Best Junkyard Find Yet!
• We Found a RARE SVT SU...

Авто/Мото

Опубликовано:

24 июн 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 226

@Thecraig909 11 месяцев назад

Grab your RESTOCKED "Small Block Killer" TEE LIVE Now on the website www.nineoninespeedcompany.com/

@jasonmyers3847 11 месяцев назад

I got mine last week. Thanks, man!

@MrAlsbrooks 11 месяцев назад

got a fbo 302 in my truck right now, that's hurtin. can't decide between coyote swap or forced induction pushrod

@ryurc3033 11 месяцев назад

Anyone who has ever experienced anything close to 500 hp in a short bed pickup knows, that's going to be a riot. In a world of 1000-2500 hp RU-vid builds, it's nice to see a build still based in reality. Not a ford guy, but I still appreciate someone who builds a motor and is brave enough to stick it right on a Dyno. This is how you break in a motor that you want to perform. Start, warm it up(vary rpm between 2and 3k). Then put a load on it and give it the beans. My friends dad used to put every ford/Chevy motor he built for a customer in a 1 ton truck to break it in hauling a 3500lb gooseneck trailer. Probably did 20 like that, as soon as it was warmed up, and the cam has time to break in, it was pulling 10,000 lbs down the road as hard as it could. The Camaro that got a small block done that way was frickin scary.

@Thecraig909 11 месяцев назад

I appreciate that!

@JM.Performance 11 месяцев назад

This is actually very impressive. A 91 octane safe timing SBF making 500hp. Why I love my Ford motors… small block or big block

@dillyb0612 11 месяцев назад

This is why I love 302s/ SBF!!!!! Absolute screaming rpm outta that little guy, and 500hp!

@moparjo_9753 10 месяцев назад

Just depends on how much money you put it in the motor

@dennisrobinson8008 9 месяцев назад

@@moparjo_9753The AFR heads made it happen.

@dennisrobinson8008 9 месяцев назад

Its a low rpm for a 5.0 to make 500HP. Very nice.

@1gatomon 11 месяцев назад

That is an accomplishment. I still remember putting my fresh balanced and tuned 421 HO from my 1963 Grand Prix on the Dyno.. I had heard of Power around 450. But when It did 650 I almost passed out. Those where the days of Street Racing.

@bigc6310 11 месяцев назад

Congrats on surpassing 500HP naturally aspirated! Another testament of Ford 302 pushrod power. These are great little engines that have stood the test of time and continue to perform and serve!

@eppyschopshop 11 месяцев назад

Brooooo my heart was racing watching that thing climb to 7k. Good shit. I guess I won't antagonize you on Instagram anymore and start working on my other engine. 302 life 🤘🤘

@stang855 10 месяцев назад

That is pretty gutsy running that at 7300 without any stud girdle. I bet those rockers were dancing all over the place. Nice numbers.

@booncha1971 11 месяцев назад

Awesome ! My anxiety was shooting through the roof watching it climb to 7000 rpm ! That's an Incredible sbf right there !!

@Ray56z 11 месяцев назад

You take care of the bottom end of a Ford and it'll take care of you. I had a 40 over, non-stroked 302 built in the mid 70s. Believing a 8K Motorola tach would be the limit I found out it wasn't, 9300K on another liquid Motorola. It was a big block stomper-those chevy and poncho owners hated me, literally hated me to the point of near fights. Then I dropped in the stroked 351/406.

@dennisrobinson8008 9 месяцев назад

@@Ray56zwhat were your heads and rest of combo?

@Ray56z 9 месяцев назад

@@dennisrobinson8008 Both of those builds were done by a shop in Quincey Illinois, '73-'74. Since my last surgery I've big memory gaps, that sleep juice is a M'F'er. I just tried calling an old friend, think he's asleep. They were a big fan of the 302 Boss clevor style with their own version. They were better known for dirt track power than street/strip but had no problem doing them either. Some of the stuff I never even knew what it was, they had it, told me what it would do, hand over the cash. Tight lipped with info, several builders of circle track engines in that part of the country. I never knew the hp, I never expected those RPMs, but those needed the RPMs for torque. I left the lights at 4200. I actually had another local dirt track builder that built mostly MOPAR do my 340, stroked only, for my '64 Barracuda, he was as tight lipped too. If ol' John-Hollywood-can remember more than this I'll do a complete different reply instead of edit so ya get the nitice.

