My Sulfur Geyser Tamer - Explained

Подписаться 24 тыс.

Просмотров 25 тыс.

50% 1

The set and forget sulfur geyser tamer.
To see how to build this check out the Sulfur Geyser Tamer short-style video: • Sulfur Geyser Tamer - ...
And remember to set the liquid valve manually with a duplicant to 1000g!
Patreon: / lumaplays
Save file: As shown: cdn.discordapp.com/attachment...
ALL Versions: cdn.discordapp.com/attachment...
Blueprint: cdn.discordapp.com/attachment...
Chapters:
0:00 Intro
0:06 What is this design for?
0:19 Why so complicated?
0:43 Alternative Method & why this design
0:55 Informations
1:02 Heat Transfer
1:41 Why A pump and a autosweeper
2:18 Sulfur solidifiying
2:48 Conveyor loop
3:13 Cooling loop
3:42 Automation
3:59 Sensors
4:23 Liquids
4:58 Liquids & Cooling the pump and autosweeper
5:24 Overlays (check the short)
5:28 Use case
5:35 "Failed" Attempts
5:52 Outro
It would be nice if you leave a like :)
#sulfurgeysertamer #sulfurgeyser #lumaplays
#tutorial #explanation #oxygennotincluded

Игры

Опубликовано:

4 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@Luma_plays 2 года назад

How to build this? -> Here is the short style video :) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qlEq0dff9uU.html

@Sandwich_Official Год назад

Awesome build! Thanks for all your geyser and vent setups.

@ashenlion805 2 года назад

Nice. Sulfurs heat range and shc makes it kind of a pain to get right. How I solved mine was to let the geyser drop into a pool of cooled nuclear waste. The nuke pool is temperature controlled by a turbine/aquatunner setup. The sulfur doesn't need to be cooled down that much but you can get it pretty low as the shc difference is really high the sulfur drops in temp almost instantly. Once down to target temp the AT doesn't run much at all.

@Luma_plays 2 года назад

Nuclear waste is a great coolant Also good solution :). Another viewer suggested a version that is self powered amd self cooled but leaves the sulfur at 95°C. That one is in testing atm.

@wittkopdotzgaming 2 года назад

Knowing that my 2nd planet has one of those, and eventually i will need a source of sulfur, thanks in advantage, Luma!

@richards8089 Год назад

Wow thanks I just found my first sulfur geyser so I'm definitely going to try and build this its awesome

@Luma_plays Год назад

Glad you like it. Hope it works well for you.

@osconnise Год назад

Was a bit of a pain to build on the flipped asteroid but works so well!! Thank you!

@Luma_plays Год назад

I agree, i feel the same. hard to build but i like the setup.

@hrm1734 2 года назад

正在准备开采液硫泉，这个不错！赞

@richard2mitchell 2 года назад

DUDE this is good youtubing! (i dont know if that is a word but it is now) short to the point and no bull shit...very good...the only thing is i would like to see ALOT more stuff about everything...like a good plastic farm for deckos

@Luma_plays 2 года назад

Thanks for the compliment. I always try to make them as short as possible. Sometimes it can be difficult because there are people of different level watching. And I can't explain an aquatuner setup everytime.

@richard2mitchell 2 года назад

@@Luma_plays HAHAHA i have looked up aquatuner set up no joke about 15 and i STILL cant do it without looking it up. i would like to have a playlist of short videos like that would be so much easier lol

@Luma_plays 2 года назад

@@richard2mitchell I do have a playlist of short videos like that. check it out

@richard2mitchell 2 года назад

@@Luma_plays yeah I found it right after I posted that comment lol

@nico-ob6wj 2 года назад

So i did built something similar without aquatunner but I'm pumping 1kg of sulfur trough the steam room and then in a counter flow with the turbine output water to exchange temp... I'm currently waiting for the geyser to rerupt with much anticipation to test, but thanks to your design I will know what to change if it doesn't work! Thanks

@Luma_plays 2 года назад

Sounds like a good and solid design. If you want to share that consider swooping by to the discord :)

@wittkopdotzgaming 2 года назад

I understand that you need some conductive liquid for turbine, auto sweeper, and others in order to cool them better, but can ethanol be used instead? Also what metal best for radiant pipes?

@Luma_plays 2 года назад

For this build any radiant pipes should be fine. The cooling power is good enough. The liquid depends on where in the build you use it. Anything that does not freeze at your desired temperatures in the cooling areas. Anything that doesn't flash to gas in the hot areas. So ethanol for cooling yes, but it has a !terrible! thermal conductivity. For the hot areas NOT ethanol.

@wittkopdotzgaming 2 года назад

Thanks!

