NEW RCinPower Whoop Motors // 1mm shafts

Подписаться 59 тыс.

Просмотров 8 тыс.

50% 1

Broke three frames during my time running these motors around. Note the TinyWhoop Gold motor is not 0802 it is 8003. Sorry for my confusion.
AliExpress - bit.ly/3VkUZSO
WeBleedFPV.com gates and batteries
Gates/Led Lights - webleedfpv.com/oeIvb3
Batteries - webleedfpv.com/yfw1CC
🔥Daily FPV Gear🔥
► Goggles Orca FPV.One bit.ly/3eAgsBw 💣
► Charger SkyRC Q200 QUATTRO bit.ly/2KgUd8i
► Radio I use RadioMaster Zorro bit.ly/3JUiNrr
Zorro @ Amazon amzn.to/3uDFt8J
► Best Micro Batteries!! 💯 GNB 💯
Banggood bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) bit.ly/2ZsCob5
► Adhesive Welder amzn.to/2IpKKHj
► Motor Wire Tape bit.ly/3airvyv
► Same tape from Amazon amzn.to/3iJjTrT
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► Banggood - bit.ly/BG-NB
► RaceDayQuads - bit.ly/RDQ_NB
► RotorRiot - bit.ly/3N40Ebp
► AliExpress bit.ly/3vMbOZK
► GetFPV - bit.ly/3rnx05U
► Amazon - amzn.to/3iJjTrT
► Emax - bit.ly/3sn3AGm
► MakerFire - bit.ly/37TAmGo
► Heli-Nation - bit.ly/H-N-NB
► BetaFPV - bit.ly/BFPV-NB
► AirBladeUAV - bit.ly/ABUAV-NB
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon + Discord
► / nickburnsrc

Наука

Опубликовано:

26 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 99

@Xray-Romeo Год назад

Nick has got to be the most wholesome guy in the FPV RU-vid community. Really enjoy all of his videos.

@personcurios830 Год назад

I stopped flying a couple yrs ago but hes channel is the only one I still watch time to time

@lemonsquareFPV Год назад

Double ball bearing means, top and bottom of the stator. There was a bunch of motors that had a bushing on the top and bearing on the bottom. That’s why they say double, because on especially 0802s it is not common. T-motor was the first to release I think, but the prototype Happymodel 0802/0702 from a year or two ago, were the first I had seen, they never got released I think. GTS V3 is the line of motors, the V3 have generally been very efficient, well designed motors. The 1002, 2105, 2107 being my favourite V3s. Got the 0802s on the way, but am currently testing carbon motor shafts on 0802 and 0702s so I won’t get to them for a bit. Thank you for all you do Nick!

@KCQuadTronX Год назад

GREAT FLYING ITS CRAZY HOW FAST YOU GET IN THE HOUSE

@porshacarroll9600 Год назад

Nick u was hauling a$$ heading through the treadmill timestamp 9:07 😂🤣🛸💨

@kurtzFPV Год назад

Those analog cameras are pretty decent.

@ryswe Год назад

Ive got a set of these 0802 27000kv on the way, can't wait!!!!

@crash_lander Год назад

I love my AG01 mini’s, also I couldn’t give up my Jumper T lite, so I managed to install the Ag01’s into my t lite… oh my god what a perfect combination.The cnc gimbals have so much more resolution and are very precise. You should try doing that mr. Nick, just for fun.

@NickBurnsFPV Год назад

I don't use my t-lite all that much now that I have a zorro with the ag01 minis. And yes, I enjoy them so much.

@marathi22 4 месяца назад

The black plastic frames are more durable in my opinion. Also, cut a couple of small strips of electric tape and apply on each side of the the breakage point. It'll be almost as good as new 😉

@D18racer51 Год назад

Love seeing new whoop motors!!!Great review as always!

@MCsCreations Год назад

Fantastic flying and review, Nick! 😃 Awesome little motors indeed! And they look beautiful!!! Stay safe there with your family! 🖖😊

@8BiT_fpv Год назад

Mr Burns! Nice rips! Those motors seem promising. Hope to check em out sometime. Thanks!

