Nexa 3 HD // Best Overall 3 Incher // Smooth Performs Realiable

Подписаться 59 тыс.

Просмотров 11 тыс.

50% 1

My experience with AvantaQuads drones is always good. What is yours like?
Nexa 3 HD - bit.ly/31MXyXo
Nexa 3 Analog - bit.ly/3EGXZB6
Use coupon code "avant22n" for $10 and Free Shipping
🔥Daily FPV Gear🔥
► Goggles Orca FPV.One bit.ly/3eAgsBw 💣
► Charger SkyRC Q200 QUATTRO bit.ly/2KgUd8i
► Radio I use the Jumper T-Lite bit.ly/3ohjEXp
► Best Micro Batteries!! 💯 GNB 💯
Banggood bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) bit.ly/2ZsCob5
► Adhesive Welder amzn.to/2IpKKHj
► Emax tape bit.ly/3airvyv
► Same tape from Amazon amzn.to/3iJjTrT
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► Banggood - bit.ly/BG-NB
► RaceDayQuads - bit.ly/RDQ_NB
► AliExpress bit.ly/3vMbOZK
► GetFPV - bit.ly/3rnx05U
► Amazon - amzn.to/3iJjTrT
► Emax - bit.ly/3sn3AGm
► MakerFire - bit.ly/37TAmGo
► Heli-Nation - bit.ly/H-N-NB
► BetaFPV - bit.ly/BFPV-NB
► AirBladeUAV - bit.ly/ABUAV-NB
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon + Discord
► / nickburnsrc

Наука

Опубликовано:

9 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 154

@NATGEOANDSTUFFPaulbrannan 2 года назад

Great work nick.as always my friend stay safe

@HomeDronen 2 года назад

Awesome review Nick....Happy Holidays my friend! ⛄

@isaiahschell 2 года назад

I own the Vanta 2 Nano and the Ciro 4 LR, which are both fantastic quads. The build quality and flight characteristics really make them special.

@trajanfpv 2 года назад

Looks like a nice one. Great review Nick.

@Fang2555 2 года назад

I have the Avio 3.5 and I couldn't be happier, tuned excellently, super reliable, and theyre customer service is super responsive and all around amazing! Much better experience than when I was having difficulties with my Babyhawk 2 HD

@qpmkro 2 года назад

what problems did you have with the babyhawk 2 hd ?

@peteyfpv2217 2 года назад

i love my avio 3.5 i also couldnt be happier with this drone A+

@_Brando_69 2 года назад

Avant quads are super solid. Just fly it. Gonna grab one of these for sure

@mece66 2 года назад

Always top quality stuff from Avant! Can confirm, DHL is the fastest and most reliable shipping over here in Northern Europe too.

@scu-dub 2 года назад

Ok nick!!!! Lol you had me at the avant avio3.5!!!! Now you have me wanting this one as well 😁 I love the build quality and tune that they come with I am still flying analog 😔 I seen that they do offer this in analog however I am going to get some HD gogs in the very near future the image that this quad has with the nebula is amazing 👍 another great review ✌

@gmivisualsjason3729 2 года назад

Another excellent video thanks 😊 👍 😀 🙏 🙌 👏

@johnlheneghan1630 2 года назад

Nice quad, looks like it flys smooth

@InfinityLoops 2 года назад

Avant Quads knocks it out of the park again! They are such a solid company. And the customer service has always been top notch. I still fly their Kira 2.5" a lot.

@NickBurnsFPV 2 года назад

I do kinda miss the Kira. I gave that one away prematurely 🥲

@Soulsurferfpv 2 года назад

Great review Nick. I like all that I have seen and heard about Avant quads. Always good, but just out of my price range. I will have to just remain in quad envy of others for now 😁.

@johncarold 2 года назад

Hi Nick Great video and review of the Avanta quad Nexa3, Unfortunately I never owned a Avanta quad, but after 4 years of hearing about them, I never heard of a bad experience with them. I still only fly analog, and don't know if I ever will fly DJI system. 3in quads are my favorite size of quad, Thanks again for the video and information

@kNasty_ 2 года назад

Looks solid. If i were in the market i'd consider this for sure.

