Nissan 350Z / Infiniti G35 Secret Diagnostic Testing MODE | AnthonyJ350

Подписаться 119 тыс.

Просмотров 27 тыс.

50% 1

There is a Secret Diagnostic testing mode built into the Nissan 350Z and the Infiniti G35. Sometimes you might need an extra set of hands when diagnosing electrical issues. This feature might make things a little easier for you if you have to tackle a job on your own.
#Nissan #350Z #Diagnostic #Testing #Electrical
Subscribe for more automative tips!: bit.ly/sub2anth...
Watch my most popular uploads!: bit.ly/anthonyJ...
Check out my Amazon storefront www.amazon.com...
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com...
E-Mail: info@gofasthavefun.ca
T-Shirt: teespring.com/...
Music available - www.jinglepunks... & www.epidemicsou...
Intro - "Heartbreaker'" - Gloria Tells
Outro - "I just can't change my Emotions" - Basixx
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavef...) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Nissan 350Z / Infiniti G35 Secret Diagnostic Testing MODE | AnthonyJ350
• Nissan 350Z / Infiniti...
ANTHONYJ350
/ anthonyj350

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 125

@king31863 3 года назад

This was the most awesome thing I've seen. I've had my Nismo for 15 years and never seen this....👍🏽

@AnthonyJ350 3 года назад

Glad you like the video 😀

@CVObservatory 4 года назад

That's a pretty cool feature. I never knew that about the 350z. Thanks for sharing that.

@AnthonyJ350 4 года назад

I thought it was really cool when I first learned about it.

@Kucklehead223 4 года назад

My Gawd, I had no idea. I know about the dreaded accelerator/key pedal dance but this is the first time I've heard of this feature. Thanks Anthony!

@AnthonyJ350 4 года назад

Ya it's pretty cool.

@mikelmassoud4679 3 года назад

The clicking before the fans turn on is the ac compressor

@AnthonyJ350 3 года назад

Thanks for sharing!

@stopher1971 2 месяца назад

This is great, I just replaced both motors, only one was bad, but what the hell, and holy crap what a difference I go from 208 down to 196 in the matter of seconds, but I actually have to try to get to 208 because it’s rare for my car to even go that high so this test was great for that and I’ll tell you what both fans running on low. You cannot hear them at least from the car and barely outside of the car and they are very effective. Used those TYC brand motors with original assembly I’m a happy camper Thanks dude! ‘06 G35 coupe

@AnthonyJ350 Месяц назад

So glad to hear the video helped with your diagnostics!

@BAPTruckin 2 года назад

Worked on 2004 fx35. Thanks.

@AnthonyJ350 2 года назад

Thanks for sharing!

@captainzz4723 4 года назад

You and I have the same dreaded white powder on the hoses 😂 Could be because my hoses are getting old (new radiator) but the hoses have been going white for some time now (mainly to the left of the block). Am going to do a leak test soon. Awesome video yet again man. 👍

@AnthonyJ350 4 года назад

Ya if you research silicon hoses, they're kind of porous, which I suppose leads to the spots. The car isn't daily driven and I check fluid levels, so I'm not too concerned.

@cre8tivegarage157 4 года назад

never knew about this feature interesting

@AnthonyJ350 4 года назад

I think it's pretty neat.

@jaywild642 2 года назад

Good video great piece of information

@AnthonyJ350 2 года назад

Thanks for watching!

@shadowoffair09 4 года назад

Thought I had heard all there was to hear about the 350s modes. Ya learn something new! Thanks

@AnthonyJ350 4 года назад

You bet!

@shadowoffair09 4 года назад

@@AnthonyJ350 in your video you had all of the plastic covering removed on the right side. Even the piece that makes a water seal against the windshield. Well, the previous owner did the same on my car and broke that weather strip. Is it hard to replace? Obviously they didn't tell me and it wasn't noticable until I started detailing the car. I fear water has creeped into places it shouldn't be and rusted.

@AnthonyJ350 4 года назад

@@shadowoffair09 The piece definitely directs water away from the HVAC intake and the firewall grommet. The windshield is sealed by the glue that holds it in. Did you remove it and inspect underneath?