@CostaFPV Год назад

Tks Nick, good review as always 🙂👍

@pirateradioFPV Год назад

I have the full-size ag01, I concur. They're really good, I hated to admit they're worth the money considering how much they charge for them.

@NickBurnsFPV Год назад

yes, they are expensive and likely a rough decision considering the price point but after using them its so worth it. But they were sent for review.

@pirateradioFPV Год назад

@@NickBurnsFPV I paid less for the radio on the pre-order than for the gimbals, that was my main gripe about it 😂 You can still get the T-lite V2 for way less than the mini gimbals are, which makes it difficult for me to believe they're that expensive to manufacture. But, it is what it is, I suppose.

@NickBurnsFPV Год назад

@@pirateradioFPV pyrodrone has a special edition for $199 with ag01 minis and blue highlights :)

@luiscarapito572 Год назад

Thx, Nick. Really what i need, great review🖖

@kingjam6433 Год назад

Will be good to see what the long term durability of these will be, bearings vs bushings, love your work by the way👍

@ragndroneman Год назад

Just bought a set to the UK. Thanks Nick.

@NickBurnsFPV Год назад

Nice. I hope they work out well on your whoop.

@jethfpv 11 месяцев назад

Don’t know if someone’s already said this but the wobbles is your packet rate being at the wrong setting for what the rx is set to. Love the videos too!

@abertheham Год назад

I also make up facts for friends and family to keep them on their toes lol Awesome flying and another awesome review. Gonna have to try a set once I get through all these 30kkv TW EX0802’s… Thanks, Nick!

@NickBurnsFPV Год назад

whoa, those 30000kv must be rockets!!!

@TinyWhoop Год назад

Oof a harsh typo! Lots of people are messaging me about this weight misinformation after the image was shared. Really surprised to see the first positive review for the rcinpower motors show up on your channel, I pm'd you bench test results.

@echobeefpv8530 Год назад

A few comments. First, good review video, very through !! Now I know what to use to replace my Happymodel motors. Second, the supply chain here in Canada usually follows the US, so I may only start seeing these locally next year, but I have a local shop who does some wonderful things ( Rotor Village ). Last, the frame breakage is pretty common, if you are zipping around, not just cruising, at least in my experience. At least frames are cheap.

@johannesnacpil7342 Год назад

I tried that Thrust linear for my beta95x pusher, that helped a lot. Also made sure I thanked Brandon beans on the live chat last night, since you mentioned him on the foxeer Foxwhoop35 review on how to fix that wobble on the dives.

@NickBurnsFPV Год назад

Nice. I have been testing another way with TL way lower. So far the results haven't had much impact.

@scu-dub Год назад

Man nick I swear I have been going overtime on my flying and you spank the heck outta these whoops lol I also do the same with words and my step kids think I'm crazy and make up words they thought I made up nincompoop when they heard me call someone that lol great review at a perfect time I just got a new mobula7 1s elrs after my old one had the gyro issue now I wanna build another one with different motors and I'm going with the goku fc that you mentioned 👍🏽

@bull_shannon_fpv Год назад

💗PANK!💗 FTW!

@sketchpv3080 Год назад

PyroDrone has some kind of exclusive Zorro Max transmitter with preinstalled AG01 gimbals. Saw it on their website yesterday but haven’t actually heard much about it.

@NickBurnsFPV Год назад

Yes, and they have blue color too!!

@KOrnhOliO1 Год назад

Co0ol!

@melshabong Год назад

Great video! Could you install the AG01 mini gimbals in the t-lite as Heads did in his radio? I have the t-lite and have been looking at those gimbals for an upgrade.

