All Auxito LED Headlights Reviewed and Lux Tested

Подписаться 12 тыс.

Просмотров 154 тыс.

50% 1

I review and test ALL Auxito LED headlights available...with unboxing, overview and actual tests with a lux meter. Which one should you buy? I'll help you decide!
★ Auxito on Amazon: geni.us/Auxito
★ Auxito deals on eBay:geni.us/auxitoebay
★ Auxito on AliExpress: geni.us/auxitoax
★ Buy Direct: geni.us/AuxitoDirect (use coupon code CARLIGHTREVIEWS for discount!) ★
⬇ Quick jump to each section ⬇
0:00 - Introduction
1:34 - How I test
2:26 - See important notes at the bottom of the video description
2:43 - Auxito 10S unboxing and specifications
3:30 - Auxito 10S test results
4:53 - Auxito B3 unboxing and specifications
5:43 - Auxito B3 test results
7:14 - Auxito M3 unboxing and specifications
8:00 - Auxito M3 test results
9:38 - Auxito Q16 unboxing and specifications
10:45 - Auxito Q16 test results
12:29 - Auxito Y13 unboxing and specifications
13:37 - Auxito Y13 test results
15:31 - My opinion on which ones you should buy...and which one you shouldn't.
19:26 - Final thoughts, where to buy, discount codes, how to support this channel.
❤️ Support future LED Review videos: / carlightreviews
▬ Reference Links ▬
📊 Headlights specs and results spreadsheet: carlightreviews.com/headlight...
⚠️ My previous LED light tests on my other channel:
• InJasonsGarage Automot...
➡️ List of items I use to do my LED headlight testing ⬅️
TekPower TP30SWV Power Supply - geni.us/TekPower
Dr.meter LX1010B Lux Meter - geni.us/LuxMeter
Amazon Basics Lightweight Tripod - geni.us/AmazonBasicsTripod
H11 Wiring Harness Socket - geni.us/H11WiringHarness
Toyota Camry Headlight - geni.us/CamryHeadlight
Ford F-150 Headlight - geni.us/F150Headlight
➤ Subscribe: bit.ly/CLRsub
➤ If you want to see everything that I recommend on Amazon, I made it easy for you:
bit.ly/jasonsrecommendations
➤ Looking for Corvette lighting upgrades? Use this special link to get 10% off Corvette lighting from Vette-Lights: bit.ly/vette-lights-discount
(Discount applies in at checkout)
➤ Want 15% off Lamin-X Automotive Light Film Covers & Paint Protection Products? Use this link! bit.ly/laminxdiscount
▬ ABOUT CAR LIGHT REVIEWS ▬
I am Jason, your host and amateur mad scientist. 😉 I started this channel as a spinoff of another one, injasonsgarage.com. I have been a car enthusiast since the age of 2. From watching professional drag racing to bracket racing myself and being involved in significant projects with the Chevrolet Camaro and automotive agencies, cars are my life.
▬ AFFILIATE/ADVERTISER DISCLOSURE ▬
My videos serve to entertain and educate car and garage enthusiasts, often through informative and honest product reviews and recommendations. My videos and descriptions will often contain affiliate links, which means I may earn a small commission on a purchase you make by clicking on them (at no extra cost to you, and sometimes I will help you save money).
Any opinions expressed are 100% my own. I retain full editorial control over the content in my videos and will never make a false recommendation as a result of any form of compensation.
If you do purchase through my affiliate links, I thank you so much for your support as it allows me to continue to make helpful and entertaining videos for your enjoyment.
▬ A NOTE ON USING LED LIGHTS AS HALOGEN BULB REPLACEMENTS ▬
Check the aim of your headlights at least once a year and always after replacing the bulbs.
If you install an LED and the cutoff is bad or you can’t aim them accurately or the light output scatters too much, it is not safe to use. Try a different style of LED or one with a lower output that will be more compatible with your light housing. See my other videos for more reviews.
When I use the word “headlights”, I am referring to legal off-road use or fog light use only as replacing factory halogen bulbs with LEDs for headlights in the US is not currently legal nor a DOT approved practice. This video is only for informational purposes for using LED lights legally. Check your local laws and regulations.
▬ WARNING - DON’T DO ANYTHING DUMB ▬
Standard disclaimers apply. This video is for entertainment and educational purposes only. I assume no responsibility for any damage to watching my videos. Please be careful - the consequences of a mistake could be disastrous.
#carlightreviews #auxito #led

Авто/Мото

Опубликовано:

28 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 375

@TheZobi8520z 2 года назад

Man, this is amazing, so much work and detail. Love the spreadsheet to compare too. Will definitely buy some stuff using your links!

@CarLightReviews 2 года назад

Much appreciated!

@hybridamericandude3575 Год назад

I was so stumped which headlight to use. So I took your advice and popped in some Y13’s in my my 2013 Chevy Volt. I’m shocked how great they are. Such a huge vision difference over stock. Don’t hear fan noise inside the car. I appreciate all the work you done to help me make a decision! Thank you very much.

@CarLightReviews Год назад

Glad I could help! Feel free to hit that THANKS button on any video!

@mccartanaaron Месяц назад

AWESOME CHANNEL. Started by searching a couple items and ended up culling your spreadsheet for a long time. This demystifies the entire field. Really appreciate the info!

@shawnfahy6365 Год назад

THIS is how you do test reviews. BRAVO AND THANK YOU! Having to spend hours online doing research and cross-referencing and comparing... you made it a LOT easier and saved time in my life. Thank you!