@dennisrobinson8008 9 месяцев назад

@@Ray56z I appreciate that info.

@dennisrobinson8008 9 месяцев назад

@@Ray56z9300 rpm it had to be making over 600Hp maybe 700 or close to. Clevor style build.

@danw1955 11 месяцев назад

Those numbers are pretty damned impressive for a 302!! Hope it stays together for a while.😄👍

@frankmiranda2429 11 месяцев назад

Sweet kick ass small block. Great job. Love seeing my son hard at work. Ethan is a mad genius.

@johnmyers6827 11 месяцев назад

I can't wait to hear it with your x pipe setup

@2nickles647 4 месяца назад

I've been wrenching on my friend Ford 302. He is pretty happy with my tuning progress. I feel good to help him.

@rdspeedfab 11 месяцев назад

Awesome man!!! Very well done. Very well thought out and planned. Congrats man.

@nealfox1976 11 месяцев назад

Small block sounds mean!!! Great power numbers!!!

@70_Torino_Guy 11 месяцев назад

Dude, that sounds so amazing! Can't wait to hear it in the truck with the x pipe.

@kylesaad5647 11 месяцев назад

Best Gearhead video this year. Made my day!!! Great Job to the crew.....WOW!

@dennisrobinson8008 9 месяцев назад

91 octane holy shit. E85 will give 40 more hp and 25 ft lb. Awesome build.

@bobmanzi7712 11 месяцев назад

great stuff thanks , nice job on the engine.

@heelandtoe_ 11 месяцев назад

Hat’s off for that build!! I had goosebumps when you guys revved it to 7,300, what a sound - and those power figures are insane!

@Thecraig909 11 месяцев назад

Much appreciated Rob!

@pdrphil8159 11 месяцев назад

Oooofta ! 7g's on a stock crank . Not too shabby all around.

@ront2106 11 месяцев назад

Congrat Craig!!!... love it and can't wait to see the F100 on the road.. will I see ya in BOWLING GREEN??? FORDFEST 2023

@jeffpbillings7698 11 месяцев назад

Awesome engine. I wonder what the fox is making. Love the new shirt by the way. How about one for the Galaxie.

@robfoster9791 11 месяцев назад

Heck yeah bro. It's alive! And now I'm ready to hear it with that Y pipe setup

@hanknipper3921 11 месяцев назад

Great job on the motor young man! Keep up the great work.

@marshallwarren9947 11 месяцев назад

Hell yea!! Nice work!! Sounds awesome

@scottburns4515 11 месяцев назад

Man its awesome your combo made that power but what sucks and is awesome at the sametime is its going in yiur truck. I've got almost the twin to your combo and a 74 f100 swb, 2wd so basically the same truck. It will be fun in your truck and I xant wait to see how you like it. But that engine would be a total different animal in your foxbody or a fairlane. Eitherway its going to be awesome to see it in your truck.

@jcnpresser 11 месяцев назад

Them little sbf’s are screamers, gonna be fun in that truck!

@C6Z_Bob 11 месяцев назад

Making peak power all the way up there, you should be shifting that thing close to 8000 rpm for the best acceleration. That thing is gonna sound sick through the X-pipe!

@dsshowerpan 11 месяцев назад

I'm a VW guy, but the sound of a small block Ford past 5,000 rpm sounds so good. Nice job

@sc_308 11 месяцев назад

Good job Mr. Craig!! That thing is a BEAST! 😎🍻

@Stormin06096 11 месяцев назад

Great result from all of your hard work.

@HansenSpeedShop 11 месяцев назад

so awesome great job man sounds sick!

@rustyshackleford1827 11 месяцев назад

That thing sounds wicked! Can’t wait to hear it in the truck.

@kennethbrown5784 11 месяцев назад

Absolutely amazing

@coreyrowe2052 11 месяцев назад

I love it! Sbf ftw! ♥️♥️♥️💪💪💪

@marcusmaddenov2451 11 месяцев назад

Congratulations Craig!

@DanzigDemento 11 месяцев назад

Awesome! Hope this one holds together!