@KOrnhOliO1 Год назад

Keep in mind, those gimbals cost as much as that radio! I'd put them in the RadioMaster Zorro if it were me. At least then a top shelf gimbal is going into a reliable, quality built radio. Putting those AG01 gimbals into the T-lite is like putting a Corvette motor into a Chevy Spark! Jumper products aren't made to the quality of Radiomaster. Those T-lites have a very short life expectancy. All sorts of people have had them fail on them... Even Nick! If it were me, I'd upgrade the radio, then those gimbals fit perfectly! Why Jerry Rig something that's a 10 out of 10 into something that's a 5 out of 10? 🤷🙄 I know you like your T-lite, but Jumper makes the lowest quality products in the market.

@danielgrplb Год назад

The Webleed Fpv direct plug batteries fit better in my opinion. I have both, the downside is not every quad have long enough pigtail

@NickBurnsFPV Год назад

I didn't get those as they aren't as friendly to different battery led lengths.

@KOrnhOliO1 Год назад

Those GepRC 0802, 17000KV motors I bought on Amazon for only 7 bucks a piece on Black Friday, got delivered yesterday! Black and Silver with a really co0ol CNC pattern cut on the top. I love Spedix motors and these are slick! Can't wait to put them in a build!!! I also splurged and got one of those Flywoo Versatile 12 amp AIO FC's with everything built in! How the heck they got 6, count'em, SIX UARTS on that tiny little board, with ELRS built in, is beyond me! Flywoo is making some Top Shelf gear, that's for sure! Best deal ever on that AIO is still going on Flywoo's site. I sure like RCinpower motors! They're really good quality too. $12.89 + shipping for an 0802 is getting up there! Too spendy for an 0802 motor! That's 52 bucks + shipping for 4. 😭😵‍💫

@NickBurnsFPV Год назад

I to bought the flywoo aio, going to swap it into the 2s ws build

@KOrnhOliO1 Год назад

@@NickBurnsFPV Looking forward to seeing that, but isn't their small board a 1s only board? I'll be using a Vista with a Nebula Pro Nano. 2S and only 2g difference. But, 120fps, low latency, 1200mw!, 810P with V2 goggles, and durability and reliability WalkSnail isn't close to. Go for DJI, Bro! 😎🤘

@NickBurnsFPV Год назад

@@KOrnhOliO1 The versatile F405 is 1s-2s with 12am esc. Expensive, but really good board and the elrs is uart based with wifi for easy flashing.

@MeGuess_Adventures Год назад

Cool guess I’ll grab a couple of these along with a few more parts. Never hurts to have some extra parts right!?

@NickBurnsFPV Год назад

yes, I am really bad about stocking up then something new comes out and I end up giving those previously purchased parts away.

@valden Год назад

Looks like a great option, still feel they could have done 1.5mm shaft and kept them pretty close to the happymodels with 1.5mm shaft. I may pick up a set since the ball bearings intrigue me

@NickBurnsFPV Год назад

yea, I was surprised they were 1mm.

@sketchpv3080 Год назад

Looks like some great 0802 motors. I’ve been using only EX0802 25k motors for the past year but it’s annoying that once in a while a motor just stops working. I’ve probably replaced 4-5 motors. 4 randomly quit working and 1 was a bent shaft.

@KOrnhOliO1 Год назад

Maybe try another brand?

@NickBurnsFPV Год назад

Do you know if the motors are slipping a magnet or maybe a motor wire is torn loose?

@NuttGreez Год назад

Here in Hawaii we have a top soil composed primarily of eroded basalt. This means the common dust build up not only creates drag, but is also magnetic, making it harder to just blow em clean. Every so often I will need to disassemble and blue tack up any debris. Another little thing with the older happy model motors, vertical shaft play. More play, more likely to bind. I use brass or stainless shims to get them just right.

@ghafoorhussain6677 Год назад

Thanks NB, keep us updated on how these motors perform over time. Totally with you on making up facts, I do it all the time, but her in doors accuses me of lying??? I don't get it 🙂

@NickBurnsFPV Год назад

lol, its funny how a topic will come up and I will rattle of something real quick about it, and they all look at me with that "really?" look. then I tell them to look it up and walk away. So much fun, sometimes its fact sometimes made up. Keep them on their toes.

