Nissan Altima Hybrid - No Start Diagnosis! / No communication! 

Me too 😂

When this is your daily job and you have an interest and passion in it, this comes easily.

I appreciate that!

Thank you for watching!

Thanks!

Thanks 👍

Thank you so much!

Thanks!

Thanks for watching!

Thanks! But Scanner Danner will always be the best!

Thanks!

Thank you very much!

Cool! this was my first time seeing a shorted coil blowing a fuse.

@@advancedleveldiagnostics yeh same for me lol, never seen a coil internally shorted like that

Thanks for watching!

Great 👍

Thank you!

💯

💯

Thanks for watching!

Thanks!

Thanks for watching!

Thanks!

Thanks again!

Thanks!

From my understanding with the fuse removed you should have one terminal in the fuse box hot and the other side not. If the other side was grounded (via a short) it would cause the test light to light up (one terminal has power and the other terminal shorted to ground)

@@mrnabzio4488 but wouldn’t the computer provide the ground path, since he left the car on? Or maybe I missed that the car was turned off.

The brightness of the bulb is the giveaway. That's a high wattage bulb so it has low resistance. You have essentially two resistors in series, Whatever the circuit should be feeding, and the bulb. If the circuit load is high resistance, voltage is limited through the bulb and it will be dim. If it's a dead short (low resistance) voltage available at the bulb increases and it glows bright.

@@ojmbvidsThat makes sense. Thanks for the explanation.

Cuz u have a ground on one side and power on the other

Thanks for watching!

Sure is!

www.jarheaddiag.com/shop/p/highamptestlight

advancedleveldiagnostics@gmail.com

My pleasure! Thanks for watching!

www.jarheaddiag.com/shop/p/highamptestlight

@@advancedleveldiagnostics Thanks..

Which problem the communication after I unplugged the coil? I tried that with a regular fuse.

No I commented before I watched the entire video but previously when you had ur light still plugged into the fuse slot and not a fuse I thought was why it wasn't communicating. But maybe it was a scan tool issue? Odd it worked by going into the module but didn't work in topology. But I love ur videos and learn alot from you.

It's the actual diagnosis; however, I do edit the videos and cut out sometimes when I'm looking for a part, people coming over, answering the phone, ect.

@@advancedleveldiagnostics nice work bro , very efficient many of it most would have been chasing a wiring issue for at least 30 minutes before even thinking to unplug the engine controller .

Thanks for watching!

💯🤣

lol I can never get it straight!

Thanks 👍