@ChrisParayno 2 года назад

So smooth

@orlinn3 День назад

I just bought the 2024 version of the Nexa 3 Evo with the t-motor 1604-3800kv, and wow! It's a ton of fun! There is tons of power, and it's my first "real drone" outside of 2 inches or smaller, so it's been fun adjusting to it. Also build quality is amazing and they respond fast to any questions that you may have. Also I used your avionrc discount code that you put in your nexa 3.5 video as the one in this video doesn't work, so thank you for that, sir. Oh, and I would love to maybe see a video on the 2024 Nexa 3 Evo so I can hear your own thoughts about it.

@tonypena1 2 года назад

I own a 3.5 Avio HD. sweet flyer . . Good quality . Coupons are available if you surf around

@MrPaulielie 2 года назад

Looking good 👍

@gustofpv4470 2 года назад

Awesome !!!

@willpowerfpv3246 2 года назад

My Avantquads Avio 3.5 HD is Far and Away the best sub 250 quad I own.. beautifully built and very well tuned. One of the few quads I don't want to Tinker with, out of fear that I will actually make it worse. Definitely not cheap, but we'll worth the price, especially compared to other bnf's. Also, Eddie from Avantquads was very helpful and quick to reply to inquiries. I forgot to use Nick's code when I bought it, so he threw in some extra arms, straps and propellers yo offset the discount. Would definitely check this out, if I were in the market for a 3".

@adampinkerton8091 2 года назад

Coming from a man who's probably flown everything in micro class, I appreciate you're slight bias😄 only recently acquired the V2 goggles and have been searching for a small hd quad, but just about everything in Australia is sold out or have the inferior camera's. So I purchased 1 through you're link. Hope it helps a little. Always enjoy the content and you're flying style. Merry Christmas 🎄⛄ to you and the family mate. Cheers🍻

@raast9835 2 года назад

What a screamer vanshee!....with 3inch at that weight

@MCsCreations 2 года назад

Pretty fantastic flying, Nick! Great review! 😃 I really liked that quad! I would say it's a step up from a toothpick... Don't you think? A bit heavier, but still lightweight, and the motors also a bit bigger. Anyway, they should make one 3.5" quad based in this one with 1505 motors! 😬 Stay safe there with your family! 🖖😊

@NickBurnsFPV 2 года назад

I am not sure of their plans but they have made 3.5 version based on prior 3inch designs.

@Fredd32 2 года назад

@@NickBurnsFPV do you think the nexa is the best 3 inch they make? Better than the avio? Thanks!

@NickBurnsFPV 2 года назад

@@Fredd32 its very possibly the most versatile of their 3inchers. That might make it the best.

@Adam_Carbone 2 года назад

This quad is pretty awesome with the aio board and air unit lite, pretty nice electronics setup! It is cool that even with that setup (without camera) that it is sub 250g as well! The 4m flight time is amazing given that higher throttle maneuvers that you were performing throughout the duration of the flight, very speedy and agile too and 8m-12m ish is also great for cruising, pretty efficient! The tune looks great on this quad, it looks like it is flying on rails. This is definitely a competitor with the 3.5in class because of its efficiency for the size. Thanks for your take on this quad, awesome flying, and nice video!

@SilverTopFlyer 2 года назад

Ohhhj yes she is a screamer honestly I love the full throttle stuff timestamp 23:42 for instance, I have been told my solo 3dr will fly acro no problem, I just can't imagine 3 pounds of aircraft doing that. I enjoyed a beautiful cinematic flight yesterday, solo is a beast.

@BonesFPV 2 года назад

I’ve built a handful of 4S 3” quads (all same frame) using different 14** motor variations. I have just ordered some BrotherHobby 1504.5’s to try for something different.

@PoodooDdoo4U 2 года назад

Avant kwads R dope! They rip full send all day or cruise pretty friggin good too, for you beginners that want something that'll take a crash well and keep trucking, they are built for a beating... Within reason of course. A couple bucks more than others but worth it. Get one of these and see for yourself. However, if a soldering iron makes you cringe, DJI will probably be more your speed.