@andywakelin1380 Год назад

IIRC Emax 0802 that comes in the nano hawk has ball bearings top and bottom.

@sail_fpv Год назад

Hi, What camera have you used in this build? Thanks in advance

@amin0_acid310 Год назад

MORE 1.5mm 0802 motors yay! Being new to FPV this year and having trashed a handful of motors with the 1mm shafts, these are coming in at a good time. Plus they are colorful. I've thought about AG01's for my T-lite V2, I ended up finding a V1 TX16s-Hall edition. Front facing tension adjustments and touch screen and saved some clams ,which I used for an elrs module. Right away I noticed how smooth the gimbals felt. I can only imagine AG01's feel even better, but I got an entire radio instead. Back to motors, tempting to buy some just to keep kicking around until that one crash. Greatly appreciate the video, happy to see more 1.5mm motor shafts for whoops. I'll take that little extra weight. Stay safe, stay warm! Cheers!

@KOrnhOliO1 Год назад

Supposedly, the hall gimbals that come in the TX16S are the exact same as the AG01's, but plastic instead of CNC metal. Shouldn't be any difference at all in performance. JB has a video where he compares them. Same thing, but metal vs. plastic. 😎🤘

@NickBurnsFPV Год назад

These are 1mm shafts.

@amin0_acid310 Год назад

@@NickBurnsFPV Looks like I needed more coffee >_

@NickBurnsFPV Год назад

@@amin0_acid310 I am working on that as well 😁

@amin0_acid310 Год назад

@@NickBurnsFPV I suspect my brain filled in what it wanted to hear. I'm not opposed to 1mm shafts and variety is the spice of life, by the time I trash all my quads we might see more. But I still have a lot of 1mm props to burn through too. Plus I like the Blue/Pink ones.

@grindz145 Год назад

Touchdooooow! 😁

@NickBurnsFPV Год назад

Note the TinyWhoop Gold motor is not 0802 it is 0803. Sorry for my confusion. RCinPower 0802 ⬇ AliExpress - bit.ly/3VkUZSO WeBleedFPV.com gates and batteries Gates/Led Lights - webleedfpv.com/oeIvb3 Batteries - webleedfpv.com/yfw1CC

@vonpwnz0r Год назад

8003 is a pretty big pancake motor. Maybe it was 0803? 😂

@NickBurnsFPV Год назад

@@vonpwnz0r ack, in my haste to correct I made another mistake. Not my day.

@ericnelson5028 5 месяцев назад

@Nick Burns Quick question, do you know how I would find those happy model motors with the 1.5 shaft. I tried googling and couldn't find them. Is there some kind of prefix to the 802 that denotes they are the thicker shaft? Thank you

@NickBurnsFPV 5 месяцев назад

I believe these are the motors your asking about www.racedayquads.com/collections/08xx-brushless-motors/products/happymodel-rs0802-20000kv-micro-motor-choose-your-version

@recifestargazer2192 Год назад

Using these on my meteor65 pro hdzero. It weight is under 24.5 grams. Would love to find some Reny screws here. But i can't find It easily

@hookedfpv3219 Год назад

Hey nick got a question, I purchased the 27,000 kv motors and put them on my mob6 whoop but the board and or battery got real warm I don’t know if it was one or the other warming each other any ideas or suggestions it also drained the nectar 300 mah battery quickly thanks

@NickBurnsFPV Год назад

I don't see much information on your setup, so I can only guess that we have a weight and efficiency issue draining the battery. Temp warning is from the flight controller, I doubt the motors are playing a role in that, but if the pid tune is way off it could cause the flight controller to be working extra hard.

@zachmachina Год назад

I think you might have the wrong motor for the tiny whoop 802. The gold unibells should be right at about 1.9g. The weight in your picture is more in line with the tiny whoop 803

@NickBurnsFPV Год назад

oh dang your right. I will need to note that in the video description.

