My New Stunt Moped Build Is Insane! 

Go buy a set of black zip ties you will appreciate the final product and finish plus it compliments your painted covers

check your exhaust manifold it is probably 25mm you can go to 28mm it helps for higher top speed Good Luck!

FUCK YEAH FINALLY MAXI CONTENT! Dude keep the maxi videos coming.

great welds for the it being your first time

Were back boys

The welder, use more heat and slow down the wire feed a little. Yopu need more penatration in the welds. The weld should look more dished than the raised bead. Get a Magnesium plate (Sparks) for the wheelie dragging. You want more RPM then increase rear sprocket size.

Dude that clutch problem would drive me crazy!!!!!!! AHHHHHHHH

Yo bro a year ago I hated these old mopeds and begged my dad to buy me a scooter then I found you and saw your Puch Maxi videos and I fell in love with these mopeds and you inspired me to get one and I finally found the one its a Tomos a35 yr 2000 and im going to get it on Monday. Thanks for uploading these moped videos

well if you want more power a inner rotor ignition would help alot, trust me im danish. not that there is not more then that you could do, but its a good starting point (other ting you should/could adjust are: the Needell and jets, the ports in the cylinder, get the right squish, flow optimizing the block, stuff like that you know😁)

the rack looks really good for it being your first weldings

Love the rebuild. But time for a bigger pipe for better top end. May want to look at a side bleed to prevent the baffle from scraping when you wheelie

You need the kickstart clutch springs, and possibly a better exhaust. Also jetting can hold you back.

Great video. Love my Tomos!

For never welding that practice weld was beautiful

Doing great!! 👍 Taking it there.

you know ia good day when J uploads a video

Dream stunt moped what an amazing build

You go for it young blood we all started somewhere you are doing bloody well enjoy the next project I am sure there will be many from UK

looking sweet bro, and sounds awesome. be safe, but have FUN.

Damn that bike sounds good! My old finnish puch engined moped could never 😂

Vid was fire 🔥The rack looks sick! The maxi is looking sooo fresh 👌🏻🙌🏻💯

Puch Maxi all over the World . Nice build .

Fire video🔥much love from switzerland

a suggestion to the power problem, based on my own experience, would be the gaskets leaving the piston too far from the cylinder head at TDC, sometimes the gaskets they send you are ironically too fat, the exhaust you have could also create a weird powerloss, due to it being a large exhaust on a bike with a crank and port setup for low-mid range power, definitely check for air leaks at the reed valve, the gaskets there are annoyingly often not good for the puch tuning parts, the channel "Puch Praxis" is german but has extremely many videos (with English subtitles) that are super valuable to anyone who wants a maxi 1 or 2 speed that can rock 50mph reliably. personally I've had a few maxis and other old mopeds, the best results I've seen on a maxi was 65cc polini mixed with a swiing cigar exhaust, 15mm carburetor and some offbrand electronic ignition, ran 45mph on a dyno with 6.5hp

double check your timing and spray down for air leaks. 16x44 with a treats reed, proma and powerdynamo should be HITTING hard at like 4k. Sounds a little lean to me. What temps are you hitting?

Your channel is a banger. I built myself a motorized bicycle because of you. Thanks bro ❤

where i'm from (Denmark), my buddies and i started riding these bikes at 14 not specifically puch but mopeds in general, they are very fun on group rides and small road trips. One of my buddies had kinda the same problem with the rpm, his bike didnt get enough fuel

Today is a good thay finnaly 2 stroke jay video!!!! Now we need the rmz 125 :D

welds look good actually, nothing to worry about

Watching for 30 minutes is worth ❤❤

Hey when your spray painting spray off the side of object then walk the sprayer to the object your working on and keep walking it until your off the object and then stop spraying. This will help you get less dripping and runs. Also those welds are realy good just keep practicing you will get very good at it also whatch videos on welding it will help.

you need a hpi or pvl ignition tuned to 1.6 mm bofore tdc

Yeah puch maxi vids 🎉 greets from austria 🇦🇹 bout to get myself a maxi soon 😂🤘🏼

love the build and mostle the helmet never seen anything like it .

Broo that moped is fire 🔥 keep up with the good work ❤

Great job, your content inspired me to buy a moped and modify it,

W build my guy look insane!

2 Things: a sandblast cabinet from HF will pay for itself in a few projects. Secondly they sell naked crimp connects, which along with some glue filled marine heat shrink, is the best of all worlds. It's what they gave us for factory harness repairs as a Ford dealer mechanic.

i was just rewatching your old moped vids today! Was hyped asf when I saw the post noti 😂

Great Video, keep it up!

Love it when you post

Amazing video🔥🔥🔥

yo man fan from the netherlands here, as a clutch setup here we use ktm clutches from the 50cc ktm's hope this helps

keep it up bro you are the best

Ayee finally a new vid🔥🔥🔥🔥 Lowkey thought u was dead

I love this build. Very cool. I wonder if you can get your hands on a Simson S51 over there. Thats the number one old school moped here in Germany. Lots of tuning and huge aftermarket here.

Good stuff Jay🎉🎉 glad to see you’re posting

Fab a mount for the TrailTech. Zipties are cheesy.

