Nespresso Vertuo Next leaks coffee during brewing 

Great video! I’m not one to post a comment but this sir was deserving of one. The explanation was clear and simple to follow. I found where the block was and cleaned it out, plugged the machine back on and viola! It was working again.

Great video. I had the same problem, watched dozens of other videos, I found your instructions excellent, I cleaned the overflow and save myself buying a new machine. Thanks Edward

Many thanks. Turned out that my outlet was partially block by a chunk of scale/coffee causing excessive overflow. Would never have found it with out opening it up. Excellent work sir...

Kudos Edward. This was great. As for the side panel, mine was very hard to move. I used a small screwdriver in the corner to help me push. It went off easily.

Mine was leaking coffee from somewhere than what you described, but opening it up and cleaning it fix the issue! I’m so relieved, thanks for the great and easy explanation!

Thanks! After about 1000 capsules mine developed a leak around the nozzle, this was the fix!

Thanks. Fixed my machine after this video. Easy. Panel removals a bit sketchy as you’re afraid to snap a clip but I pried it a bit with a flat head. Easy after that.

Fixed my machine thanks to your video. A million thanks. 👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽

what a great and simple follow clip. One big thanks. I'm experiencing a different problem, aloud noise when brewing start and only a small amount of coffee is then released. My uneducated guess is the bearing, but how to replace it without destroying the machine. Maybe somebody had a similar experience with a solution

Helpful.. mine leaks occasionally as well. I just Descaled it..hopefully it breaks up the gunk in the overflow tube as well. Thanks!

YES! Thanks so much, this fixed my leak.

Hello, thank you for your explanation of how to disassemble the NESPRESSO KRUPS. Is it possible to show me how to disassemble the rest please, thank you. Best regards.

Thanks so much for this video. It really helped!

The proper tool is a T10 security bit if you do not have it you will struggle

Hi jRo, I was notified that you had a question. I just used a thin flat screwdriver that fits in the star thing.

You fixed my machine ❤️

Thanks for the great video. My machine is no longer leaking after following your instructions The overflow tube was completely clogged which was causing the leak as you said. Wasn’t easy to clean it out but ended up using a long qtip and rinsing out with a syringe. Is there a way to pull out the tube to make it easier to clean? Probably needs to be done periodically.

Very helpful! Thanks so much!

Can you show exactly how you remove the screws from the bottom?

Great video. I have the same leak. I ignored it for months. Now the machine trips the power as soon as i turn it on. Without brewing a cup of coffee. Any idea what the problem could be?

I’m having a weird problem with mine…the button doesn’t work. It’s solid White…good to go, but when pressing the button, nothing happens. I also have water in the round cup that the pod sits in. I have a feeling that it’s clogged…not allowing the water to fully drain into the coffee cup.

Ty bro

@4:02 The overflow tube should go into a receptacle and not into an open space that can drip down to an expensive marble countertop to stain it.

What is the tool name did you use to take out the screws for the machine?

Here's a little trick Push the capsule holder with toilet paper or paper towel to remove excess water from the cavity and it prevents leaks

My machine is leaking water & ive only had it a week now

Biggest junk i ever bought, first machine broken, second after 1 month of use. never again. utter garbage.

complete garbage product, im on my second 1, they dont last more than a year. i buy a new 1 and return the old one in the box