No video :(

Nissan Frontier: Front Wheel Bearing

Подписаться 904 тыс.

Просмотров 158 тыс.

50% 1

I am sucking the gravy on this job! Front wheel bearing on a two wheel drive Nissan Frontier. They don't get much easier than this folks. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/...
The South Main Auto Amazon Store:
www.amazon.com...
AES Wave Automotive Diagnostic Tools: www.aeswave.co...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained

Опубликовано:

13 фев 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 474

@SouthMainAuto 5 лет назад

*Impact used in this video: Ingersoll-Rand 232TGSL: amzn.to/2N5Eubf *BiG NaStY: amzn.to/2toFyOm * Astro Tools: amzn.to/2tlCthY

@TonyM-zi9rq 5 лет назад

You sound like the guy from the Red Green show lol.

@twn5858 5 лет назад

@@TonyM-zi9rq He does doesn't he? I'm surprised anyone remembers that show. They use to air that show on PBS back when I was a teenager.

@TonyM-zi9rq 5 лет назад

@@twn5858 I'm 49 and had never watched the show until my Dad last year when he mentioned it before he passed. But yeah he sure does lol.

@JeremiahMulford 5 лет назад

Got an idea, when you use electric cleaner, have a old dialup modem sound effect for the videos.

@JohnSmith-jb9vg 5 лет назад

If you made a grey tshirt with big nasty in the center that said south main auto around it, id buy it

@bigclivedotcom 5 лет назад

That looked refreshingly straightforward compared to some of the others you've done.

@forevercomputing 5 лет назад

I did not expect to see you here. Hello, sir!

@rimmersbryggeri 5 лет назад

Yep clive but had it been a ford or a VW the torx heads of the bolts would have been all rusted out. Hours of fun for the family is what that is.

@johnrobinson357 5 лет назад

Big Clive in the house !

@slowride55 5 лет назад

This is how smoothly I always picture my jobs going. I usually prove myself wrong.

@SavvyWizard 5 лет назад

No doubt had a simple brake job, end links job turn into a 4 hr ordeal last week. Or spent 2hrs beating out a kingpin today.

@robmut1357 5 лет назад

Thanks Eric for allowing us to look over your shoulder and learn from a real professional. Your skill and integrity are always evident in your videos.

@nickharding7713 5 лет назад

Using Big Nasty for the wiring removal!!! LOVE IT!!

@wkdravenna 5 лет назад

XXX

@shahsmerdis 5 лет назад

it was like "Pew" and it broke

@dans_Learning_Curve 5 лет назад

Yep! That made my evening!

@mattmaryan1121 5 лет назад

It's nice to hear it as it is. You prove every auto repair you perform. that's why I like your channel. I could care less about the money or perks. You are a genuine mechanic with a fathers background to prove it!

@richardbambenek2601 5 лет назад

Finally I can agree with you when you say "If I can do it you can do it" No special tools required so I think I could do that job.

@catmshtr89 5 лет назад

That appeared to be the easiest wheel bearing I've seen you change.

@dquam3885 8 месяцев назад

Back when I was a kid, you just undid the spindle nut and popped the bearings out. Getting the race out was the hard part. But bearings were made to be repacked, and rarely failed.

@7daystodieyeahbuddy919 5 лет назад

*PERFECT* Valentine's day for me. Wife is out of town, No kids, T-Bone steak for dinner, ❤BiG NaStY❤ and ❤New Brake Cleaner Fire Hose❤ on this gravy repair video. ❤❤ BEST Valentine's Day EVER! ❤❤

@robc5955 5 лет назад

7 Days To Die YEAH BUDDY you forgot the beer.

@7daystodieyeahbuddy919 5 лет назад

@@robc5955 Would LOVE a beer , however a recovering alcoholic, 9 months sober. Enjoy yourself.

@briantii 5 лет назад

7 Days To Die YEAH BUDDY Good for you! Congratulations on getting sober, keep up the great work!

@robc5955 5 лет назад

7 Days To Die YEAH BUDDY ooops not like me to put me size 10s in it, sorry my friend, well done on the abstinence - nice coffee then.

@7daystodieyeahbuddy919 5 лет назад

@@robc5955 It was a perfect day with or without a beer. Cheers

@allgonquin 5 лет назад

As a DIY'er I too have spent longer on connectors than the main job on various repairs. It can be incredibly frustrating. I think there should be a web site devoted to how to undo all the different kinds of connectors on different brands of vehicles. It could be a wiki, where everyone contributes. I think that web site would have tons of traffic if word got out that it existed!

