NESPRESSO O-ring | Step by step guide to change and prevent leaking 

Thanks for sharing your knowledge - it's awesome to have someone repair things and not throw them away. Your videos are so easy to follow. Thank you

Thanks Mr.Adrian. I got this machine one week ago. Now i know how to DISASSEMBLY the machine. Thanks to you..

My Nespresso is old, but still works and just leaks. Your videos have prevented it from being landfill.

Manufacturer: How overly complicated do you want disassembling your machine to be? Nespresso: Yes

Thanks for this, took my own machine apart last night and (hopefully) have the correct size of O-Ring arriving today from Amazon! That was one hell of a job to disassemble - I'd never have been able to manage it without your easy-paced video!

Great video. Couldn't have opened the machine without it. Thanks for posting!

Finally a decent video of reassembly! Thank you so much!

That was very insightful. I've repaired my machine, using your instructions, thanks you

Amazing. Now I will try to do all of this with my coffee machine. Thanks.

Muito bom trabalho consegui arranjar a minha máquina graças à sua boa e profissional explicação...muito obrigado. Bom trabalho.

Very detailed, clear and professional! Thank you!

Thanks for the magnificent video. I had already disassembled the coffee maker on a previous occasion (it has been so long ago that I no longer remember the fault although I was able to fix it) But this time, due to a water leak, I was not able to get to the problem until I found your video, detailed and efficient. The pity is that it still leaks slightly after changing the O-ring. I have already read in the comments that there is another small O-ring on the boiler. Now I don't know if I'll try it again. The truth is that I don't use it much. The repair was rather a challenge. Thank you anyway.

Bravo Adrian. Un video explicit pentru tot mapamondul. Respect

Excellent, would not have stood a chance without this, many thanks

Thank you, your video was very helpful, I have to do exactly the same with my Nesspresso.

I solved the water problem myself of my Le cube machine thanks to your video. Its an old machine but good quality,,the next problem is now,,one of the buttom doesn t work but light is still working

There are two o-rings. This one behind the pod, the dimensions for this o-ring is 31.5mm (inside diameter) x 3mm. There is another tiny o-ring inside the boiler unit. The plastic and metal parts can be separated by twisting clockwise (it requires some force). Inside is a black cone with a small o-ring on top. The dimensions of this one is 5mm (inside diameter) x 2mm.

Thanks a lot for this very helpful tutorial. Lots of weird plastic sounds. But at the end, this evil machine works like a charm now. Cheers m8!

Thanks from Brazil my friend! Learned quite alot with you. Great job! Best regards!

Bom dia obrigada pelo vídeo foi o único q achei ensinando a montar parabéns, eu tava tendo dificuldades pra montar aqui um desses e vc ensina muito bem,mesmo com as legendas é muito bem explicado obrigado, vc ganhou mais 1 escrito em seu canal

Excellent video mate. Thanks.

Excellent tutorial my friend. Thnaks a lot !

Was going to buy a new machine and this video saved me 70€. Replacement o-ring= 0.25€ and 1hour of pure joy. All the best for you!

Grazie per il video, assolutamente di aiuto, sei veramente bravo, buon lavoro.

Consegui salvar mais uma maquina graças a sua ajuda, muito bom seu video. Muito obrigado

Thanks a lot, very clearly explained.

Very nice explained video. Thank you

Thanks for sharing your knowledge -

Very very informative video, all the trick and tip explain in every steps, good job!, subscribed!

Thanks! you saved my morning !

Merci pour votre explication qui m'aide plus de résoudre ce type de problème.

Thanks for sharing, it helped me a lot!

Great video HOWEVER, o rings out of there are made of (often) unspecified materials that may not be safe for food contact. Silicone is typically the best choice but all I can find is either Nitrile or fluorocarbon rubber. Krups has done an amazing job in preventing repair shops or dyis to find small parts so I have no idea what material the original o-ring is made of.

Merci, grâce à vos instructions, j'ai reussi en quelques minutes à ouvrir la machine. C'est vrai qu'il ne faut pas hésiter à forcer un peu, ça ne casse pas.

Obrigado, ajudou muito seu vídeo 👏👏

Great video, thank you. I have DeLonghi nespresso EN80 and it has exactly the same construction.

Thanks you saved my machine!!

O vídeo muito explicativo. Muito bom, me ajudou muito 👍

Thanks Adrian for the tutorials. I have an Esenza Mini. When I insert the capsule and turn on the machine, the hot water comes out of the opening of the capsule. It should be noted that the front part with the holes is clean. Any idea what the problem is?

Great video, thanks.

Adrian, a Big thanks for your video 👍👏👏🇬🇧

Hello Adrian. Really great video. Can you please advise what size oring you used? Is it std nitrile or silicone....thanks

Thanks for a very good video, do you have a video for Krups nx250 o ring replacement?

Excelente!👍🙏👏👏👏👏

Thank you.. soooo much.

Hi Adrian, many thanks for the detailed repair procedure. Excellent work! What are the exact O-rind dimensions to purchase before attempting to repair? Internal diameter and thickness?

ขอบคุณครับ

thank you so much bro 👍

good job!!!!!

You are very strong 👏

Please can you tell me if there is a component that the nylon pin with the small spring fits into? Does it just fit into the star shaped aperture in the heater unit or is there a piece that I am missing? Hopefully not!

Adrian thank you so much for the tutorials, much appreciated! My Inissia leaks a lot from the spout (nozzle) where the coffee comes from. Any idea if it's fixable?