@shadowoffair09 4 года назад

@@AnthonyJ350 no I did not take it off. I never figured out if it was hard to disassemble or not. I'll take a look at it for sure. I have never had any issues with the HVAC system thus far but I have just one event of mild water under the passenger foot well. It was after driving in a very bad storm. Guess I have some inspections to do

@350dayzee6 4 года назад

Awesome, keep it up. Wish it could tell me if I have a bad APP sensor

@AnthonyJ350 4 года назад

You would have to use a multimeter and measure resistance. What's going on with the car?

@350dayzee6 4 года назад

@@AnthonyJ350 I tested it as per the workshop manual. Power and resistance is there, although the workshop manual doesn't say what the resistance should be. So the problem is that limp mode pop up when I press the accelerator pedal for longer than 3 sec. After I installed a new sensor and did the relearns, it worked for like 2 months. Now its back again. Do you know what figures I should get for resistance on the sensor?

@timphillips7693 2 года назад

Yes I think it all right

@AnthonyJ350 2 года назад

Thanks for the comment!

@juanmorganreyes 2 года назад

Thanks.

@AnthonyJ350 2 года назад

You're welcome

@malcolmcooper9509 Год назад

works for Z34 as well , just tried it

@AnthonyJ350 Год назад

That's awesome! Thanks for sharing!

@lordzed83 4 года назад

interesting and usefull.

@AnthonyJ350 4 года назад

Glad you think so!

@roned9189 4 года назад

😎 cool vid 🇬🇧👍👍🇬🇧

@AnthonyJ350 4 года назад

Thank you!

@julianpiedrahita5651 4 года назад

great video! what problem are you having with your Z?

@AnthonyJ350 4 года назад

None, I've been researching and tinkering with the car and discovered this. Thought I would share it.

@timphillips7693 2 года назад

I think it's lost oil pressure not sure I just got in on it she had someone over here and he almost had the motor tower down and all most out I got it put back together now I ant getting getting any fire to it so I am going to crank shaif senser and cam the same

@stanleypurifoy1623 4 года назад

The altima and maxima have this to that I know of

@AnthonyJ350 4 года назад

Makes sense that Nissan puts it into all of their product.

@stopher1971 2 месяца назад

What’s the loud ass blinker sound (clunk clank clunk clank) after the headlights that about gave me a heart attack at first

@zdan63 2 месяца назад

That's the AC compressor clutch

@AnthonyJ350 2 месяца назад

Relays

@hirolla10 2 года назад

I did this and only the drivers fan came on. Do you think my other fan is bad?

@AnthonyJ350 2 года назад

Check all the fuses and relays first

@JUNEORJUNE 4 года назад

Hi there sir, My 2008 350z is causing transmission to stall and cut out at 3K-4K RPM. Does this mean I need to replace my fuel pump or do I have a bad transmission? My 350z only has 83K miles.

@AnthonyJ350 4 года назад

Did it throw a code? Sounds like you need to bring it to a mechanic that has worked on these cars.

@JUNEORJUNE 4 года назад

@@AnthonyJ350 I DID TAKE IT TO A NISSAN MECHANIC AND GOT IT DIAGNOSIS DTC'S P0731 AND P0732

@elicaulder6941 3 года назад

Check cam sensors vacuum leaks your vtc solenoids could be bad Ecm there could’ve a short in your harness bad coils etc

@stopher1971 2 месяца назад

Are both fans supposed to turn on or just the driver side high and low? My passenger side does not come on at all during testing

@AnthonyJ350 2 месяца назад

Should be both

@stopher1971 2 месяца назад

@@AnthonyJ350 thanks I did swap the driver side plug over to the passenger side fan and turned on my AC. The fan did turn but slow and weak. I could stop it with my finger. Will swap out the motor tomorrow morning.

@dougfromClearwater Год назад

Cool beans

@AnthonyJ350 Год назад

Thanks for watching!

@Aevoa Год назад

Noticed only one radiator fan is kicking on whole driving with ac on. Decided to try this only to find out neither fan turn on dueing the diagnostic. Im assuming i just need a new fan?

@AnthonyJ350 11 месяцев назад

Fan does work though. What's controlling the fan there's something wrong. Does it turn on by itself when idling when it gets hot?

@hakimrahman85 4 года назад

Hey Anthony, are you able to guide me on how to take out driver side under dashboard plastic panel for a RHD 350z? I can’t seem to find a way to uninstall the bonnet handle.

@AnthonyJ350 4 года назад

Can you email me a picture of the dash at info@gofasthavefun.ca

@Thaibxer21 5 месяцев назад

Does this confirm IPDM functionality?