@Heatshieldproducts 11 месяцев назад

nice tie strap work! can't wait to here that thing in person.

@joethepirate1 11 месяцев назад

Well done! It sounds killer!

@calebberglund53 11 месяцев назад

I got so stoked when I saw this post notification. BTW my small block killer shirt came in and it’s SWEET!

@Redrocker1970 11 месяцев назад

Sounds great! Excellent!

@marksearcy9708 11 месяцев назад

I know you are over the moon proud. You built it yourself and the your plan came together and you reached your goal!😁😎👍

@trailerparkcryptoking5213 11 месяцев назад

Sounds great! Back in 1980 I had a 289 in a ‘62 Ranchero that I shifted at 7200 RPM. It ran 11.80’s. Never dyno’d but back then there was no aftermarket for SBF’s as the 5.0 wasn’t born yet. Old factory heads, rods, distributor, etc. with good heads/cam and more RPM I suspect it would run 10’s in today’s world....

@gilfernandez9122 11 месяцев назад

Awesome job Craig 👍

@red_fox_flareside 11 месяцев назад

SBF baby. Love it

@brianodom9411 11 месяцев назад

I've been waiting for this.

@DoesItTho 11 месяцев назад

Impressive. Those are definitely some numbers to tout. Kudos to 909 Speed, homework done and test aced.

@garybrady9531 11 месяцев назад

Never thought it'd make your mark,congratulations

@alanbustamante21 11 месяцев назад

LETTTTSSSS GOOOOOO CRAAAAAIG🔥🔥🔥🔥

@awfulcoffelsonecargarage8215 11 месяцев назад

My old 1969 F1 hundred has a 302 mine was stock but it was a lot of fun to drive three on the tree shifter but what do you think of them quick fuel carburetors I run a quick fuel race Q750 and I have a 750 black diamond that I just bought ran the race Q on a little stroker motor I built all I had to do was set the idle screw a little bit but pretty much straight out of the box I was curious to see if he did anything to that Carburetor or did you just bolt it on and use it with factory settings sounds like now all you need to do is put some weight In the back of that truck have fun with your Truck later bye

@jimmymccormick142 11 месяцев назад

Great video Ford power forever baby keep on pulling the knot out of them boties and the horns off them mopars

@kelvinboyd7459 11 месяцев назад

Awesome dude I really wanted to see that torque number also

@deanparks7003 11 месяцев назад

GREAT job Craig.....

@curtisfawver8655 11 месяцев назад

Awesome job!

@haroldgetchelljr.4031 11 месяцев назад

Love it man….Love my Fords

@merc6 11 месяцев назад

I'd love to get my 289 in my 65 fairlane running like this. Pipe dreams for now.

@dennisrobinson8008 9 месяцев назад

How is this one doing today? Before your build for high rpm builds we'd seek 69-71 blocks or boss 302 blocks with thicker mains and thicker castings or an aftermarket block. The "thinwall casting" 79-94 "5.0" mustang block was not really desireable for that, we'd think you'd harmonics would crack the mains and they would crack or down the lifter valley which you know is super thin. Knowing we can get into a high rpm build at a lower cost point is attractive. Did you stay with that 270@.050" cam that you mentioned early in the series because later on I heard something about an Anderson cam or did i hear wrong?

@timezone4907 10 месяцев назад

You got to put together the build sheet and sell it to us SBF guys can have a screamer like that. Awesome job keep it going.

@OurCabinInThewoods 11 месяцев назад

Heck yeah can't wait to hear heading down the road hitting 7k Woohoo yes.

@maxfalkner8849 11 месяцев назад

I would absolutely love to see a tunnel ram sticking out of that old fords hood! probably not what your going for but, I could always hope!

@dennisrobinson8008 9 месяцев назад

Tunnel ram for the extra 30 to 50hp and balanced fuel distribution.

@travisevans7502 11 месяцев назад

Sounds nasty👍

@kevinb158 11 месяцев назад

Well it's going to be a handful in that truck

@trevordevins1042 11 месяцев назад

Congratulations

@timothybrian3018 11 месяцев назад

How about jetting and power valve size? Awesome build!