@CarLightReviews Год назад

Thanks so much, Shawn! Glad it helped you out! Be sure to check out my other videos, I am making new ones all the time. And if you find value in my work, be sure to hit that THANKS icon here on this video! I'd really appreciate it! 😊

@yongutsa 2 года назад

wow so professional; huge admiration; keep up with the great work!

@CarLightReviews 2 года назад

Thank you! Will do!

@darkknightstacker5420 Год назад

Wow what a great review with tons of specs which is much appreciated! Thank you!

@CarLightReviews Год назад

Thanks! Glad it was helpful.

@Mr.Worf63 2 года назад

I’ve had the Y13s in my 2016 Elantra GT for 2 years, H11 & H7 ( Highbeam / DRL ) Awesome bulbs that I can put on both my dust covers.

@luisinhoens90 2 года назад

This is the scientific test I was looking for. Lumens don't mean anything when driving on a dark road, but luxes do and performance over extended driving are equally as important. Thanks

@CarLightReviews 2 года назад

You're welcome!

@armandoramos1949 Год назад

Thank you for this very informative reviews. More power to you and your channel.

@CarLightReviews Год назад

Much appreciated!

@eastbaykilla4121 6 месяцев назад

Thank you so much, this video is so thorough and really helped me in researching new bulbs. Cheers!

@CarLightReviews 6 месяцев назад

Glad it was helpful!

@thebonafidebeasley Год назад

Hello, and thank you for the great in-depth review! I just replaced all four of my headlight bulbs with halogens after one of the low-beam bulbs burned out. Since I needed to take care of it right away, I didn't have time to review LED bulbs, but did that aftter the replacement. I ended up ordering Auxito replacement bulbs for all the interior and exterior, and expect the order to arrive today. I noticed that of all five of the lights you reviewed, only one was fanless. I'm still learning a lot about the different options, and wanted to get your feedback on pros and cons of having a fanless unit. Unfortunately, I didn't come across your review until today. If I had seen it sooner, I would have asked this question before placing my order. Hopefully, fanless LEDs are just as good and reliable as fanned units. Thanks, and I look foward to your reply!

@Finite-Tuning 2 года назад

Thanks for such an in-depth review. Those like me need the technical information.... Cheers 🍻

@CarLightReviews 2 года назад

Thanks! Glad you found it helpful!

@xItzEpicDx Год назад

May 2022 I bought the Q16’s, just seeing your channel today after clicking through some videos to solve hyper flashing on LED Turn Signals and thought I’d see if my research served me well. Your Q16’s looked different than mine, so I went to check n see what I ordered, guessing the H4 vs H11 is probably the main difference but seems a 2022 updated version (H4/9003) with a different fan style and driver exists now. Curious if the change may have impacted its performance. Auxito seems to be a great company so far. In my Sequoia, as most Toyotas of similar age seem to have issues upgrading to LED’s where there is hyper flashing or no working fog lights issues, at no additional cost they sent out the harness for each light to correct the problem. I’ll be Subscribing after watching this single video, watching for similar content in the future. Well done, and thank you.

@CarLightReviews Год назад

Thanks for the comment and for watching!

@samhersir Год назад

The Auxito H7 works amazing in a factory volkswagen golf mk4 generation headlight assemblies

@jasmohi 7 месяцев назад

Thanks a lot It was soo helpful for me to buy Really geat video 😍

@CarLightReviews 6 месяцев назад

Thanks for the comment. I am glad this video helped!

@UnoDay3400 7 месяцев назад

These are literally the best led headlights, got some for my 2010 Armada

@altimatic2183 2 года назад

Fantastic video!

@CarLightReviews 2 года назад

Thank you very much!

@mikegentzke6424 2 года назад

Really impressed with the details. I’d love to see a comparison of Auxito vs Diode Dynamics.

@CarLightReviews Год назад

I can tell you that the Diode Dynamics is not going to be as bright as many of the offerings out there, but there is also nothing that compares in terms of quality and engineering. The DD SL1 is the closest thing to OEM that you can get for an aftermarket LED headlight upgrade. I made a couple of videos about them on my other channel with slightly different testing methods: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6QPalSfnDZY.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-h3AC_MOGiK4.html

@MUSTAF_AROD_UPYUR_POUPR Год назад

I’ve been using the Y13 in my fog housing for my 03 f150 that’s reflector. Pattern + luminosity are perfect and they’ve held up through 2-3 MN winters no problem.

@CarLightReviews Год назад

As mentioned, I have been using the Y13 for almost 3 years now in one of my vehicles. Still working great. I have tested MANY lights since than that could be considered better, but despite the test results, they still perform just fine.

@GeadheadNV 2 года назад

The dark spot at the bottom of the beam pattern is because the output isn't actually 360* as claimed. There is a dead spot from the board/heat sink. If you rotate the bulb 90* the pattern will change. On my headlights the plug sits about 5 o'clock so the pattern gets really distorted with the fixed tabs.

@AK-ny5bz Год назад

That weak spot/shadow is due to light blocked by the central stalk making it Non-360 degree light source. Brighter ones make the shadow look worst because it looks more contrast compared to the brightest spot

@BoopSnoot 2 года назад

I bet the Q16 would be great in a headlight that has a separate highbeam projector, as you don't usually run those for all that long, and you don't usually have weak spots in highbeam projectors.

@CarLightReviews 2 года назад

Good call!

