Nespresso coffee machine - disassembly, restauration, reassembly 

Thank you so much for sharing this exploration! It gave me the confidence and insights to clean and fix my own machine 👌💪

I love it! So easy and I can't imagine life without my Keurig now.

Grand merci pour votre vidéo, c'est top!!

Nice video, yet the disassembly sequence is not exactly right - by detaching base first, you risk breaking the tabs at the bottom of back panel, and stressing the flow meter and wiring. First undo both deepest-recessed screws at the bottom (these hold the front panels) while leaving other bottom screws in place, and you'll be able to remove both lower front panels just by pulling them at the drain drawer socket. Then undo two black screws on the top of back panel, and two more on the sides of the front that were hidden by front panels, and you'll remove the back panel easily, without messing with wiring, piping or tab breaking. Assemble in the backward order. Usually there is no need to remove the base at all, and this way, as bonus, you'll be able to test the machine in the mid-way of repair. Also avoid removing front knobs needlessly - these break easily if installed improperly.

Vídeo muito bom!

Great video! Got my machine perfectly working again! Some sequences are a bit unclear, but with some common sense it's quite easy. Thanks!

Thank you very much for the vid. Saved me some money!

Thanks flor the vídeo. Really helpful just now 🤣💪🏼👍🏼👍🏼

The piston was locked, after 3 times i got it working again, however now the coffee doesnt come out of the nozzle.

Cool video, it looks like a lot of work! I've been watching it since we have a problem with water leaking from under the machine, it comes from somewhere in the middle of the machine and it is almost constantly (not only after brewing a cup). Before I go buy the special screwdriver, do you think it can be fixed? I guess something is wrong with the pipes leading from under the water tank to inside the machine. Many thanks!

Hi, I saw your video, very good, I have a C80 machine that doesn't take the capsule all the way, it keeps holding the capsule and no coffee comes out, can you help me? Tks Francsico - Brasil.

Any idea about error Blink Orange 5 seconds?

do you know why water goes to capsules reservatoir instead brew the coffee ?

Hey! do you happen to know where the sensor for the slider is located? my machine thinks the slider is open at all times even when it isn't, im hoping a quick cleaning of the slider sensor could solve the problem

is there a way to clean the sensors really well without disassembly? mine keeps saying the capsule container is full... nespresso has sent me two new bins. the first one seemed to work for a bit then it stopped. the second one, not so much. open to suggestions.

I have a problem, I cannot get my machine out of descaling program anymore. When I press the on/off button for like 6-9 seconds, the blinking orange light goes steady, but then the large cup starts blinking and nothing works. When I push the on/off button again then on/off button blinks a few times blue light and then orange light blinks again. When I push the on/off button 9 secs and after that put temp on high, and after that push on/off button again then all cups, temp and Nespressolight blink a few times and after that all lights go out except for again the orange light blinking. Anyone have a solution for that?

I think I need to strip mine later; it wasn't used for a few months and now the coffee just leaks into the internal pod bin instead of coming out of the hose. It's probably full of hardened goop.

No Dice. Blue light still doe not come on... :-(

I'm left with a all plastic part

Does it still leaks, right ?