@dropfile 2 года назад

I've discovered AQ from your videos, and I've got no complaints. My Avio flies great. The PID tune is excellent. It provides good authority and feels locked in. I replaced three arms and one motor. I love my quad. There are a few very **minor** issues. 1. VTX is slightly out of a channel when I use smart audio. The onboard button works well. 2. Shipping is slow. AQ uses very slow shipping for spare arms without batteries. 3. Pads on a flight controller are weak and small. There is no buzzer. I ruined the buzzer pad in my 1st attempt. I'm not a very bad solder. 4. I tried to contact support but got no answer Overall the quad is awesome. I enjoy it very much.

@NickBurnsFPV 2 года назад

I am not pleased to hear about #4. I am glad to hear of an overall good experience

@dropfile 2 года назад

@@NickBurnsFPV no problem, I just wanted some extra info, Probably they were swamped with more serious customer issues.

@Romanian_Productions 2 года назад

Nice quad

@lockingpaul 2 года назад

I rock run cam 5

@Rood6 2 года назад

I cut up bicycle tires and wrap them around my lipo's. It makes them slightly more resistant to impact and it creates a nice spot to put the battery lead!

@NickBurnsFPV 2 года назад

That would work, I just don't have spare tubes around :)

@michaelmatthews6421 2 года назад

🤩 will be looking into this. I'm an Emax fan. Never tried Avant. But it looks really good. Thanks Nick, now I got something for my income tax money to go to. Looks a lot more powerful than the babyhawk 2, which is my favorite atm

@NickBurnsFPV 2 года назад

Hopefully that tax refund is nice and large, quad and a steak dinner 😁

@michaelmatthews6421 2 года назад

@@NickBurnsFPV sounds like a plan 👍

@SpaceFaceFPV 2 года назад

This little beast looks like a blast to rip around! This is the kind of prebuilt I would be looking for once I get I to DJI digital goggles. I'm still flying analog tho 😜

@NickBurnsFPV 2 года назад

Analog is certainly fun as well, especially in micros we get that added performance from less weight

@SpaceFaceFPV 2 года назад

@@NickBurnsFPV that's so true! My latest build is a 3" with the mamba mk3.5 combo stack, and I was able to get everything including a pigtail for GPS/long range flights, and kept it under 245 grams! Thing flies like a little hawk it's so fun too. Deadcat frame. (iFlight DC3, meant for DJI actually, but I put an old runcam split 2 board in the back instead of the air unit)

@FL_Engineer 2 года назад

Looks like a great pick. You're killing me though; where's your rundown of the Smart 16?

@NickBurnsFPV 2 года назад

lol. All in due time. I don't rush or do one day reviews. :)

@InsaneClownFpv 2 года назад

Man I wish I didn't have to find a place to live I miss building drones ;(( I miss flying too!!

@NickBurnsFPV 2 года назад

Take care of life first. The hobby will wait for your return

@Porculus 2 месяца назад

Hey Nick! Thinking hard about pulling the trigger on the Nexa 3.0 or 3.5 in DJI O3 but I'm concerned about the props being in view of the camera. It's weird, because during your fast flying, the right prop is in frame, but not the left prop. And during your fast flight, I see no props in frame. Can you confirm? I want to use their Nexa for freestyle but I also want to shoot pro video with it. Will Giroflow get rid of the props in frame? Keep up the great work!

@NickBurnsFPV 2 месяца назад

The mount has two slots to move the camera back and forth but this does allow the camera to get slight askew which is what your noticing in the video. With video editing pretty much anything is possible, crop in and boom props are gone.

@MrMartinRome 2 года назад

Don’t have one of these but I am a fan of the JHEMCU GHF420AIO Flight Controller. I have a few of them and really like them.

@NickBurnsFPV 2 года назад

That company kinda came out of nowhere. And good they did 😄

@MrMartinRome 2 года назад

@@NickBurnsFPV And, you can get the 20amp version of that FC at Cyclone FPV for $40. I have had no problem with running it on a 3inch quads with 1404s and 4s. Very good build quality.