@jaymartin322 7 месяцев назад

I just wanted to come on here after a year later and say you were right on this ! I got the q16s but ended up with y19s beam pattern is perfect on my 14 accord sport no weak spots good catch!

@cliffordsawyer2994 2 года назад

Ordered the M3s for my 16 ram zero issues with the projectors (high beam) extremely bright, my (sea light) fogs cover in the lower area so the entire front of my truck is a giant light , love them

@CarLightReviews 2 года назад

Cool, glad the vid helped!

@TCSheepdog44 Год назад

GREAT JOB!! I’d like to see you add a part where you shoe how the bulbs look while they’re on if you’re lining at the housing. Do they give a full bulb look or do they look like Cat/Snake eyes. I know it might be challenging to do since most of the lights are very bright. Also, I know you mentioned the general OEM temp around the middle of the video, but if you could try to mention it in the beginning when you mention the OEM output, that’s be great. Either way IMPRESSIVE REVIEW!!! Thanks for taking your time to put it together!!

@CarLightReviews Год назад

Thanks for the suggestions. Much appreciated!

@jayb150 Год назад

Excellent video, thank you.

@CarLightReviews Год назад

You are welcome!

@BoondyIsOn 2 года назад

I actually got Auxito M4 for a customer's car and I noticed how bright it was. So I did a search and found your video, so now I bought the Y13 for my personal vehicle thanks to you. Can't wait to try it.

@CarLightReviews 2 года назад

Glad you found this video helpful! Let me know what you think of the Y13 when you get it.

@BoondyIsOn 2 года назад

Hey dude, I'm back to give you my thoughts. I installed the Y13 and ALMOST instantly I noticed they were the brightest LED's I have tried (2013 corolla hatch / projector type headlights). I did some driving around for testing and confirmed these are slightly brighter than the 55w HID setup I used to have a few years back and the last pear I had (NOVSIGHT 50W 12000LM/Pair LED's). However they weren't as bright as the Auxito M4 (2010 Corolla Sedan/diamond type headlights) I believe this is due to the diamond style headlights. When I find some time I would like to try adjust the bulb sitting location for optimum performance. Anyway, I'm still happy with the purchase. These are the brightest bulbs I have tried, even though only by a small margin in still happy. Thanks again.

@dilldowschwagginz2674 Год назад

Just ordered a set for my 2017 Malibu. I'll be replacing halogen factory units but auxito swears that they're plug and play... Thoughts?

@BoondyIsOn Год назад

@@dilldowschwagginz2674 they were plug and play for the 2 vehicles I tested on. Enjoy👍

@CarLightReviews Год назад

@@dilldowschwagginz2674 Usually yes they are plug and play.

@jettangeles2707 2 года назад

I’ve had the Y13 on my 2016 Dodge Charger and it’s been amazing!

@CarLightReviews 2 года назад

Glad to hear. How long have you have them installed?

@AI_Surfer 4 месяца назад

The Y13 is a great light. It has a great beam projection, with virtually no dark spots in the front of the car. It's small and light in weight, and slips into the headlight socket effortlessly. I've had a pair in my car for nearly 4 years and they're still going strong. I just wish Auxito would update the light by keeping the design, but upping the lumens. Even if you are not running the Y13s, I would recommend them as a spare set to keep in the car just in case something happens to your installed lights.

@crs1474 Год назад

Great review. An observation on the Q16: it IS adjustable. There’s a small Phillips screw that’s visible and the collar/ring does move. Curious if the cutoff and spread would be better on your test if it was properly clocked. Question on the Y13: was the bulb clocked to 9/3 o’clock? I did on my projector equipped headlight on these Y13 bulbs and the difference was pretty dramatic on the hotspot size. The properly clocked setup being better.

@toyotabrony 6 месяцев назад

Ur right. I can see that little black screw on the Q16. For low beams, that is adjustable. But definitely they don’t have adjustable collar for high beams

@toyotabrony 6 месяцев назад

But ur talking about the H11 size or the 9005 that has adjustable color screw?

@crs1474 6 месяцев назад

@@toyotabrony i think you’re right.

@toyotabrony 6 месяцев назад

@@crs1474 if u have 9005 auxito - Q16, would u be able to get the chance to inspect ur high beam led bulbs, and see if u manage to get them adjust just by testing it? When I looked at the image, the collar looks like it’s blowing half of the center of the Philips screw.

@dastrangle 11 месяцев назад

I bought the Q16 after seeing your test results. To me it seemed to have a good mix of attributes.. high output, low noise, all in one form factor, decent energy usage, and the thing that pushed it over the line for me was they were on sale for 24usd shipped. The biggest problem with the Q16 was that it hit 76 degrees C. which is not that hot, but hot enough to drop the output by 30%. so I made a plan to order some upgrade parts at the same time I bought the LEDs. When it all arrived, I opened up the LED housing using a triangle bit, used some IPA to clean off all the stock thermal paste.. which I have to say was hilariously sparse and inconsistently applied. Added my own ceramic thermal paste which I chose for it's longevity, resistance to pump out and drying, ease of application, and cheap price. However, it's performance at heat transfer is good but nothing special.. probably as good or slightly better than the stock thermal paste if it was applied properly lol. I then added a 28mm x 28mm x 15mm heatsink to the back of the LED housing with some thermal glue.. by luck I had ordered the exact right length/width to fit it perfectly. My car doesn't use a dust cap but it's still fairly cramped in there.. it fit well but could have maybe went 28x28x25 at most. Anyway it all worked out great. light output is very good, the heat transfers into the heatsink excellently. overall hope my mods allow it to stay cooler and in turn stay brighter and last longer.