@dennisrobinson8008 9 месяцев назад

Sweet! It made all that power at a "low" 7200 rpm. I was curious how she is doing today? We were just talking about we don't see stock blocks much over 6500, that if you do it's usually a 69-71 that has the higher nickel content and stronger mains and thicker bores.

@goldysgarage189 11 месяцев назад

Impressive. What size carb was used on the dyno? 750dp?

@sykwookiee 11 месяцев назад

Wazzup my brother? glad to hang out...

@agoodballet 11 месяцев назад

You can still buy the high zink VR1 at autozone that’s what I use in my turbo Honda.

@davidcatlette9697 11 месяцев назад

And NAPA bought 60w for my Harley

@mikeprovost7900 11 месяцев назад

Funny enough, I work at an O’Reilly, granted in North Carolina, but I keep sae 30, 10-30, and 20-50 vr1 in stock and my warehouse keeps the Lucas hot rod high zinc in everything from 10-30 to 20-50

@JarvisMod 11 месяцев назад

Well done

@Ricks408 11 месяцев назад

Oh yeah it sounded awesome!

@kalebholt 11 месяцев назад

Awesome video! If I could like it twice, I would.

@danielfrye7651 11 месяцев назад

In the future if you go 351 you get a cleaveland with the 4v heads just a suggestion to do something different if you’re wanna know more about the cleaveland check Richard holdners the other small block ford 351 cleaveland series. Either way that’s one nasty moon reving 302 can’t wait to see the truck get down.

@carado1984 11 месяцев назад

Sentences are hard. Cleveland.

@caspermoberg5172 11 месяцев назад

that is going to be a riot!!!

@lukezane143 10 месяцев назад

What camshaft grind does it have and what heads are you running.

@jessegoldston70 11 месяцев назад

Yes indeed Awesome, now need to finish the Galaxy and the CrewCab

@billhendon1017 11 месяцев назад

Awesome!!

@chadkalina1257 11 месяцев назад

Engine sounds amazing you deserve that win can't wait to see it screaming in the f100

@mitchellschultz8958 11 месяцев назад

Yeah buddy!! 507 on pump gas, that awesome. Now you just need a tire sponsor haha.

@caseyrakes6184 11 месяцев назад

What spring pressure and lifters? Short travel or???

@Fahrenheit_Motorsports 11 месяцев назад

This was nuts! I was holding my breath on that last run 😅

@Fahrenheit_Motorsports 11 месяцев назад

Also this engine is going to sound ridiculous on the old exhaust setup. Best sounding truck I’ve ever heard. Can’t wait for it to come back together.

@sumthinsumthingarage7913 11 месяцев назад

Those Gold Moroso valve covers look awesome Brother. Congrats on the new engine and may it live long.

@christophertoscano2026 11 месяцев назад

Awesome

@mikes1437 11 месяцев назад

What size afr our the beads and compression

@superczech69 11 месяцев назад

Just think what she would do on E85. Great build bud!

@RalphSampson... 11 месяцев назад

E85? Why?

@superczech69 11 месяцев назад

@@RalphSampson... do your homework

@dennisrobinson8008 9 месяцев назад

@@RalphSampson...more power and zero detonation.

@JimBascombe 5 месяцев назад

Funny that he said a cold start in Wisconsin. As i have done plenty of cold starts in Wisconsin. Lol

@wooteddy28 11 месяцев назад

I was wondering how much could I get out my mercy mountaineer engine when I start the build

@justinfahnestock5067 11 месяцев назад

Very impressive.

@darriandk 11 месяцев назад

What was the compression

@travingreenhalgh3518 11 месяцев назад

Wow that’s a peppy!

@JeanMorisset-ii7hs 11 месяцев назад

Congratulations.

@jdrods1519 11 месяцев назад

Awesome!!!! 🇺🇸💪🏼💪🏼

@leonardovera4873 11 месяцев назад

Let's goooooo!!

@FourSpeedFilms 11 месяцев назад

awesome

@tabletop45 11 месяцев назад

i thought stock 302 blocks couldn't handle more than 500 HP. dont they always split between the crank and main at that power level?

@ezyogibear9677 11 месяцев назад

My grandpa has a 62 F100 with a 292 Yblock that i would love to get like 400 or 500 horsepower out of. a truck like that would be amazing and i know how big the smile on his face would be if he was able to drive it