@ChrisParayno 2 года назад

Super cheap too

@bjimx 2 года назад

Hi Nick, I know this isn't the place for this comment but I was curious if you're going to review the GEPRC smart 16? It seems right up your alley being 2s and tiny I'm waiting for your review before I buy it. Thank you and have a Merry Christmas.

@NickBurnsFPV 2 года назад

Yes it will be coming up shortly. I take my time and don’t rush to please any algorithms. It feels like my counterparts are often competing to be first. When I happen to be first it generally means i have had it longer 🤣

@bjimx 2 года назад

@@NickBurnsFPV exactly, That's why I wait for your review I feel it's more thorough and honest.

@thorsten7868 2 года назад

Nick, still the same problem: EUROPEAN customers need these quads @Ali or @BG

@MCsCreations 2 года назад

Brazilian customers as well. 😕

@NickBurnsFPV 2 года назад

Avant doesn't ship to Europe?

@thorsten7868 2 года назад

@@NickBurnsFPV They do. But shipping is expensive and with DHL. EVERY DHL parcel will be hold and burdened by local customs.

@bertbeinaaf8314 2 года назад

@@thorsten7868 when i try to order one and ship it to the Netherlands, shipping is free. And thats without links or codes from Nick 🤔

@thorsten7868 2 года назад

@@bertbeinaaf8314 THIS time shipping is free, but problems and discussions with local customs stay...

@IanFitty 2 года назад

Just ordered a Nexa 3.5, super stoked! Needed something between micro and 5" for freestyling small to midsize spots with a go2. Curious how long it'll take to get here as I haven't had anything shipped from overseas before.

@NickBurnsFPV 2 года назад

I can't say for sure, it seems shipping is one of those 2 year struggles. I do believe they deliver dhl here in the states, I would think it would be pretty quick.

@jmillerfpv 2 года назад

Have you got it yet?

@IanFitty 2 года назад

@@jmillerfpv Yep! Took 10 days to arrive. Exports form China seem to happen in waves. afaik, When I ordered there was a covid incident in their province so it would've arrived a day or so earlier if conditions were ideal.

@Sp3ktral22 2 года назад

Nick, What are the colored flags for in the garden?

@NickBurnsFPV 2 года назад

They mark various utility lines in the ground. At some point we will have some construction work going on back there.

@daniel.pendzich 2 года назад

I get a lot of jello in my Insta360 go 2, how do you keep your footage so smooth?

@NickBurnsFPV 2 года назад

Are you processing it through the insta360 app? The app stabilizes the footage. Might also look for a firmware update to the camera.

@u250_fpv2 2 года назад

What do you think about the Gemfan 3016 Gemfan Props on this? Tried those recently because its used on some prebuilt Quads - wasn't happy compared to my favourite props: HQProp 3025. Hover throttle was way higher, motors were warmer and the props were screaming quite unpleasantly. I am using 1404 motors with 4600kv, too.

@NickBurnsFPV 2 года назад

Lower pitch props tend to handle prop wash better. I suspect from the symptoms you describe we need to do some tuning with the 3025 props.The higher pitch props will have greater performance in punch out type of situations, and likely grip better in turns.

@u250_fpv2 2 года назад

@@NickBurnsFPV Thanks for your reply. If you have HQProp 3025 on hand and this is interesting to you maybe you could compare on your quad. I have the feeling that the Gemfan 3016 are really nice on lightweight 3inch builds but not on the heavier ones with AUW (including battery) around 220-250g.

@NickBurnsFPV 2 года назад

@@u250_fpv2 I do think I have some higher pitched props I could try, getting comfortable time outside it more challenging these days. Try it eventually I shall :)

@TheKatLaRue 2 года назад

I have an avant avio 3, love it but I want to upgrade the camera, not a fan and the arms break at the motor screw holes often, I've changed many arms on that quad. Love flying it but definitely buy lots of extra arms. It's a love/hate relationship

@NickBurnsFPV 2 года назад

oh, dang. I didn't expect the arms to break at the screw holes.