@IdShift Год назад

Hey Nick. Have you ever posted a realtime build video? We need some ASMR soldering action!

@KOrnhOliO1 Год назад

Yes Nick, build it and they will come! 😎🤘

@NickBurnsFPV Год назад

I haven't done a build video in a good long while. So tedious

@RobertoCamachoNoellySerrano Год назад

I bought a set of 4 22000kv and a set of 25000 kv. I didn't buy the 27000kv because I read that they're FC killers specially for the happymodel X12

@Maxim_Nub Год назад

so the main question was not answered? do they fly like a 5 inch?

@NickBurnsFPV Год назад

ha, no at least the 5inchers I have mistakenly flown in the last year.

@fluoxethine Год назад

please make naked O3 whoop and compare it to Walksnail and HDZero. thx!

@NickBurnsFPV Год назад

I would need the O3 and goggles...er I think I would need new goggles.

@stelic9515 Год назад

Is good they are double ball bearings but bad is only 1 mm shaft

@themadhatter196 Год назад

Bought meself four of em'. Gonna compare to the old 25,000kv tmotors. Btw when has anyone had a motor last long enough to wear out the bushing, or bearing.... betafpv se0802 19500kv are 1.86g average over four motors, where the beta 0802 19000kv 2.01g average. Newbeedrone plaid 0802 20,000kv 2.15g average. Old tmotor 0802 25,000kv (black) 2.05g. Webleed 26,500kv 0702 1.55g. weBLEED

@NickBurnsFPV Год назад

I have noticed some of my older motor get noticeably more noisey/rattley. But not stop. I do think the performance and efficiency long term breaks down.

@Mupshot Год назад

I have gone through a few mobula frames in the past couple weeks.

@NickBurnsFPV Год назад

get that grey v4 frame. Its pretty robust. Hopefully your not going through that version

@Mupshot Год назад

@@NickBurnsFPV yep. Just bought 3 v4 frames. Not sure what the others were, but the last one lasted a while until I flew in 20deg windy parking lot. I blame the cold

@NickBurnsFPV Год назад

@@Mupshot yea, cold is not a friend of plastics. :(

@KonstantinFPV Год назад

Is there a way to fit ag01 in jumper t-lite or t-pro? That would be interesting to see.

@ViralFailsCN Год назад

There are a few videos on how to do it

@KonstantinFPV Год назад

@@ViralFailsCN oh that's greate. Need to search then.

@NickBurnsFPV Год назад

here is a video on it. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wslSmuW3DDI.html

@ChainsawFPV 9 месяцев назад

Not sure about a nickle, but I remember gas at $.99 a gallon.......... Lol

@modquad18 Год назад

Good info here, thanks! Hey, anyone have an IRC LapRF they want to sell?

@stephankahlau6759 Год назад

Meredith 🤣🤣🤣 old girlfriend?

@NickBurnsFPV Год назад

No, character from the Office. When i watch "traditional TV" its almost exclusively The Office.

@stephankahlau6759 Год назад

@@NickBurnsFPV HAHA me too, listening to office ladies at work right now.

@NickBurnsFPV Год назад

@@stephankahlau6759 I need to give that a go as well. My wife listens to Pam and Angela from time to time. I hear good things.

@stephankahlau6759 Год назад

@@NickBurnsFPV Its really interesting they do a good job, but MY GOD i've never heard so many compliments in my life. By the way huge fan of all your content! Im basically into exactly what you are with micros! It just turns out that every product you like is exactly what I want lol. I do fly DJI and analog so HD micro building has been challenging but I get a lot from your channel. My favorite is the mobigital from dax and one I built i put the alpha a75 board and motors (naked vista) on a emax nanohawk x frame with the nanohawk props. AMAZING for dji micro. You should really put that one on your channel. Sorry for the ramble. Thanks for all the great videos!

@NickBurnsFPV Год назад

@@stephankahlau6759 I might be confused are you talking about this one? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nSFaUcNsvL4.html