Lets goo dude! Sick video. I stil think the exhaust would be a great upgrade also 19mm carb it could be bigger but then also might run hotter quicker

Only thing I would have done differently is use black zip ties and i definitely would have ridden it longer than anyone lol awesome video and awesome bike thanks for sharing 😊

Check the timing. Might just be the spark occuring at the wrong time? Might aswell be a carb issue. If you run it WOT you should see the temp rising if timing/jetting is wrong. Good work with the moped so far and good luck sorting out the RPM limiting problem

look forward to these uploads :)

Bro I actually love your videos ❤❤❤ I Fukin love it❤❤❤

finaly another nice video. keep it up

yessir 30 minutes of moped content

I myself have a puch maxi, all original and it hits about 30mph. and you have a 70cc, yours can go much faster if you tune it right 👍i think you can make it!

good music choice in the video

nise man I Just Built My TTR 110 With a BBR 130 Bore Kit and i love it Nise Moped

i love this content please do more!!!!!

It seems you have a Proma CC 25mm exhaust. E50 70cc kit engines tend to run better on 28mm pipes. I would suggest trying a Homoet p6, or a Technigas Next. These exhausts pull a little slower, but tend to have higher RPM's. Might want to play with your gearing aswell. Hope this info helps you! Love your vids on the Maxi.

Legend is back🎉

What you need is a KTM SX50 clutch set adapted for puch. Or a 3 claw atleast. The stock (even the ''upgraded'' ones are garbage) Like the look of the puch, that classic brown color is perfect! Greetings from The Netherlands. 😎

hey man, you got the proma cc exhaust on this bike, its a good exhaust for 50-65cc but not for your 70cc kit. The proma exhaust is only good for mid rpm power but not for high, and your cylinder is more for high rpm made. put a homoet p6 exhaust or something like this on it.

Ne 2stroke jay vid 🔥🔥🔥🔥 i legit got my first bike from the last vid to now

build looking great broo! welcome to the wheeliebar-club XD

That exhaust limits it alot

Hey man, I am restoring an old Yamaha ag100, all electricals on it is shot and its hard to find original parts, plus they are expensive. A video on how to do custom wiring harness would be good😅

Think it needs a bigger carb. When i have been tuning mopeds a 19mm was what i hade on 50cc sport cylinders

Your vids makes me really consider getting a Puch Maxi to build. Thank you for the chill & nice content!

Hell Yes BRO!!!!!

Go to switzerland there are a lot of moped riders there. I'm a moped rider myself and I love your Puch. Please answer me when you come to Switzerland. I would like to meet you.

hi, i recently rebuilt my own puch maxi S and i had basically the same problem its prolly not the clutch but the ignition you definetly need to check that using like a flash gun(idk what the name is in english im from austria), could also be wrong main jet so just check the spark plug, there are many things you need to adjust in the ignition for it to work properly just ask if you ned or watch a tutorial. Love the series btw!

i wish i had a moped like that

I think you need to choose a leaner main jet. If the Spark plug is already dark Brown, then try to set your egnitiona bit later. If anyone has any other tips, please comment. :) following you since 2 years, love your content

Sick bro

hey im from switzerland and mopeds are really big here i got my self a puch maxi with a 75ccm italkit maybe try using other clutch springs i would try the blue one with 15% harder then origianl i dont know if u got the same color but just look for 15%.

it could be the exhaust size or/and ignition like the stator CDI or coil it can be a problem

Love you video brother

Cool video

Let’s go your a legend

Just as a advice, buy a 3 jaw clutch (HK or DMP), then a better exhaust with a 28mm manifold (personally I rate some homoet p6, a cigar exhaust or a MLM) for your setup. Good luck and best regards from Switzerland✌🏻

don't know how i missed this banger, but they say: better late than never right?!😂

Nice, alltho I would concider a geared puch maxi engine.

28:19 read plugs and see what your mixtures are like, you probably need a larger main jet (maybe even by 3 sizes)

The algorithm still loves you man😂🔥

Fire video

the pipe is definitely holding you back and id go to 16x40 gearing

Great Vid, you should think about a fork brace

Great video J. I just had an idea, you can mount an titanium plate or some of those flint skateboard things so that when you scrape in makes a sh!t ton of sparks. Oh and btw your boy finally got a scooter. It's an old beaten up yamaha, but it has a license and it uses the legendary minarelli horizontal. Sick build. Have a great night/day

i got the same problem with my clutch been at it for like 2 months hahaha

pls buy more puch or maybe ciaos and tune them to the max keep it up!

Have you mached ports? And I think it is running too lean but might be your mic but check that. Is your ingition timing correct? I might test different sprokets too. Good luck with that bike.

Change the pin on the carb, put it 1 lower and look what it gives, its like it doesn´t get enough fuel at high rpm

In damnark we love mopedes

I would try adjusting the carb.

Hi two stroke J I'm a 2 stroke freak and I admire your work ... Could you please give us an update on the Honda Dio next and also tell us what you think of the Yamaha Neos 2t ?

try diferend exhausts this one seems to limiting the rpm's probably due to the narrow tailpipe. and please shorten your cables to the right length, that looks so much better

basicly if u but in new silinder kit you need to ride very calmly for about 250 km or 150 miles and not give it any of full gas keep it very calm and slow and then after the 250km you can rev it high i think thats why its not running goog but yes :D

fire!

holy **** a good video, I dont understand how you these fire video. Just continue with what you doing, because its fucking awesome.