@WayneOverbeck 2 года назад

I have a DJI Mini 2 and want to get into FPV for fun not for Video, I would like to stay under 250 grams, I ordered a Radiomaster ELRS zorro, and bought VelociDrone to get started. Would the analog version of this unit, with a ELRS receiver and analog goggles get me started or am I missing the big picture?

@NickBurnsFPV 2 года назад

That is the basics, we also need batteries and a charger. The hota d6 is a pretty well liked charger. Batteries vary, I use a lot of GNB, good price and performance.

@TheMard0 2 года назад

I wouldn't necessarily go to a larger motor to increase the performance. A prop with more pitch, something like the HQ 3x3x3, would probably be a nice improvement already. I always think that heavier builds do better with a more aggressive prop. And the 1404 motors should easily be able to spin them.

@NickBurnsFPV 2 года назад

Yes, increased pitch would increase punch performance. I was thinking like you more pitch but more motor as well, 1407, 1506. Push that higher pitched prop to max rpm quicker, get that rocket like take off :)

@TheMard0 2 года назад

@@NickBurnsFPV When it comes to power more is usually better. More prop and more motor sounds like a killer idea :P

@BallPingFpv 2 года назад

I just built a beast of a 3 inch with 1507 2800kv 5s BQE 3AF frame diatone 20x20 stack your favorite eachine nano vtx witch I am a fan of and radio master R81 receiver with gemfan 3052 props and caddx baby turtle hd board and on a warm day I get around 5 min of flight time.

@NickBurnsFPV 2 года назад

I bet the punches are ridiculous. To the moon? 💪

@JP-qq2kn 2 года назад

Great video as always! How would this quad or any new 3" quad compare to the Diatone GTR-349 from a few years ago?? Im pretty sure it was the best 3" at that time. It's a sub 250g race quad that can go over 90mph pretty easily.

@NickBurnsFPV 2 года назад

It would compare very well and in several ways outperform current day offerings. The downsides are bottom mount battery and no real external HD camera mounting options. Or squeezing in the dji/vista isn’t a purchase option. But analog to analog the 349 would outperform this and all modern day 3inchers.

@JP-qq2kn 2 года назад

@@NickBurnsFPV Ok thanks for the quick response! I have the 349 and really love it, I've added an hd split cam to it for decent HD video (but has jello) I think the insta360 go 2 or Caddx peanut could be attached to the canopy on top. But yea, not ideal I guess.

@ste_fpv6516 2 года назад

@@JP-qq2kn you can change the frame and you can have freestyle tipe flying

@JP-qq2kn 2 года назад

@@ste_fpv6516 Any suggestions on a frame? Preferably 4". I've looked into it but couldn't find anything that fit the 14mm motor mounting holes of the 1408 motor on the 349. So I just built a 4" freestyle drone out of my tyro79 parts instead.

@richardheedfpv9626 2 года назад

Still nothing beats the diatone. I have a GTM3 on 6s, a 349 and 369. Still fantastic.

@richardvanvliet6956 2 года назад

YEEEAH FINALLY 1ST! AND on what looks like another sweet quad from Avant! Hopefully not too late to ask Santa for one but from my previous experience zero issues. (yeah shipping is 👎but besides 🤟!)

@MCsCreations 2 года назад

Congrats! I guess. 😬

@propsoff 2 года назад

Hum? HD... I still gave you a thumbs up...👍🏻🍻👊🏻

@NickBurnsFPV 2 года назад

lol. There is an analog option :)

@propsoff 2 года назад

@@NickBurnsFPV Haha! Your the man...🍻

@leadslinger5130 2 года назад

I liked my bind and fly ciro 3 from Avant, but i tried to build there soko 3 frame + 4 spare arms and the arms did not lock together very well i could not find any combination of the 8 arms i have the fit tighter then a 1.5 mm gap. this caused the quad to runaway on 4s. there bind and fly was very nice but the soko frame is not great. i will say i did not reach out to avant i just bought a impulse rc frame and all was good. so im 50/50 on avant the ciro 3 fly great and haven't had any issues with it.