@AnthonyJ350 5 месяцев назад

Technically does I suppose.

@Thaibxer21 5 месяцев назад

@@AnthonyJ350 I've done this before because i had issues with my headlights only one was on. I knew it was good i recently changed the ballast and bulb along with some janky wire mending with electric tape. Performed this test and i was surprised it worked back then, but as of now about several weeks later i cant get the mode to engage. Nothing happens, I do get a flashing ses after a few seconds of the car being in the on position about 5x. I have u1000 & p0462 code

@stopher1971 Месяц назад

How do you do the instrument cluster test? I can’t find it anywhere.

@AnthonyJ350 Месяц назад

What's going on with yours?

@stopher1971 Месяц назад

@@AnthonyJ350 if I understand correctly this is how you can tell if your fuel gauge is a cluster issue or something else Mines kind of in different places when I start the car but eventually makes it way to being correct after driving a little, the needle never goes below what’s in the tank, Let’s say I have a half a tank when I start the car in the morning it reads full or 3/4 but after driving a half a mile, it’ll go to a half a tank, and if I top it off when the needle reads 1/2 tank, it takes 10 gallons, which is correct, I believe during the self test if the cluster is OK if the needle lands on a half a tank, regardless of how much fuel is in the tank, it might be ignition off press the odometer needle turn the ignition on and tap the odometer needle three times, I’ll try in morning

@stopher1971 Месяц назад

@@AnthonyJ350IGN off: Press and hold A/B trip odo needle: IGN on: Let go of A/B needle & push it 3 times Then push & hold A/B needle DONE You prolly already knew that

@AnthonyJ350 Месяц назад

@@stopher1971 Actually, no I didn't know that. Will have to do a video to share with others. Thank you for teaching me something new 🙂

@richardanderson8921 Год назад

How would I test the relay. I Do this test everything comes on except fans. Can't drive keeps overheating

@AnthonyJ350 Год назад

You can swap the relay with another relay you know is functioning.

@shawncoggins8803 Год назад

Hey can you tell me what my battery voltage supposed to be

@AnthonyJ350 Год назад

This video should help ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2_sFE_M16ps.html

@bigmacsauce4208 3 года назад

When I do this process my oil light keeps flashing any idea what it means?

@AnthonyJ350 3 года назад

What's the oil level? Did you do this to your vehicle yet? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1Yrlq285UHY.html

@al3zmi 3 года назад

Hello I have an issue and I'm starting to give up...I have done everything inculding Google research, checked with multiple shops...I bought 370z which had front collision but most electrical parts were not damaged airbag didn't depoly it wasn't bad collision now I repaired everything and found out my OBD II is not working I checked all cables, fuse..changed the white obd thing you put the computer to check donno what's call in English, thanks.

@AnthonyJ350 3 года назад

When you scan the vehicle, can you communicate with the computer?

@AnthonyJ350 3 года назад

Did you check all the fuses? Does you scan tool power up when plugged in?

@al3zmi 3 года назад

@@AnthonyJ350 there is no signal, no power at all, I checked fuse it was working, wires looks good but couldn't see everything, I even changed the white adapter thing where you plug in the scan tool but still same issue it doesn't get any signal, all electrical system is working fine in my car though. Thank you for replying.

@AnthonyJ350 3 года назад

@@al3zmi If the engine runs, there might be a broken wire or pin at the OBD2 plug.

@glsaintlord163 8 месяцев назад

Hey bro can you help me, I’m having issues with my 350z it doesn’t run very well, I have the vdc off, slip, check engine lights, it runs but it does accelerate correctly, idk if it is in test mode or limbo mode

@AnthonyJ350 8 месяцев назад

Did you scan it?

@seanscrivens 4 года назад

Anthony. Do you know how or do you know how to repair the headlight leds without replacing the whole headlight? I have an 06 360z.

@AnthonyJ350 4 года назад

I haven't done it, but you would have to disassemble the assemble and install a new LED. I'm over simplifying as you would have to probably delaminate several layers and there's probably a circuit board attached to it as well.

@seanscrivens 4 года назад

AnthonyJ350 thanks for the reply. I don’t want to destroy my headlight.

@mrv6uk 4 года назад

This video has already been posted by AnthonyJ350 a while ago..

@AnthonyJ350 4 года назад

I don't think so, I never covered this particular feature till now. Unless I forgot about it. Can you show the video and time stamp.