Thank you man

Very good! I will save my machine and the planet... but where to find the o-ring? Thank you for your video. Very clear.

Hello Adrian! Where can i find a replacement O-ring from inside the brewing mecanism of a Citiz & Milk?? Thanks!

I just bought a new one from Nespresso and a fair bit of water winds up in the tray with each coffee. The recycling company has already picked up the cardboard box and packing material so it would be a pain to ship it anywhere but this seems quite annoying to replace the O rings myself. Thanks for the video though.

Would be helpful to give the size etc. on the O ring(s) so we can try to find them. Also Metric or Inch

Hi Adrian bought some types of seals from china and world fluids, I was wondering what type of piston o ring you use?

Where did you purchase your parts from? I am looking for a CITIZ auto primer…

Excelente técnica e conhecimento do aparelho. Por gentileza, façam um vídeo traduzido para o português (Brasil). Obrigado.

Hey! Love that you uploaded this video. I followed it exactly and everything worked exactly as you showed and I replaced the o-ring. But it leaks more now than it did before, this time a new leak from the water tank junction. What might have happened for me to mess this up? It didn't leak from there before!

Thanks

Mine (same as your model) has a low caudal of water. It does not look like is spilling out water. Just a weak stream. I tried to clean the capsule hole with a toothbrush and apparently got a little better but still not right. How could I fix it?

You know those very brittle clips you mentioned? ... Which part should I order if one of them snapped?

Fantastic video, thanks. How often do I need to replace the o rings if I use 2 pods a day?

hi thanks for the vid i replace the O ring 31/37/3 and i have still the same leak any idee ?

Hi, My Magimix Nespresso machine is stuck in descale mode. I have tried all recommended reset options and spoken to Nespresso. Any suggestions on a fix before I scrap it please

No 17:28 minuto q vc amostra a parte encaixada ,no meu aqui não tá encaixando fica uma pequena brexa entre as partes já apertei ,soltei várias vezes e seguindo seu vídeo mesmo assim fica essa brexa ,quando eu desmontei não tinha reparado se tinha já essa brexa ali

he must be Nespresso Co. as engineer worker? /? very interesting to see how he can fix the difficult machine

Buongiorno! Grazie per il tutorial, io ho comprato le guarnizioni di ricambio su Ebay, già che c'ero le ho cambiate tutte e con poco più di 5€ ho risolto tutti i problemi

Hi, Thanks for the video, i managed to follow the instructions but the O ring was in great condition. We then tried the machine without the trays in place and surprisingly all was good. The leak happens when pulling the handle to discard the old pod, that's when a ton of water comes out (well, about 10 or 15 mls). Any idea on the issue, maybe as we are not using proper nespresso pods, we are using compostable?

Tank toi frère

where do you buy/get the parts?

Does anyone know where to find a tutorial for same problem for the Nespresso Essenza Mini

What are you guys using to wash the parts? I submerged everything in warm water with dishwasher detergent and brushed with an old toothbrush but still some areas are dirty. How about vinegar? Anyone tried it? Thanks!

TKS

Is it a good machine?

Dear Adrian, thank you for all your excellent videos. Ik want to know WHERE you can buy the O-rings for the nespresso machines (stop leaking), thank you Edward (netherlands)

Many many thx Adrián for your video! I safed mi Nespresso Inissia Krups 😍😍 Have you video for pump problem (not draw water from. The thank) for the same machine? Thx

Mulțumesc for another great video, Adrian. Beyond the O-ring, my Magimix machine has a flat metal ring, which appears to be broken. Can that also cause leakage? Can share pics if required.

mine lick only for 20 seconds after the erogation. is that the case?

where can I buy de O-ring?

Bonjour le joint ou je peux le trouver sur le net j'ai trouvé 42mm celui-là il fait 37mm je trouve pas

Back pressure due to gunked up outlet surround channels will be the issue....

Thank you so much Adrian , but where I can buy those o rings ?

thk

Very good tutorial, thank you very much. Could you tell me the size of the o-ring? Or the link where to buy it. Best regards

bravooooooooooooooooooooooooo

After following your video to replace the o ring my machine won't stop flashing the lights I can't do anything. Any idea on what's wrong? Was working fine before

The size of the original o-ring please... Inside, diameter, if you can. 31.5mm (inside diameter) x 3mm it is good ? Thanks a lot

Oh and I should explain that I started using knock-off pods for about 6 months before this problem happened. Guess I should have stuck to original Nespresso pods

Where to buy the big o ring ? The one in the exit of the brewing head?

Where are you located?

Adrian, where can I buy the o-rings? I can't find a supplier. Maybe Ali-Express?

Vous avez trouvé où le joint

Can you provide a link where I can buy the seal (EU)?

Replaced the oring to a new one 32x38 but it still leaking water into the drip tray quite heavily, no change to prior seal. any ideas? :)

no mostraste si solucionó el problema, tengo entendido que las juntas tóricas típicas de fontanería no se adaptan bien al recambio original. el anillo interior es plano y no circular como la que haz colocado.

Hi Adrian. Perhaps you can help with my problem. My INissia works fine, but the lever has started to jump up once the pump is working. The only way to have it work is to press down and force the lever to stay down. The lever does not open when there is no capsule in the machine and the pump is working. Any insight you can give me? Thank you very much.

Where did you find the correct O ring which is actually shaped as a D ring? Having trouble finding this.