@CarLightReviews 11 месяцев назад

Pretty cool hack!

@stephenbrown5844 3 месяца назад

Thank you for your help my friend very much appreciated 😊👌🇬🇧

@CarLightReviews 3 месяца назад

No problem 👍

@jonmanilenio Год назад

You should be testing at 10 meters (32.8 ft) for lux. It should get at least 15,000 candela or better. Nice review though. I'd say the M3 and the Y13 are more or less equal but for different applications; the M3 for reflectors, and the Y13 for the projectors. And since I'm planning to replace the halogens in my hb3/9005 low beam, you just solved my problem of which one to get. Thank you!

@K_N_44 Год назад

What would you recommend...Auxito or Novsight? I'm more on Auxito side because the quality looks better but any opinions would be very helpful...

@d-one-and-only 2 месяца назад

@Car Light Reviews ... would the Q16's (H11's) fit a C6 fog light and projector hi beam ? i do need the fog lights to be a tad brighter than the h10's and was wondering if they would fit .... 168 deg f is still way less than the temperature of the stock fog halogen no ? Great reviews ...keep them coming!

@bb-ob5cc Год назад

I wish I can give million likes for your effort , thank you

@CarLightReviews Год назад

Thanks so much! Glad you like my videos!

@Hooliganth_ Год назад

I never seen a video of yours until now. And i love it i can tell you put a effort on the video making. Keep it up, new sub

@CarLightReviews Год назад

Thanks SO much! It is comments like this that really makes me happy, and keeps me going! Don't forget to hit that THANKS icon if you found value in this video!

@robbigemon1868 6 месяцев назад

Have you done any review for 9003/h4

@iamjaccu5905 Год назад

Can you also do a all novsight review?

@jomac21 3 месяца назад

hello.. can you review some newer versions of auxito led lights in h7 and hb3? thank you..

@SimarBhamra 3 месяца назад

Hi, great video. Would still recommend Auxito Y13 in 2024? In the video, looks like Y13 does not have a very evident hotspot, is it due to close enough design to a halogen?

@the_original_destroyer34r 2 года назад

Ip ratings are read as individual numbers. Fist and second numbers mean different things. First is dirt and debris protection and second is water protection

@GANGSTER-TRUMP2024 Год назад

Once again that Auxito 2 LED review was awesome and very helpful. I have a 2008 Acura MDX, a few years ago I had a pair of H11 LED 8000K Fog lights installed; which are connected to some sort of ballast. Question: I am aware that my DRL presently have 9005 Halogen bulbs, but is it possible for me to switch over that same fog light installation and reconnect it to my original Daytime Running lights connection? Please let me kono ASAP if that can be done? Thank you sir.

@CarLightReviews Год назад

This one I am not sure I can help you with. Are we talking about headlights or fog lights?

@BornToSneeze 7 месяцев назад

Damn... great job, dude.

@CarLightReviews 7 месяцев назад

Thanks! Check out my other videos on this channel, they are just as good!

@terrencecollins8080 Год назад

Love the video! I just bought the Auxito B3F yellow Fog Lights before I saw your video, is there a better yellow Auxito fog light bulb for a 2018 Nissan Rogue SL? Thanks

@toyotabrony 6 месяцев назад

They have Auxito - i9 yellow led fanless fog lights. Very similar to the Y13.

@hunterdan2002 2 года назад

I bought the y13 based on your reviews and found exactly what you did. More scattered in my reflectors than I'd like. Currently running a set of fahrens that serm to have a beam closer to stock, but it seems like they fade out after a while. Great video though!

@CarLightReviews 2 года назад

Do they fade out over time, like in my 27 minute test or they just aren't as bright as they used to be, all the way around?

@hunterdan2002 2 года назад

@@CarLightReviews they seem to fade out in time. My commute is right around the 25/30 minute mark and right at about 10/15 mins they seem to get noticeably dimmer. The bulbs I'm running are h11, fahren Krieges. They were noticeably brighter/better pattern than the y13 in my ram reflectors, but like I said they seem to get noticeably dimmer.

@MasterSumai Год назад

@@hunterdan2002 the problem is the RAM! LOL! 😅

@hunterdan2002 Год назад

@@MasterSumai yeah, sure... The halogens in the ram produce a better beam pattern than the h4 in any Toyota I've ever seen.

@lukechoi7598 Год назад

Hi, thank you for the informative video! I am still spending countless nights trying to research led lights for my 2022 hyundai i30 elite cn7 (Australia). I lack knowledge on cars and not too sure what you mean by projector and reflector headlights. Any recommendation for led bulbs which support both low and high beam for my hyundai elantra/i30? Doesn’t necessarily have to be auxito led bulbs. Could be any brand but just anything that would fit my car and last long. No specific budget. Whatever works the best!

@CarLightReviews Год назад

Do you mean that you have a combination low beam and high beam light in your factory housing?

@harryhernandez7066 2 года назад

My car has separate bulbs for high beam and low beams. I was really considering changing my Y13 to the Q16 but the heat concerns me. I think i will use the Y13 for low and Q16 for high.

@CarLightReviews 2 года назад

I think that is a pretty smart approach! Good thinking!

@jm.4071 2 года назад

Can you make a video of how the warranty works and what is covered.. and also how easy or hard it is to deal with that?