@NickBurnsFPV 2 года назад

I wonder by chance are all the arms the same? All front or all back?

@leadslinger5130 2 года назад

@@NickBurnsFPV as far as I could tell they where all the same. They where not labeled front or back. It possible but i tried almost every combination even opened the spare set to see if I could find a few that would fit better. It may not have been a issue except I had fairly aggressive 1507 4150kv motors on it on 4s it just went crazy. I tried trouble shooting for about 2 weeks thinking maybe I hand bad betaflight settings or a bad FC. Maybe I missed something could have been to hot of motors I rebuilt with a different frame and 3800kv motors and had no problems so its possible it was a mix of both the frame and the motors not sure but it was a head scratcher for sure.

@leadslinger5130 2 года назад

@@NickBurnsFPV I guise that's possible, but there is no option to purchase front or back arms. Only set of 2 or set of 4. One thing I noticed was the parts where already chamfered and the area where the 4 arms lock together was also chamfered. I'm thinking its possible when that was done it change the detentions slightly or something. Other than that the frame was well laid out it would have been easier to service theflight stack compared to my impulseRc frame.

@EbrFPV 2 года назад

Betaflight 4.2.11? Are you sire about that Nick?

@NickBurnsFPV 2 года назад

Your right 4.2.10, read from the website rather than my notes. :(

@jmillerfpv 2 года назад

What battery do you recommend for the 3.5 inch nexa? Turnigy nano tech 850 good?

@NickBurnsFPV 2 года назад

I generally use gnb batteries. hobby king batteries are so so, until you find a good one. a 4s 850mah would be what I fly, but we could do 1000mah or even 1100mah as well.

@jmillerfpv 2 года назад

@@NickBurnsFPV would 4s 750mah be under powered?

@NickBurnsFPV 2 года назад

@@jmillerfpv That will work well as long as its a decent battery.

@jmillerfpv 2 года назад

@@NickBurnsFPV Thank you for taking the time to answer questions for me everybody else!

@jacobosannicolas3884 2 года назад

I do own two quads from Avantquad. The Avio 3 inch is the best quad I have ever had. I've tuned it following RU-vid UAV tech video which is great. Then I have an Avio 3.5 too. This one is not good at all . It os fragile arms break up . I still have to tune that one.

@NickBurnsFPV 2 года назад

Are these frames you have built or bnf?

@liv2runrun2liv 2 года назад

Is there anything that really separates this from the avio other than having room for 2 stacks?

@liv2runrun2liv 2 года назад

And the top mounted battery

@NickBurnsFPV 2 года назад

arm layout is wider so more freestyle type of frame with less to no props in view.

@jebrc 2 года назад

Sadly ive never had one however i have never seen or heard anything bad about them.

@johnlocke62 2 года назад

How is this versus the emax babyhawk 2 HD?

@NickBurnsFPV 2 года назад

babyhawk 2 is 3.5inch prop, I don't put it in the 3inch prop category. The BH2 has more power but also less smooth. With the additional power it has a tendency to feel "jumpy" vs this nexa 3.

@johnlocke62 2 года назад

@@NickBurnsFPV thank you Nick!

@makesomemore_ 2 года назад

DHL doesn't ship to po boxes, that might be a downside for some

@NickBurnsFPV 2 года назад

That is something I had not thought about. Curious why that is.

@darkmann12 2 года назад

Would love to see them shipped with stubby antennas by default tbh

@NickBurnsFPV 2 года назад

There is a balance, stubby antenna will have somewhat degraded signal when the better is between the antenna and us. I also tend to have an issue with stubby antenna taking damage, vs the longer with flexible stem tend to bend and 'roll' with the crash.