@mikef8745 5 лет назад

“AND HE WRITES” Love your vijayos, and love the New York Patina! You’re awesome and keep up the good work, “LOVE ALWAYS”

@fightingfalconfan 5 лет назад

I wish you were in my town; I would instantly apply at your shop for an apprentice. Learn from the master. But I guess this is the next best thing.

@russellledbetter3121 2 года назад

This helped...big time! Had to perform both right and left hub bearing replacement and while I was in there replaced both shock struts - the old fationed way. Removing the spring from the old struts. Anyway your video helped me save well over $1000.00 dollars. It's truly amazing the mark-up on this kind of service. Thanks again! 😊 Keep up the great videos, you're making a positive impact, and that's commendable. 👌

@gibbsmeedat3954 Год назад

Thanks for the video. Just did my driver's front bearing on my 2WD. I couldn't fit my impact behind the hub, but maybe I didn't turn the wheel enough. It was easier than I thought to use a breaker bar on the hub bolts and caliper torque member bolts. Got the speed sensor clip off with a small needle nose squeezing from the very top. To bust the hub loose I hammered from behind the hub on the rear side (caliper side) of the control arms, but the other side is blocked by the dust plate. I ended up hammering on a 6" or 9" extension against the back of the hub through the sensor cable hole of the dust plate to get it loosen up.

@TheMHoskins 5 лет назад

Another great video, happy to see a frontier video, tho I might be a little biased being a frontier owner. Being an Okie it blows my mind how much rust you have to deal with.

@callalilycollective Год назад

Thanks for the video. Mrs 05 frontier started making really bad sounds when turning, got it pretty much nailed down to the front wheel hub/bearing. This video helped a ton.

@markiacovacci9420 2 года назад

I've watched several vids for a Nissan Xterra wheel bearing and they all showed the version with the drive axle I found yours and it was the same hub as the one I had for my Xterra. I jacked the car up and it was a cinch. I used hand tools and it still was easy, except for that plug. thank you

@markiacovacci9420 2 года назад

my next project is the wheel bearing on my 05 Subaru Forrester

@davidnielson5252 5 лет назад

Love when Eric says, "Napa...not a sponsor!" Not sure why but it makes me chuckle every time.

@rickh6963 5 лет назад

I see all the rust on the cars you work on and it reminds me how lucky we are in the south. I bought a 1987 BMW 325i for autocrossing and it had zero rust on it. If that thing were a New York car it would have been to the crusher many years ago.

@apexkeeper 5 лет назад

I've been using the CRC green (non chlorinated) for years... Never had a can spray like that! Im lucky if half the cans in the case even have nozzles. Rant over, awesome video once again!

@thermobollocks 2 года назад

It's apparently PowerSquirt technology or something

@NicholasBrownC 5 лет назад

Good 'ol Nissan Fontier. I had a lot of trouble undoing that same clip on mine when I was installing the lift kit. Seeing you struggle with it makes me feel better about it.

@scottyakoubian9238 5 лет назад

The brake clean looks like a friggin’ firehose!

@fascistpedant758 5 лет назад

I don't think it'll extinguish fires.

@JenniferFuchek 5 лет назад

You can spray a vehicle across the shop!

@scottyakoubian9238 5 лет назад

anti chuckle I’ll give it a shot and report back.🤕

@paulkirkland1535 5 лет назад

My thoughts exactly. I've never seen a can of brake clean shoot like that before. Wonder if it's a sales strategy? Oh well as long as it works. Happy belated Valentine's day to you Eric and Mrs O.

@davestout8471 5 лет назад

Just got to that part. Holy hell it is a fire hose.

@Illtakewhatsleft 5 лет назад

Big Nasty and CRC brake clean make the world go around. Beautiful video!

@piqua793 5 лет назад

Glad I'm not the only one you had a fit getting that wheel speed sensor unplugged. Took me longer to get that unplugged without breaking it then to replace the hub.