@NZLTruly 4 года назад

Did you swap HR door panels on to your DE? What other HR parts have you switched? :)

@AnthonyJ350 4 года назад

I didn't switch anything. 2006 has the newer interior and front bumper.

@NZLTruly 4 года назад

Oh, learned something new. Thanks

@BrAnarkey 2 года назад

I cannot get this to work at all? I can’t figure out why not.

@AnthonyJ350 2 года назад

Not sure why it's not working for you. Is the car battery good?

@BrAnarkey 2 года назад

@@AnthonyJ350 yeah. Actually had to get a new one because the car had been sitting so it died. Just replaced the battery a week ago

@autoperformance503 3 года назад

I want to do Stage 1 tuning on my 2003 350z , just want to Add little pop and bangs . What is the best tune for that ? Uprev?

@AnthonyJ350 3 года назад

Uprev dyno tuned. The goal of tuning is to make the vehicle run properly, not necessarily make extra noises.

@autoperformance503 3 года назад

@@AnthonyJ350 and my 350Z takes 91 octane , 93 will add more power ?

@AnthonyJ350 3 года назад

@@autoperformance503 No, 91 is more than sufficient for the car's compression ratio. Unless you have a turbo or super charger.

@autoperformance503 3 года назад

@@AnthonyJ350 yes . But 93 has higher compression ratio resulting in little extra Power?

@AnthonyJ350 3 года назад

@@autoperformance503 93 is the octane rating, the vehicle engine has the compression ratio

@nicoblaytherealflamingo445 2 года назад

Do you know of any websites that answer Nissan \i finiti problems over video or calls not just chat message? I have bad electrical problem and now they say 2k to replace g35 computer. Said fuck that and when they gave me car back oil leaked everywhere and spark plug was taken out. Pretty much everything needs to be timed up esp the pistons

@AnthonyJ350 2 года назад

Sorry, no I don't.

@renownedfear187 3 года назад

video was all good till i seen how clear your lights are.. damn im upset now lmao

@AnthonyJ350 3 года назад

Lol sorry

@MindOfLJ 3 года назад

Mine isn’t working, aswell as my onboard key fob programming :( any pointers?

@AnthonyJ350 3 года назад

How is the battery voltage?

@MindOfLJ 3 года назад

@@AnthonyJ350 great, just replaced it aswell :( I’d hate to have to pay pepboys Bc they quoted me 340 but idk man it’s so hard to find the issue

@AnthonyJ350 3 года назад

@@MindOfLJ What did the battery voltage read when you tested it?

@MindOfLJ 3 года назад

@@AnthonyJ350 15 volts

@AnthonyJ350 3 года назад

@@MindOfLJ That's really high. 15 just sitting there with everything off?

@seanparker1759 3 года назад

Does this test the guages as well

@AnthonyJ350 3 года назад

What's wrong with your gauges?

@seanparker1759 3 года назад

@@AnthonyJ350 its all over the place my oil pressure. Ever since i replaced the oil sending unit the manual guage read 30 and stayed steady, but the guage in the car says 5 and when i come to a stop my oil light comes on and goes off when i accelerate

@AnthonyJ350 3 года назад

@@seanparker1759 Maybe it's the sending unit since you only had issues since you replaced it? Why did you replace it?

@seanparker1759 3 года назад

@@AnthonyJ350 i changed it again. I replaced it because is was the stuck on 120 situation. The new one goes to 90 when the car is in acc not even on its gotta be the new sending unit or a bad connection somewhere. I got both the sending units off ebay so that might be my first problem lol. It reads 30psi at idle on a manual guage doesn't move stays dead on 30 when fully warmed up

@AnthonyJ350 3 года назад

@@seanparker1759 With a major part like that just get the O.E. version. An incorrect reading you can do major damage

@davidk033 4 года назад

What Clutch Do You Recommend For 05 350z ?

@AnthonyJ350 4 года назад

Z1 has a bunch of options. You'll also want to upgrade the clutch line to a shielded braided line and the pivot ball should also be upgrade. www.z1motorsports.com/z1-products/z1-motorsports/z1-350z-g35-vq35de-clutch-and-flywheel-kit-p-2405.html?list_name=Related+Products www.z1motorsports.com/transmission-driveline/z1-motorsports/03-chromoly-clutch-release-fork-pivot-ball-p-6518.html