@CarLightReviews 2 года назад

That varies from company to company. Most from my understanding are easy to work with. For Auxito, here is the information you might be looking for... auxito.com/pages/warranty auxito.com/pages/returns-refund

@rodrigorc4752 5 месяцев назад

In my opinion, temperature defines the durability/longevity of those lamps. In this case i would opt for the m3 with zes chips. They run low temp, low wattage and great light output(lumens) and ZES used to be a philips chip if im not wrong.

@zooz.m3238 10 месяцев назад

Creative and detailed explanation, and I wish you would show it on the road as well, and I ask you to put a detailed video of the hand of the 9007. We, Ford Crown Victoria owners, suffer a lot from poor lighting, and we do not know which company to choose and which model (please accept my request and put a video about 9007)

@CarLightReviews 9 месяцев назад

I get the request to show road view shots often, but doing so wouldn't be in a controlled environment. My road conditions and ambient light and camera settings might make a headlight look very bright or very dim compared to your conditions, and anyone who makes lighting videos from the road and presenting that as "accurate" is misleading. That's why I do the same test in the same environment every time. My data tells the truth in my videos at carlightreviews.com/headlightspecs

@LuisDiaz-fc6ti Год назад

On Your spread sheet how are they organized? #1 on the list is the best ? the last one is the lkeast?

@CarLightReviews Год назад

I list them from oldest on top to newest on bottom.

@budddyrda Год назад

When you are testing in the F150 reflector housing are you leaving the dust cover on?

@CarLightReviews Год назад

I do not have the dust cover on when I test with F150 headlight, nor when I am doing the projector test.

@luism7593 2 года назад

Would you pick the Firehawk you reviewed over the y13 in a projector headlight?

@CarLightReviews 2 года назад

Personally? The Firehawk is a pretty good light, but I myself still prefer the Y13. The Y13 isn't as bright, but it does have a better output pattern (according to my test setup) and it is less expensive. Plus, I still prefer an external driver design. Have a look at the numbers to compare at carlightreviews.com/headlightspecs

@jedixwolf Год назад

✨nice Vid, I do not see D3S for Dodge Challengers, on Vendor site, Which would you recommend

@CarLightReviews Год назад

I haven't tested HID to LED conversations yet, I don't think they have proven to be an upgrade at this point.

@archivaldo4310 2 месяца назад

Is the y13 brighter and better than the fahren forscher or is the forscher better and brighter than the y13 which one would you go with and why?

@jimbeaug22 Год назад

Q16 are the best ! But you should modified your cover for put them in.. After it's the 10s

@yahyanassar9205 2 года назад

Congratulations for kick-starting the new channel. I am sure it will contain a plethora of valuable Info. If possible, can you try to test: x7sevenusa Apollo Series LED.

@CarLightReviews 2 года назад

Thanks! 😃 I have been checking out the x7sevenusa units. Some look like they have solid specs. I'll do a bit more digging.

@CarLightReviews Год назад

X77 Apollo test video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eLTPlchfsBg.html Don't forget to hit the THANKS link!

@codyberger2762 Год назад

When you test in a projector, do you install the dust cap if it fits?

@CarLightReviews Год назад

I do not, because there's more variations of dust caps size and shape than I can ever account for.

@singhsaab32 Год назад

Hey Man thanks Very much can you tell me which one would fit jn Nissan Kicks2022 SV model. 🙏 Thanks

@CarLightReviews Год назад

That depends on the size that OEM put in. You can easily tell by looking at the bulb currently in it, or doing an online bulb finder search.

@athlonium Год назад

Y13 has less dark spots due to thin board design. Other models have thicker hence got dark spot on them middle bottom

@mrbillcollecta 3 месяца назад

Is it sill called M3? If the H11 the same thing. I cant find M3 anywhere.

@garyschmelzer 2 года назад

I purchased these headlights for my 2022 Chevy Silverado 1500 as I snapped it in place and went to put it in the receptacle area the round rubber seal is very difficult to get back on securely any tips or tricks

@CarLightReviews 2 года назад

Are you talking about a plastic dust cover? Kinda like what is shown here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uwUIePSEUco.html

@Cableman-hr2uu 6 месяцев назад

Hi there, did you ever use an external 12 volt power supply and measure the current used by each of them and see what is the actual wattage they use ??

@CarLightReviews 6 месяцев назад

Yes. That is what I do in every video. Watch this video and you will see that I explain my test methods and see this data sheet that shows the results, including the actual wattage: carlightreviews.com/headlightspecs

@n.shiina8798 2 года назад

have you tried NLPearl 110W 22000LM bulbs or something similar?. they use the same LED chip on Q16 but with separate driver and two heatpipe. id like to see beam pattern comparison

@CarLightReviews 2 года назад

I haven't heard of that company name yet. Where can I find their products?

@n.shiina8798 2 года назад

@@CarLightReviews you can find them on Aliexpress. I believe another brand should have the same thing since Auxito M3 also available in generic brand

@MrVuittonDon Год назад

Can you please tell me what's your honest review of the i9 vs y13? I wanted to use the y13 in my BMW 2018 230i F23 Coupe, but I am afraid maybe it will be to large to fit. Hence thinking of the i9.

@CarLightReviews Год назад

I honestly cannot as I haven't tested it.

@ChrisSglimbeaelectricfingers 2 года назад

Does it matter polarity on the thin nbr1 chiice H11 projector? Bc it apears if i switch polaraty on plug it will be brighter /hotter!!!!

@CarLightReviews 2 года назад

No, it shouldn't matter.