@mattmaryan1121 5 лет назад

Yeah, how many times have others been let down by leaving your comments & criticisms? It's all about the Advertisement money now Eric. Sure, you're going to have a criticism about what I say. Charging more money then you know what to do with is bullshit. You want to impress me? Give every single dollar back to your community. I think you are about the man who would do this. You still have my support. Eric, you don't require all these other shogun auto repair guys showing you anything. You are the best I've ever seen! I mean that! You and Mr's O love people and that is evertything!

@DeatGaming 5 лет назад

Nice and early to watch Eric O show his masterful ways of dealing with cars.

@elcheapo5302 5 лет назад

I'm almost disappointed that bearing didn't put up more of a fight. lol. Thanks Eric!

@charliecummings9514 5 лет назад

I have watched a hundred of your videos and if I ever own my own shop I would have my big nasty but every time I used it I would have to Blair that music you are the man

@mikevonkleist6767 5 лет назад

Eric, I was waiting for the air hammer. This tool works. I align cars with this. Frozen tie rod nuts. I cheat, it's how I bust tie rod ends and ball joints. Carefully.

@robertdavis6708 5 лет назад

Love the smell of Fluid Film! I spray it on my biscuits and gravy. lol.

@codyjohnson1982 5 лет назад

Eric O with the noisy bearing! It's rare that I get any shaky bearings in the shop. They're usually just noisy with no play. I hate those...

@therealchayd 5 лет назад

Had a similar issue on mine; noisy as anything, but no play, and no noise with the car in the air and no load on the bearing. A set of chassis ears clipped on each bearing carrier and a quick test drive soon pinpointed the culprit. When stripping the bearing down, there were two massive divots in the ballrace. Probably thanks to all them winter potholes.

@timidater4803 5 лет назад

ya mine are always pretty tight but noisy as hell!!

@seantaray7180 5 лет назад

I recently bought my own "Big Nasty" to use here on the farm... My daughter saw the box and wanted to know what is in it.. .. told her it was an air hammer... as I opened it up.. told her it had a nickname ":Big Nasty" her eyes got big... and she said " I call it Big Beast" .. .. yeah I almost cried .. oh and she is 10 !

@rdman5465 2 года назад

Followed your video, got my new wheel bearing installed without problem. Thank you Sir !

@sbellock5 5 лет назад

I really enjoy the videos with air tools over the electric ones.

@mysock351C 5 лет назад

Those new CRC cans are pretty sweet! Only sprays for 10 seconds but bet your bottom dollar whatever's on the business end will be clean.

@bill3641 5 лет назад

Looking at the suspension parts in general but specifically the lower spring plate on the strut. I would have to ask " Where the Flake did my truck go ? " Nice job.

@TheTheomax 5 лет назад

You make the most awesome video's for all of us in youtube land to enjoy. And that's a fact Jack or Jane depending well we will just leave it at that.

@isorozco511 5 лет назад

SMA is my valentine cause I love this channel

@davidburke3802 5 лет назад

thats such a great way to loosen those hubs from the knuckle. i've done this once and had to use the ratchet extension and the steering rack press trick.

@zoltank.9757 5 лет назад

Not that I don't appreciate the scantool/diagnostics vidoes but I like this sort of videos better.

@conundrumconundrum5589 5 лет назад

Eric, is it just me or could that have used new ball joint and tie rod end? It seamed to me there was still a lot of movement in that tire.

@SavvyWizard 5 лет назад

I admit when he said go to go. I backed it up to watch again and still went ummm looks like still got lots of play

@joannadavignon1608 2 года назад

You remind me of my dad replacing vehicle stuff 👍🏼

@joelopez40oz23 5 лет назад

You cut the ABS wire like a BOSS

@SgtCude59 2 года назад

Cool video thanks now I see what’s Involved in changing them from Byrnes thank you a lot

@dskirkpa55 5 лет назад

I've just sat down with cuppa and sandwich to watch a professional at work. It looks like another day at the office for Mr. Eric O. But as always a great vid and thanks for the great entertainment. Stevie K

@TheDaf95xf 5 лет назад

Fantastic sat at home 🏡 on my settee watching Eric O fixing motors lol 😆 Added bonus brake cleaner 👍🏻🇬🇧

@hottlimited 5 лет назад

Yourthe best mechanic on RU-vid sir !

@frontspring1 5 лет назад

That move at 2:30 was just pro.

@BigBassChasin 5 лет назад

I seen you in a magazine at my work and I’m all the way in Alabama keep up the amazing work brother

@donparker4244 5 лет назад

Been watching every day for months now. Every day I kearn something, If it would get cold enough here in SC I'd order a sweat shirt from ya! Lol!

