Bro, thank you so much. I have a different machine brand, but your video solved my issue. On my QHC/Revhon, it’s the screw on the left, and I was able to use included allen wrench by sliding the main shaft all the way to the left. Many thanks!!!
Thank you so much for your time.. I will definitely try this and wish for the best. I will keep you posted on the results . You are truly appreciated 🤟🏾❤️
My Ricoma did the same thing, waiting for parts. Since day one I have had trouble with my Ricoma machine breaking down. I am considering trading it in for a different brand, the problem is no one will take a Ricoma as a trade in.
If it’s slipping or you can’t get a good visual on it, wait for help, or get a better tool to give more leverage. You may can put it on another needle to see if you get better access to the screw. Crack it just a bit than go back to needle one and fix it. Hope this help and get you back up and running
After reset. Make sure you are hitting switch to the top and the light should be red then start. Always try to turn knob first to make the needle arm pop up. Are you getting a lot of no needles?
Turn the same gear till it lifts the needle arm and the arms align with the other needles. (Machine will no longer be at 100) but you will be able to move the wheel. Move needle to 1 put back at 100 and follow instructions in video
