Nilight E4S - The SMALLEST LED Headlight Upgrade Tested! 

Review and test of the Nilight E4S LED headlight...the SMALLESR LED headlight upgrade that I have tested so far. But is it good for your application? ★ Buy on Amazon: geni.us/nilighte4s ★ Nilight Amazon Storefront: geni.us/nilight ★ Nilight Direct: geni.us/nilightdirect - 5% off coupon code: carlightreviews ❤ Support future LED Review videos and get perks! geni.us/joinclr

I’m interested in seeing how the Sylvania LEDs hold up. Being one of the leaders in automotive light bulbs I’d think they’d know how to make an LED bulb. Please review them

Test Boslla Nd 180 W please thank you

how about Novsight N63 9005?looks same with this..

yes, it's much cooler than halogen but do mind solid state components doesn't like heat. most big brand chip manufacturer rated their longevity at 80C so yeah, running it at near its TjMax will burn the chip sooner than its life expectancy. if you want sharp cutoff on reflector housing, you need a small emitter like what's used on Morimoto 2 stroke or Philips ultinon pro series. you might came across with Luxeon Z ES from older retrofit products. this chips is only 3W max. each (usually came with 3 chips per side, 18W per bulb) but they perform better than this big 3570 emitter type on reflector. i usually recommend those Z ES based LEDs for anyone who uses reflector. projector is much more forgiving but they need high output source like 30W+ LEDs

Awesome video as wlways! I'm not sure if it's doable on your end but to see if you can test lights under DRL settings (I know there are different types which can be challenging) to see if LED lights can actually DIM rather than flicker or not run well. The only bulb that pops up from Google that does well in that is Morimoto 2STROKE 3.0.

Can you test some of these new lights that have a built in projector lens like h4 or h7 been wondering about these

hi, can you do some 3000k bulbs?

I can see this being perfect for high beam use. High beams sre typically only used a few minutes at time. And many high beams have tighter fitment than lows. I can see this being perfect for 09-current 4th gen rams with the quad halogen or the projector housings where the high beams have nearly no room for most led bulbs.

Do you have any video reviews on the Forenner Fahren H11 or the MOTOBEE H11? I bought thr MOTOBEE for a Suburban amd the Forenner Fahren for a projector headlight on a semi. I tried them both in the 2014 suburban. I feel the MOTOBEE does better in it. I haven't got to install them in my semi yet. I was curious of your opinion on them. Thank ya sir for making these videos it helps guys like me who are budget spenders lol. God Bless

Great and very informative video as always. Would you please consider offering a testing comparison for the dual beam led bulbs. I have a car that uses h13’s and feel like they come up with different beam patterns and brightness. The chip sizes make up some of the difference too. I guess that would make sense when adding more variables but I feel like it would be interesting to see. Thanks!

Damn only 64% after 25 min thats not too good

Holy crap. That is the hottest all in one, perfect size halogen bulb type led bulb that’s almost 300 degrees Fahrenheit. Back then. I use to think that Auxito Q16 has the hottest one for 168 degrees Fahrenheit. But compare to the newer all in one led bulbs. It’s not even that bad. And Q16 is a monster, more wattage, it has a big ass cooling fan that does better job. This nilight led bulb is ridiculously hot. For the price, the performance of the led bulbs, the retention, it is not worth the money. I prefer Auxito M3 and Q16 over that thing. The longevity of that led bulb will not last for that temperature. Not worth the money.

Thank you for the review! I'm in the very tight space between my dust cap group. Does anyone make a LED Headlight that is super slim and has an external driver? I'll be sure to use your affiliate link when I make my purchase! If you're up for adding another category to your spreadsheet it'd be nice to know the collar tab to back of fan depth on headlights or at least adding the word slim to the test notes. I'm curious how other slim all in one models would stack up against the E4S. Like the Lastfit LCAir and the Novsight N63!

Are H11 and H9 the same in LEDs? I replaced my low beam halogen projectors with H11 LEDs on my Kawasaki ZX14R and I’m needing to replace my H9 high beam halogens. I thought the only reason the halogen high beams throw farther is because they have more power and the tip of the bulb isn’t covered in that dip they use on the glass on H11. Are the projector housings different between high and low beam also to give the extra throw?

Please test PSX24W LEDs. This is the size used in a lot of fog lights.

Can you test the hikari core 12 leds

I have a Kia Optima 2016 i need 9005/HB3 headlights bulbs for my high beam, those use reflectors on my car. What you recommend better Novsight N60 or Fahren Termitor, i want them really bright...!!! What you recommend? I want no error code

Can you please help me choose the best led for my car? I have a mercedes slk200 r171 from 2009 with halogens. I have no price limit for the lights. Which ones should i get ? I have h7 i want a quality product

I think it'd be good as a high beam bulb given its poor brightness over time Have you seen the Bulbtek X6? I commented on another video I thought was your latest but I was wrong. It's a really interesting bulb, its projector only and has this weird triangle arrangement for the LEDs so there's no dim spot like most of these LEDs. I returned mine though as I deemed them too bright for regular use

Hey can you try the auxbeam gx ultra they have some crazy specs like 240 watts each and double the Lux of the regular gx

Hope yoy can review Keon sondra bro

Is there a reason you still haven't tested any of the morimoto bulbs? from all i've seen of them they compete in the top three based on others tests. would like to see you test them as you go a little more in-depth

So i bought a combo of 9005 and h11 of the exact lights, The h11 for my fog lights lasted about 3 months before one side of the bulb failed, the 9005 are going strong till now. In a reflector, I had the same problem of scatter on the cutoff line so people would flash me regardless of how much i adjusted the beam and height. (for my fog lights). However LUXTER iv had for 6 months now and I love them still as strong in brightness as day 1 (Used for low beam).

Please test X7SEVEN Zeus 150W! I think that's the top 4 brightest!

What about led fog light? It will be interesting if you test how the on coming vehicle see these LED headlights.

Test new Novsigt N70

Do you sell the bulbs after you test them?

These look exactly like a rebranded LAair set from Lasfit that I just sent back even the exact same packaging interesting

Thank you for the review. Though not a great performer it is one step into the right direction and the little dead zone in the projection headlight is a great plus when driving in fog condition. For those who are tired of changing their halogen bulbs frequently at extreme tight space and have very little room in their enclosed small housing (eg. SMArt car) this design is still an excellent option at great price consider how much longer LED would outlast the halogen bulbs. Based on the design showing I could not help but wondering if an adding a second small fan below the driver by extending the connection stamp may yield a much better result but the noise may go up a bit. Thanks again for the review.

Thanks for all the great work. Keep it up. Hope your content is helpful to us guys who like to DIY.

Nice!!!

First one here!

Thank you for all the time you take to review these bulbs.

Second!