My Hunting Set-Up 

@@davidblagg2576 I have not, i would love to use lighted nocks just not happy with the quality. I have used nock turnals and lumenocks.

Won't hurt anything. Those specs are just an average. You're all good to shoot

@@InsideOutPrecision ok thank you...

Ask and you shall receive! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kryfurp6l10.html

Inside Out Precision lol clever, you’re almost an archery genie! An archerinie? Now when you say “ask and you shall receive.” It’s going to echo lol thanks for the link!

Yeah I have a TRX 36 on the way. Mathews is coming out with a bow called VXR. Gonna be offered in a 31.5 and 28 version. Basically a slightly longer and shorter version of the Vertix with a caged sight window to lighten it up a little bit.

@@InsideOutPrecision I have shot the TRX 36. Felt faster than standard target bows. Very nice! Yeah that TRX 7 is a beast! She's the one I installed the Hamskea Target Pro rest on. My plan is bright orange strings/cables - a Harley-Davidson version! 😎

@@theHammr88 nice! Yeah the 7 and 8 are a lot of bow, but they pound.

If you run a 4 fletch there will be plenty of drag

@@InsideOutPrecision thanks! I'll give them a go then.

I also went back to feathers. A 3" helical feather steers just as well as a 2" blazer.It doesn't make any more noise than the blazer and 3 feathers are about 12 grains lighter than 3 blazers.

@@daverushia6569 Do you guys hunt at all or just target shoot. I love feathers but I tried hunting in the rain with them back in the early '80s. I shot at a doe about 25 yds away and my arrow buried in the ground 5' in front of her. Wet feathers don't fly.

@@russelllangworthy8855 that's weird, I know feathers obviously are not going to work as well when the are wet but its usually not as bad as you described. Like I said , I have shot them wet and the worked pretty decent.That being said, my particular arrow build at the time could put a bare shaft and a fletched within 2" of each other at 25 yards. The perfect tune and high FOC sent them down range like small spears.

Yeah. Add some rainbow 🌈 vanes too & join the next pride parade. smh upside-down quiver my a**!

Yeah, it helps lower the center of gravity without having to add more lower c.g. weight. Why add more weight when an adjustment on the quiver may be all you need. Also, the quiver with the tips down low and fletchings and nocks up top helps to keep your tail-feathers out of the dirt and brush. Many folks who have flipped their quivers like the end results, better weight and balance without unnecessarily adding weight to the bow.

@Boxing 101 the queer-valizer? Yeah, nah.

@Boxing 101 Just joking! Geez

@Boxing 101 You know, I've disagreed with some of your opinions in the past, but this time, I totally agree with you. That guy, StraightNarrow is a tool with a capital D.

I'm not what you mean "step my game up" . I shoot a 33" bar on my target bow. Does that meet your "game" requirements haha?

Two completely different cams

@@InsideOutPrecision so the mod on cam is different or the cam is a different shape I never shot a Matthew's bow before if you were drawing a 70lb rx4 alpha compared to a 70lb vxr 28 or 31.5 which bow is it more work to draw sorry for bugging you I see different vids online an I feel like your info is more genuine or experienced an I appreciate u take time to answer my questions you should start charging for responses did you see the ultraview has the hinge in a large now? Anyway thanks again.🤙🤙🤙

Yeah just the easton X noxk

You got it Kid D! Happy to hear they're helping

No the loop can't catch. If you look at any tournament archers release, they are all hooks. It's actually a cleaner release than calipers. If you're missing left it's not from the hook!

@@InsideOutPrecision thank you.

Yeah it's a shame. Broadheads seem to be the worst. A guy has a great idea and makes an awesome head, but then a big company buys him out and sends the production to China!

Inside Out Precision and why is that? As someone whom has tried to produce things for commercial markets the margins are so tight on most stuff no guy can afford to do it himself and make a dime. Other problem is the Wal Mart, harbor freight, etc. mentality, if people gave two shits about quality etc Wal Mart would be gone, as would knock offs and the whole garbage market. But most just wanna look the part and so the black markets and cheap crap flourishes and the other stuff is priced out of many’s reach, until rather than lose it all they sell, and the big corporations care little about anything but sales and so most go the cheapest production route possible. This is not every company nor private manufactures but many fall into these pitfalls. Takes plenty of time effort and money to make something and then roll it out to the public at a consistent quality and at a price point in which both the consumer and producer can feel good and move forward. One other point, producers produce what the maker wants at a certain price point. China gets categorized as a producer of junk, that’s because the want for money proceeds most companies care for quality, they realized if the stuff didn’t last we would stupidly just go back and buy more and we do, and so they just keep rolling out more to fit the need. I mean the new Hoyt bow is going for about $1800.00 bare bow, what would that price be if it were made supposedly made here? Whom would Hoyt sell to at that price? Most stuff supposedly made here is merely put together here with parts made elsewhere. Being great comes from hard work, ethics, humbleness, perseverance, not fearing the truth, and doing what is correct. It does not nor will it ever come from puffing up your chest, treating others like crap, being a loud mouth braggart, not lending a helping hand where needed nor following lies to make yourself look or feel good, that’s the fucking opposite, and always will be no matter what a liar attempts to sell it as. I hope everyone has a great season and stays safe.

It would looks good. But that's not buckskin....

QAD Exodus

Thanks! We're in Springfield OR

5 arrow

Get a hamskea trinity. You will not regret

@@justjabki2079 I did! Hamskea Trinity rest on all my bows now

Nope. If I was going to buy one though it would either be Hoyt RX3 or the new PSE Mach 1

The PSE is smoother and quieter than the Hoyts

I haven't tried PSE!!! I do have RX3!!!!

I shoot the QAD Exodus 125

Hate it. If there's any wind at all it acts like a sail on the front of your bow. A long stabilizer in general catches a lot of wind, then add a fan of 6 arrows below it and you can't hold the pin still to save your life

Inside Out Precision Haha! Makes sense, appreciate the feedback. I really appreciate all the effort that is put into all the videos you put out! Your videos really help a lot.

QAD Exodus 125s

I'm using the matthews 6 arrow removable. It's great quality and ease to remove but a bit heavy.

Chrono says 284

Thanks, I dropped from 505grains to 482 grains, 30.6/8 draw, 68 lb vertix at 281 fbs,so I'm about where I should be . I have some of those old shoulders you talk about.

That's all RU-vid! The more views the more ads 🙄

You can so skip them after 5 seconds though

Looks like it might be Under Armour Barren.

No 400s would be way too light. I think 340s are right where you need to be!

@@InsideOutPrecision thanks for the response and feedback. I am a fan btw. Keep up the good work!