@tiporari 5 лет назад

Love those modular hubs. Hate replacing old school bearings. Four bolts and a toot of brake clean is the way to go.

@bighurk30able 5 лет назад

13 minutes real-time people this guy is good 👍👍

@therealchayd 5 лет назад

Doing a wheel bearing on mine tomorrow. Watching this to get psyched up for the job,. Don't have the benefit of a big nasty so probably gonna take a liiiiitle bit longer...

@wkdravenna 5 лет назад

@@DontCryAboutIt love the bfh

@anthonymason701 5 лет назад

Grab a second... two BFH always better than one

@SavvyWizard 5 лет назад

Slide hammer works good as well most times. Most big parts houses have a loaner.

@troybowman140 2 года назад

Glad to see I'm not the only one who struggles with electrical connectors! 😁

@fascistpedant758 5 лет назад

Now that's entertainment! Happy Valentines Day to you and the lovely Misses O. But what do you get a girl who already gets all the brake cleaner and donuts she wants?

@7daystodieyeahbuddy919 5 лет назад

Ice Cream

@fascistpedant758 5 лет назад

The bucket might be empty by the time she got it. Mysteriously sucked dry by some unknown creature on the way back from the store.

@HamiltonLandWorksLLC 5 лет назад

Awesome. That new brake clean has got some serious power.

@RyanHull76 5 лет назад

That was a beauty! Thanks for the new "Fire Hydrant" brake cleaner. Hope she makes more appearances! lol

@mysock351C 5 лет назад

I changed one of those on my car cause a seal failed and even after just a few years I still had to beat it off with a 5 lb. hammer. Amazing how fast things rust and corrode in the northeast.

@Jim-ie6uf 5 лет назад

I sure would like to see Ginger Lee. She gets around a lot! The girls been in Mustie’s and Aimese’s place , too. There is no limit to the number of right uses for the wrong tool.

@gs7865 5 лет назад

Hose pliers are the bomb.

@eaglewhitefeather0183 5 лет назад

Surprised it didn't shimmy itself to death. Good work man. You have the same discipline that my father taught me when it comes to doing a good complete job and taking care to do it right! I don't trust nobody to touch anything on my ride but if I was dying, I would trust you with it...well, yeah, well ok. Just you though.

@vinmarz 4 года назад

Best viewing angle of all. 👍

@aleblanc3547 5 лет назад

I bought some of that Fluid Film for the first time and I see what you mean about lovin' the smell of that stuff. Thanks Eric!!

@montestu5502 5 лет назад

The job that took you about 10 minutes would take this DIY’er about 3 hours.... Very impressive. I never would have thought to remove the entire caliper assembly at once. Now I will....

@andrewsickau8978 5 лет назад

I like how you handled the abs sensor. keeping it real

@zx8401ztv 5 лет назад

Dam that spray cleaner was at warp 9 :-D That bearing didn't stand a chance against you lol.

@davidhollfelder9940 5 лет назад

I bought those wizzy wheels you demo’d on another video .. awesome .. they’re also great for scraping paint/prep for painting the house too.

@edwardsabo8368 5 лет назад

The Big Nasty & The Air Compressor!!!! Awesome video!!!

@planetwisconsin9901 5 лет назад

"It's from the future." Made me laugh! 🤣

@brianbrundage3116 5 лет назад

Thanks for the new video. I hardly ever watch tv anymore

@cubleycat 5 лет назад

SInce watching your videos I have bought one of those wond lights and a chinese copy of big nasty, both very good tools. I am so jealous of how many tools I see in American workshops that we dont have here in the UK! I was surprised to see the unit comes with the ABS sensor!

@bjbeardse 5 лет назад

Just finished a Right front Hub, Caliper and Hose replacement on a 2003 Explorer. What an adventure that was. But as it is a souther vehicle, NO CANCER!!!! Lulz!

@SSMan-jo6tf 5 лет назад

Okay,I’ll ask again,WHO gives a thumbs down on an SMA video!?

@teacfan1080 5 лет назад

You are the fastest air gunner in the East!

@robinlance 5 лет назад

Hello Mrs. O Hope Mr, O Take you out to a Nice place for Dinner...Happy Valentines Day..