@gcdani271 2 года назад

You could make smaller the heat Exchanger by using aluminium

@Luma_plays 2 года назад

@@gcdani271 Yeah definitely :). And you can easily make it bigger and use worse material. How small do you think we can get it while still keeping it rectangular?

@gcdani271 2 года назад

@@Luma_plays pretty much as high as the steam turbine making chekerboard pattern

@destwong Год назад

Hmm a bit too complicated how about let it drip down to a pool of cold water in vacuum. Then transfer it out

@Luma_plays Год назад

That is also a totally fine solution. you could as well just pool up the sulfur and cool it then. Both of these methods are not as power efficient as this setup though. Not that it is a large power saving but i like making small efficient build. Most of the times that means they are not as simple as they could be.

@bahrisean9116 2 года назад

when will the next series comes out?

@Luma_plays 2 года назад

Which Series do you refer to? Shorts, Tutorials, Mod Showcase, Builds explained, Let's play or other game series than ONI?

@techrama9642 2 года назад

@@Luma_plays similar like this videos

@Luma_plays 2 года назад

@@techrama9642 I normally record those when i find time inbetween all the other series or when i don't have ideas for new vids (but i always have new ideas :D) Is there a specific build you would like to see? Let's check so far I only have done: Sulfur Geyser, Hydrogen Vent and Cold Steam Vent -Tamers, Pokeshell Ranch and 2 Seed Replicators. There is lots left to do. Hot steam vent tamer, toilet loops, petroleum boiler, natural gas, petroleum generators etc.

@bahrisean9116 2 года назад

😁sorry bout my English, i mean lets play .

@Luma_plays 2 года назад

@@bahrisean9116 Your english was fine. The term "series" was just a little bit to generic :)

@suckgamer2901 2 года назад

it's monday bro !

@Luma_plays 2 года назад

Told you soonest would be sunday :/. In all honesty i only finished recordimg yesterday. dupes beeing dupes made my attempts at building something useful harder than necessary. I normally need 2 days editing. So no promises sorry

@suckgamer2901 2 года назад

@@Luma_plays today is monday already, hope to see new vid soon

@Luma_plays 2 года назад

@@suckgamer2901 By the way what country are you from? I think i have audience in all timezones. here it is monday 8:45am :)

@suckgamer2901 2 года назад

@@Luma_plays Vietnam,it's 9:19PM monday

@Luma_plays 2 года назад

@@suckgamer2901 Oh interesting, sadly you probably read the bad news.. PC went poof everything black. Now I gotta wait for parts. But I might release a prepared short.

@thienluong3796 Год назад

Why don't make it solid immediately then pick it up??? We can spare 1 auto sweeper and the pump also make it more compact

@thienluong3796 Год назад

Build 2 wall on 2 side make top open put some water and temperplate in then run the loop in we will have 50-60 C sulfur run rail inside the insulated wall then feed the plant. Sulfur heat have no effect the tree so why bother cooling to 30C? Grubfruit have 50C upper limit is also easy to achieve.

@Luma_plays Год назад

I honestly can't remember. If you only have the sweeper and the conveyor loader is full the sulfur sits in a pile down in the lower room.

@Luma_plays Год назад

If it would only be for grubfruit sure you can save power o cooling. But the larger the Delta-T the faster the cooling. Also you can heat up your base if you have it at 50°C. When you also plant mealwood then those could overheat. If you only have grubfruit and ranches then 30°C could also be fine.

@thienluong3796 Год назад

@@Luma_plays yeah! But we need temp control for sleet wheat anyway. So I prefer to build a ice buffer box to control all farm in the end then. Put too much effort to build big tamer only benefit 1 tree is not worth it at least with me. But building like you is cool too.

@suckgamer2901 2 года назад

Next lets play vid bro ?

@Luma_plays 2 года назад

Soonest would be Sunday but let's be honest i probably need longer to edit it. Maybe i try to keep it shorter so i can try to have a schedule :/ I have so much interedting ideas and so little time to do them all sorry for all the wait. And thanks for the support :)

@bahrisean9116 2 года назад

cool

@suckgamer2901 2 года назад

@@Luma_plays sounds exciting,hope to see it soon

@MrLight85 2 года назад

hard loop. NOT EFFECTIVE!

@Luma_plays 2 года назад

Mr Light would you mind elaborating your comment. I have no clue what you mean with hard loop. This worked perfectly fine on 20 different instances over a span of 400 to 600 cycles.

@Tzizenorec 3 месяца назад

The use of solids on a conveyor belt loop DOES look kind of inefficient to me. (Perhaps that's what he means?) I think the more usual practice is to use a one-way conveyor belt with a timer so it keeps the solids on the belt for the right amount of time.