@palethiusfpv 2 года назад

I still fly 1507/1408 motors on my 3” apex. I know it’s a different quad, but the power is there for sure. Almost too much power. I have to throw a motor output limit on it. The biggest reason I still use those “old” motors is because of the 5mm shaft and prop nut. I hates t-mount props. HATES them. They are soooo fiddly and take forever to change. Having to find the right screws for the props/motor is another annoyance. Different screws for different props. No thanks. Besides, I’m way too impatient to change props and deal with the screws and what not. I don’t even like taking the time to change 5mm shaft props… but it’s still a lot easier and faster. Lol.

@NickBurnsFPV 2 года назад

5mm! Dang as soon as I read your commment my mind flashed back to the video…pretty sure I kept saying 3mm shaft 🤦‍♂️. I do hope we see a return or options back to those traditional or “old” 3 inch motors

@palethiusfpv 2 года назад

@@NickBurnsFPV I really like the new motor sizes, but I can’t stand the prop mounting. I’d love it if they just offered prop nut options. However, I guess I understand the reasoning. It does reduce weight, efficiency and maybe even spin-up speed… but it also adds complication/annoyance. Maybe we will see a switch back to prop nuts in the future. Many things we use in daily life win out because of ease-of-use rather than pure performance. 🤷‍♂️

@kenb6565 2 года назад

Check out fpvcycle 16mm motor....might be perfect.

@palethiusfpv 2 года назад

@@kenb6565 I’m wary of fpv cycle stuff because of stock issues. I’m sure it’s awesome, it if I need something, I need it yesterday. Lol.

@kenb6565 2 года назад

@@palethiusfpv I get that, v1 of the imperial motor was iffy at best. The new stuff seems good. I like his efforts and his attitude. Out of stock is problem for him and everyone. It seems to me to be one of the few 3.5" motors out there. I also fly at 4500' so need a touch more kv than most. Happy flying!

@jhughes2286 2 года назад

264 grams, that's a lot of weight for 3 inch props. I think a 650mah would be a better pairing, a regular old 14.8v 650mah from RDQ 80 grams. They are amazing if you haven't tried them great punch , very little sag, not like the new lightweight style, 650-1100 mah or so, HV lipos that sag like crazy.

@NickBurnsFPV 2 года назад

I wonder if I have those batteries no not. I will have to dig through.

@pirateradioFPV 2 года назад

How dare they make anything but a cinewhoop in 3" ^^ . . looks like it has 3,5mm arms which is even more than the 1mm/1" that I aim for. Personally I've burned a full set of motors and two AIOs just clipping stuff, so without the prop guards the 4in1 is the way to go to me. I'm sure it's just me :P

@HendrixFreakazoid 2 года назад

I seem to always find my camera by stepping on it

@NickBurnsFPV 2 года назад

Yea these little quads and the cameras can easily get under foot. Walk softly through the grass.

@jonathanmcwhorter1353 2 года назад

and to think.. I thought I had the overall best 3 incher.. hehehe

@925fpv 2 года назад

Durability is questionable. I've had two destroyed in minor crashes.

@NickBurnsFPV 2 года назад

Which ones? Did avant replace the damaged parts?

@lorentacar 2 года назад

Caddx Peanut is heavier... than go 2

@NickBurnsFPV 2 года назад

Really. I thought the peanuts advantage was lower weight. go2 on my scale is 28grams.

@lorentacar 2 года назад

@@NickBurnsFPV the peanuts advantage is lower price mainly. But they say it is also more robuste... but in my opinion no cause it has the disadvantages not to be waterproof... I thing the weight different was 1 or 2 grams

@NickBurnsFPV 2 года назад

@@lorentacar Good info, Thank you

@lorentacar 2 года назад

@@NickBurnsFPV I double checked the peanut is really bigger but just 0,8g heavier on my scale(go2 is 26,8g and peanut 27,6g).👍🏾 thank you for your work

@bestfield372 11 месяцев назад

Been looking at nexa 3.5 HD and free shipment now There not must info on their site puts me off a bit this is my first qurd. Apart from Avata avata doesn't like freestyle

@NickBurnsFPV 11 месяцев назад

The company ran into some payment issues that essentially took them down for a good long while. For whatever reason they are establishing their business under a new domain avionrc.com