@KobraVI340 Год назад

Plan be should have been plan A for that clip. Lol great video

@VoltageDropDiagnostics 5 лет назад

That was sucking some gravy! I bet you don't see many rear wheel drive only trucks up there. It's pretty rare to see one here in Pittsburgh.

@louisiovino2025 5 лет назад

Glad to see you back at it I learned a lot from your video.

@stacydornan9765 5 лет назад

Pretty simple job there Eric,nice to see some gravy once and a while eh

@MTTech 5 лет назад

That Brakleen "PowerJet Technology" they weren't kidding!!

@ChiralSpirals 5 лет назад

You sir are the most southern sounding yankee I have ever seen. Whats up with that?? Love the channel man.

@claytonfite3197 5 лет назад

I'm a big fan of Break Clean and love watching Big NaStY take care of business. Turn it up Eric

@steveorshon 5 лет назад

The big 2.4 lol! Loving Big Nasty's soundtrack.

@orville58 5 лет назад

I love the way you add the perfect music for the scene not only educational but entertaining too lol. The big nasty would have taken care of the connector 😏

@chevyboss97 5 лет назад

If only there was a mechanic like you in northern California.

@michaelb4060 5 лет назад

Congrats! Finally a job that didn't consist of you fighting the rust for hours on end until you are completely exhausted and screaming Yo Adrian. Hopefully you made a few pennies on this one. Nice eyes and ears for the Big Nasty! Safety third. I saw Fluid Film in a Lowes in San Diego. What? Rust and mosquitoes don't exist here. Why do we need Fluid Film here? I don't need a Big Nasty, but I really want to get one from your Amazon store, because it is awesome. One day I will...after I get a few Nano's. Stay classy Dr. O & Mrs. O & the little O's.

@matt.604 5 лет назад

You need a sheep sound for Fluid Film. (lanolin)

@fascistpedant758 5 лет назад

Bahah, not really.

@DD-DD-DD 5 лет назад

I second this. A short "Bahhhh" would be hilarious

@yepblaze9977 5 лет назад

I thought of using a heated (hot laquer) sprayer with melted beeswax.

@rightlanehog3151 5 лет назад

I think a brief 'chorus of angels' might be a better audio cue for the saving grace embodied by Fluid Film.

@KenLyns 5 лет назад

Myth. It's refined petroleum: ihiqa2kjxfb4dhp9872la1cm-wpengine.netdna-ssl.com/wp-content/uploads/2016/07/SDS_Aerosol.pdf

@jimclifford1241 5 лет назад

Another excellent video Eric!

@mikechiodetti6737 5 лет назад

Brad V I may be doing just that. With all the rain we're having, and doing this at home, I'll check it soon.

@kingfish9764 5 лет назад

Eric O, you make it look so easy, nice job. Need to go and buy a supply of Break Clean.

@TheInvisibleOne1026 5 лет назад

Sound effect with brake cleaner had me LOL!

@thesteveprichard 5 лет назад

My old big 1.9 had the same problem. Isuzu. Super fast hands on grinding! Crappy sounding piece of plastic/sheet metal! If ONLY we could move you and the girls down to Odessa, Tx., you'd be richer by now!! Get videos! Keep it going..

@robertpelletier1884 5 лет назад

thanks again, wish it had of been a 4 wheel drive since I have this to do on my Nissan....I just know it isnt going to be this easy...Bob

@onffxiimanon 5 лет назад

Eric O. Quote of the day "Two-Wheeler Peelers"; I love it :)

@jasoneyes01 5 лет назад

Hub puller slide hammer works good also to pull bearing out of carrier.

@davescruton2829 5 лет назад

Eric O and his entertaining style goes hog wild w the torque bar.

@Tman0517 5 лет назад

If theres anything I learned from watching this channel, FLUID FILM EVERYTHING.

@onenikkione 5 лет назад

EVERYTHING, even the rotors and exhaust and.....?

@Tman0517 5 лет назад

@@onenikkione didn't say you couldn't use brake cleaner afterwards

@hsttrek1 5 лет назад

I've always wondered if it reduces the lug nut torque since the studs are getting sprayed..??

@Tman0517 5 лет назад

@@hsttrek1 I doubt that

@rimmersbryggeri 5 лет назад

@@hsttrek1 It increases the torque since you need less effort to tighten them.. some instruction books will give you a specified torque for dry/lubricated. But for lug nuts it's usually either or.