@exploringwithbrian5943 Год назад

Hey I have a question if you could please answer it I have a 2012 Kia Sorento H1 high beam and then h11 low beam I was going to go with y13 bulb for my low beam with is projector my high beam is H11 and I was going to go with either q16 or M13 which would you recommend

@CarLightReviews Год назад

That's really all up to you and what you need out of your lighting and your budget. Using Y13 as lows and the Q16 as the high beam is not a bad plan, but if you need to save a few bucks, the M3 is a good high beam alternative.

@pbatacan 2 года назад

Got the q16 and it’s a beast. Have you considered airflow when driving? I believe there must be at least some sort of airflow when you drive. As such, it might actually be retaining a tad more lux after 27mins. Thanks for your review! Maybe you could also do a comparison between those fanless leds (braided aluminum) vs those with fans. I want to know their thermal performance.

@CarLightReviews 2 года назад

Yep, that Q16 is indeed a monster when it comes to output. How long have you been using yours? Yes, there is always the airflow aspect to consider, but I can't test for the difference in sitting at a stoplight and doing 150mph (which I may or may not have done a time or two) so that is why I test the halogen as a baseline and the LED upgrades in the same exact consistent environment. I used to use the fanless headlights with the braided aluminum heat sink and they seem to work OK, but I think there is a reason that they are not more common. Powered fans seems to be the way to go. I think the only way I could do a test to see the true effectiveness of of the braided heat sink is to find one that has has both versions...a powered fan or the braids....but otherwise exactly the same. I am not sure if something like that exists.

@pbatacan 2 года назад

@@CarLightReviews i just got it installed a week ago haha. The fans are audible when you are outside. Not really that it bothers me, more like Im afraid it would conk out after a year or two. I hope it lasts. Im using novsight h11 (a common brand) before the q16 and its really an improvement from the already bright LEDs that im using. My H4 lamp has this braided thing. Already using it for ra year. So far so good. This H4 brand im using has an interesting design, the low beam does not turn off then you use high beam. Effectively you are using either low or low+high beam. Thereby increasing light output tremendously. Have you reviewed h4s before?

@CarLightReviews 2 года назад

@@pbatacan I have some Novsight lights that I will be testing in the near future. When you say "H4", are you referring to the size or a brand name? I am having a hard timing finding H4 brand LED lights...only the H4 size.

@pbatacan 2 года назад

@@CarLightReviews the H4 bulb type not the brand. Ohh nice! Im looking forward for your future reviews. H4 type bulbs are most common here in our country as headlight bulbs. H11 are used as fog lights.

@InJasonsGarage 2 года назад

@@pbatacan Gotcha...that's what I thought. I test in H11 size because, as you saw at the 1:34 mark, that is what is most common in my country. 😀. Of all of the Novsight models out there, which one do you think I should test first?

@slmyatt 2 года назад

Bought the Auxitos Q16 for my 2011 Honda CR-V, and they work well. Due to OEM shaped beam pattern, oncoming cars are not blinded by me, and I am no longer blinded by them. Daytime driving lights work, low beams illuminate road very well, and high beams illuminate triple the distance of old bulbs. I am very happy with results.

@CarLightReviews 2 года назад

Glad to hear it!

@cutesammie 7 месяцев назад

My Auxito M5S just arrived from Aliexpress and it looks like it's an upgraded version of the Q16. I got a good deal on it @ under £25. It's rated at 120W per pair (60W per bulb). I tested it with a USB-C PD trigger and it shows 44W. I've not installed it yet as it just arrived and the weather has been terrible. I will be looking forward to your review of it just in case. Thanks for all your reviews...

@toyotabrony 6 месяцев назад

So with 44 watts per bulb. That means it produces 4400 lumens per bulb. That’s actually very bright for all in one unit.

@cutesammie 6 месяцев назад

@toyotabrony Yes, it's really very bright. One quick thing to note is that the PD trigger is limiting the bulb from reaching its maximum possible wattage. The reason being is because I also tested novsight N60 (which is rated at 100W per bulb) with the same PD trigger and I observed 32W per bulb. However, according to this channel, 66.2W per bulb was observed for N60. In essence, the PD trigger is not reporting the correct wattage. The only way to know the correct power rating of the bulb is to use a proper power meter. Since I don't have that, I had to settle with what I have.

@toyotabrony 6 месяцев назад

@@cutesammiesome of these gadget cannot read very accurately. So this is the best thing to know when it comes to car light reviews.

@victorvek5227 2 года назад

Is the Auxito Y13 still your go-to-recommendation under $50-60?

@CarLightReviews 2 года назад

Yes, it is...but you never know when something is going to come along and become the new champ. Some other lights are coming that might do a better job. Be sure to SUBSCRIBE and of course, review the data at carlightreviews.com/headlightspecs

@mitchherz8869 Год назад

How about the new 9003 H4 20,000 L ?

@Matthewjames0524 7 месяцев назад

I have a 2013 ford fusion. I want the Q16s because with halogens I can’t even drive in the rain. But I’m worried it won’t fit in the dust cover

@CarLightReviews 7 месяцев назад

In these situations, I always suggest that you consult your favorite social media group or message board specific to your vehicle to ensure fitment.

@OliverFortea 6 месяцев назад

I’m looking to upgrade my current low beam halogens. I’m worried about LEDs being too bright for a low beams I have a reflector headlight. Is the M3 a viable option for low beam headlights on. Volvo S80?

@CarLightReviews 6 месяцев назад

Unfortunately, I can't suggest a recommendation for specific vehicles as I can't test them all, I am sorry to say. That's why I can offer a baseline reference. However, I do suggest that you review my headlight data spreadsheet here: carlightreviews.com/headlightspecs and use that data to guide your decision. Sorry I cannot be more specific to your needs!

@joshuadade5887 2 года назад

I've noticed that on the Auxito website, they have HB3 instead of B3. Are they the same lights or something different?

@CarLightReviews 2 года назад

Did you mean HB3 and H3? If so...no, they are not the same light size.

@JeremyLeech Год назад

I had the Q16 installed for a few days. Honestly, they were TOO bright. Felt like I had high beams on all the time. Not to mention the fan noise was quite loud. Just switched to the M3 and it’s perfect! UPDATE: I have since switched to the Y13’s and they truly are the best bang for your buck!!

@CarLightReviews Год назад

Glad you found the right light for your application. Question...did you aim the headlights after you installed the Q16?

@JeremyLeech Год назад

@@CarLightReviews Yes I did (also thanks to youtube) they were just TOO bright for me. But loving the M3's.

@JeremyLeech Год назад

@@CarLightReviews came back here to say I switched to the Y13. The m3 were good, but I kept thinking about how the y13’s seemed to be better. Especially with your tests. I have since switched to those, and have returned the other ones. I may be indecisive, but I love these ones! Haha

@jonmanilenio Год назад

i can't believe you can hear the fan noise of headlight bulbs over the din of the engine. you must have super hearing or something 🙂

@realtyrocks1969 9 месяцев назад

How is heat after say 4 hours? I typically do a long drive that requires being on highway for 3 to 4 hours at night with brights on. Will these be ok with extended use? My bulbs are 9005.

@CarLightReviews 9 месяцев назад

They almost always stop declining after anywhere from a few minutes to 15-20 minutes, depending on the quality of the light. The system regulates the power to mitigate heat. Better quality lights do a better job of that while keeping brightness. Cheap components need to be dimmed a lot more because they cannot handle the heat.

@drew6090 2 года назад

Got set h7 m3 type just fitted today bmw waiting for the darkness. Has adjustable clip which is good. Does flicker very slightly tho me being picky. No error codes. Hope they last long than my upgrade halogen bulb

@CarLightReviews 2 года назад

I am wondering about the flicker. Is it obvious or do you have to really pay attention to notice it?

@drew6090 2 года назад

@@CarLightReviews you really have to pay attention. Not obvious

@CarLightReviews 2 года назад

Good to hear. Truth be told, I have noticed the same one my Jeep Grand Cherokee for years...so might be similar.

@drew6090 2 года назад

@@CarLightReviews iv just fitted same bulbs for the high beam now got error code bit odd. Need to get a decoder or resistor (which might help the slight flicker) let ya know. They are great lights drove tonight with new high beams loads better.

@xinny4190 3 месяца назад

So the age old question: Is it a good idea to install an LED bulb inside a projector headlight meant for Halogen bulbs?

@exploringwithbrian5943 Год назад

I have a question I have a 2012 Kia Sorento low beam h11 I can't find the y13 bulb and what would be the best high beam which is H1 what would you recommend for auxito

@CarLightReviews Год назад

Links are in the description of the video.

@MrVuittonDon Год назад

Are you familar with the I9? It seems to be smaller in size but the details in the spec doesn't really explain anything enough. I want the y13 it's just not sure if it will fit my 2018 BMW 230i fog light application.

@toyotabrony 7 месяцев назад

If it’s an H11, u need an H11. Check ur vehicles space to see if it has enough room.

@trendingclix Год назад

may i know the difference between Auxito MS5 series led and Auxito Q16 series led ?and whats the best led model?

@CarLightReviews Год назад

Sorry, I am not familiar with the Auxito MS5. Where can I take a look at the details?

@ericspurlock7775 2 года назад

What's the brightest LED bulb you have test to today.

@CarLightReviews 2 года назад

it is hard to say, as I have evolved my testing methods over time to be more accurate. Is there a particular light you are looking into? I can give you my advice based on my experience.

@amtrakfan5511 Год назад

I'm broke to afford the newest version of auxito. What would you recommend for auxito headlight high beams LED (last year version) from ebay?

@CarLightReviews Год назад

I think my results in this video give you the information you need on which I would recommend. :)

@exploringwithbrian5943 Год назад

Jason I'm having a hard time finding the auxito led in h11 the y-13 bulb and h1q16 where would be the best website to purchase these bulbs I tried calling the company direct but they don't answer the phone

@CarLightReviews Год назад

Links are in the description of the video.

@nathanielreyes4965 6 месяцев назад

which is better 22k lumens y19 or 22k lumens m5s in terms of durability and brightness ps the 24k lumens y19 isnt available in my country 😢

@dipankar4865 6 месяцев назад

Auxito Y13 thoroughly resembles Osram 25 watt led .

@PatrickLesterQuian 3 месяца назад

Hi which do you think is better? Novsight or auxito? I'm thinking of buying novsight n60 but i came across this brand.

@CarLightReviews 3 месяца назад

You have to define "better". What is most important in an LED lighting upgrade for YOUR needs? Brightness? Value? Quality? Pick two of the three. Then, take a look at my spreadsheet at carlightreviews.com/headlightspecs and review/compare the data based on the two categories you chose. That should help!

@MasterSumai Год назад

Would you recommend the Y13for a 2023 KIA SELTOS EX with Projector Housing? They have that shutter inside that switches back & forth for your High & Low beams.

@CarLightReviews Год назад

Unfortunately, I can't suggest a recommendation for specific vehicles as I can't test them all, I am sorry to say. That's why I can only offer a baseline reference. However, I do suggest that you review my headlight data spreadsheet here: carlightreviews.com/headlightspecs and use that data to guide your decision. Sorry I cannot be more specific to your needs!

@MasterSumai Год назад

@@CarLightReviews Thank you for your help. Could you recommend what 9005 LED bulb best used in Projector housings in general? Brightest ones 🙂

@CarLightReviews Год назад

@@MasterSumai Check the spreadsheet I linked to above, that has all of the data on brightness to help you make a decision!

@MasterSumai Год назад

@@CarLightReviews Thanks, will do!

@MrTherandomvidsguy Год назад

Just installed their brightest one (B16) last month and so far so good. Actually my favorite so far. The M3 was great until a diode died within a few months of use. The Y13 died (left one) after 4 months of use.

@CarLightReviews Год назад

Auxito has a 2-year warranty. Did you reach out to them to see if they can replace the ones that failed?

@MrTherandomvidsguy Год назад

@@CarLightReviews I should have mentioned they did lol but I just wanted something brighter anyways. Tbh I saw the auxbeam GX and now I want that

@CarLightReviews Год назад

@@MrTherandomvidsguy Cool. The Q16 is a good light, but that newly released Auxbeam GX that I reviewed is pretty impressive!

@daltonbarton4315 2 дня назад

Is the y13 a fog light or headlight?

@Shadow-wq4xh 7 месяцев назад

Can I use the AUXITO M3 as a fog lights? I’m asking because I’m trying to find good fog lights for my SCION TC 2014.

@CarLightReviews 7 месяцев назад

If they make it in your fog light size, yes. Remove your existing bulb and look at the size designation stamped on it or check your owner manual to see what size you need.

@toyotabrony 7 месяцев назад

Ur 2014 Scion tC will have a great results, by using M3 as a fog light application.

@rudydaberry122 26 дней назад

Are auxito considered good and better than the other Amazon brands?

@MrVuittonDon Год назад

Are any of these daul color? Recommend any dual color or multi color BRIGHT LED fog lights?

@CarLightReviews Год назад

No, these are single color lights.

@toyotabrony 7 месяцев назад

I would recommend Lasfit - LD plus switchback. They have dual colors of 6000k and 3000k. $100 per pair.

@gello88 2 года назад

Thanks for the detailed comparisons! I have a question regarding your y13 bulb on one of your vehicles. How is the performance when going a long night drive say a couple hours or so of driving? Do they hold up?

@CarLightReviews 2 года назад

Yes, we have used that vehicle on many 1,000 mile round trips with no noticeable decrease in performance other than the initial drop before heat management takes care of leveling it off.

@gello88 2 года назад

@@CarLightReviews that’s great to hear that it can handle such stresses like that.

@CarLightReviews 2 года назад

@@gello88 It does great. For the money, out of all of the lights I have tested on this channel and my other one where I started doing LED light testing...I still often suggest the Y13 as the best balanced budget LED headlight replacement. You really can't go wrong with it.

@xvxzarehunter3599 2 года назад

Do the leds show a light on the dash, i have mixed info about that? (With the integrated driver (or is it canbus module?))

@CarLightReviews 2 года назад

What kind of light? Like an error light? If so...that depends more on the vehicle than the light itself. Some are more sensitive than others

@xvxzarehunter3599 2 года назад

@@CarLightReviews yeah on the vehicle…interested in the H7 variant of the all in one design light (like the second placed on in your opinion) but i don’t have enough room in my headlight because it is aftermarket so my only option is a compact design without an external canbus. My car is a VW Polo 6R and it does typically show a dash light when I use leds without a canbus module…

@CarLightReviews 2 года назад

@@xvxzarehunter3599 I wish I could assist you but I am not familiar with how sensitive some cars are to LED upgrades. You might want to check some forums or Facebook groups and hit up someone with first-hand experience. They can likely help much better than I can!

@trebla2359 8 месяцев назад

im your sucriber from Philippines. what is recommended for montero sport 2016. im preferred to use auxito look led headligth . Pls reply. Thank you

@CarLightReviews 7 месяцев назад

@khalilberbere7352 Год назад

Hi dear what the best lihgt model for ford mondeo mk3 🙏🙏

@CarLightReviews Год назад

Unfortunately, I can't suggest a recommendation for specific vehicles as I can't test them all, I am sorry to say. That's why I can offer a baseline reference. However, I do suggest that you watch this video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YMxLhQtwB7I.html as well as review my headlight data spreadsheet here: carlightreviews.com/headlightspecs and use that data to guide your decision. Sorry I cannot be more specific to your needs!

@eduardougalde8809 5 месяцев назад

Maybe you’re more informed than me but do you know anything about any of these on a 18’ charger, I have the m3s and I’ve had them for about 4-5 months and now they’re dimming off and on while in park, engine off, driving just randomly. assuming it’s maybe I got a bad set or recommend any other brand?

@CarLightReviews 4 месяца назад

In these situations, I always suggest that you consult your favorite social media group or message board specific to your vehicle.

@sic22l 15 дней назад

The gap at the bottom of the beam has nothing to do with the amount of light (there's no such thing as too much light that can affect the shape of the beam) but with the bulb design. It's the reflection of the gap between the emitters, the same one you would see when shining at the wall. That's why the Y13 didn't show any gap, with its design LEDs are very close together and there's no "walls" around them to stop the light therefore there are no gaps either.