Nissan Titan Starter Replacement (2004-2015)

Подписаться 56 тыс.

Просмотров 368 тыс.

50% 1

If you have found this video helpful, and you wish to donate to me, follow this link!! its easy!!
paypal.me/aaronhinesauto?loca...
Follow this channel on twitter for the latest content updates and weekly Automotive Tips!!
AutoHines?lang=en
In this video I show the steps and procedures necessary to replace the starter on a Nissan titan. Years 2004 through 2015. If you have a Nissan Armada or Infiniti QX56 quip did with the 5.6 L V8 engine these procedures will be the same. This starter replacement is a little more difficult than your average vehicle, unfortunately the intake manifold is required to be removed in order to gain access to the starter. This video shows the steps in tips to get the job done easily. Below are a list of tools and parts that you will need when replacing the starter. I hope this video helps you out if it has please like and subscribe. If you have any questions or comments feel free to leave something in the comment section. Thank you for watching
OEM starter
amzn.to/2ZkIBpJ
Intake manfiold gasket
amzn.to/2GqfHvs
Fuel disconnect tool
amzn.to/2GqfIQ2

Авто/Мото

Опубликовано:

3 фев 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 379

@BluePlanet470 3 месяца назад

My 2004 waited 20 years but it finally got me. Your video was spot on. Thanks for the help.

@sporttrac4x2 27 дней назад

what is the milage of your titan? i have a 2005 with 96k miles and thinking to do it before it got me >.

@BluePlanet470 27 дней назад

@@sporttrac4x2 105k.

@mikesalazar4068 3 года назад

Just finished replacing the starter on my 05’ Titan. This is the biggest project I’ve ever taken on by myself. I felt confident after watching this video. Great instruction I appreciate you taking the time.

@marcomarcello3337 2 года назад

I left mine to the pro's...my shop only charged me 302.00 for new starter and 350.00 for labor...I have 2 herniated lower disc's...ugh!

@marcomarcello3337 2 года назад

Yeah I just finished watching a video showing you how to reset the flashing airbag light...save some bucks there woo hoo!

@august88837 2 года назад

How long did it take u , tm wise

@farmer8102 4 месяца назад

I'm about to be doing this job on my 05 titan. It looks pretty intimidating but at the same time it looks pretty easy, how long did it take you to do yours?

@gmanbeavis Месяц назад

After I replaced the battery and the alternator within the last 4 months my starter decided to go on my 2013 Pro-4X. Thanks for the video.

@apum3000 Год назад

This is a great tutorial for the DIYer. I did it on my 2010 Armada. Just one tip: It is unnecessary to remove the fuel line and the booster line. Both have enough slack, and you can carefully lay the intake sideways to the right. Save yourself time and money.

@williamriker4889 3 года назад

So much for the days of going under the ride and changing the starter from bottom. What a pile of time and work with the newer models!

@jaystax8370 2 года назад

agreed

@muckenputchy Год назад

This has to be the best mechanic instructional video I’ve ever seen. So simple and to the point. Thanks so much! Great job

@jasoncyphers4265 Год назад

Thank you 🙏 just finished my wife’s starter …years later you’re still helping people 🤙🤙🤙🤙

@wbrian507 5 лет назад

If you have to do a starter on a Titan/Armada watch this video! Aaron, you have yet again saved me a whole lot of time and frustration. I believe this is the fourth video that I have used to repair my Titan. Thank you again for taking the time to produce these videos. Keep the Titan content coming! I’m sending you some $ for your help.

@atx-cvpi_99 3 года назад

Toyota V8s with the timing belt are the same way.

@michaelmiller5382 3 года назад

Aaron I’ve wrenched all of my 50 yrs of life I also do restomods but it’s really nice to be able to watch an extremely well done video on with excellent tips and instruction on these newer vehicles from some like yourself I could have figured it out on my own but you saved me so much time by showing the job with all extra tricks

@ericedwards8902 4 года назад

This is my go to guy for working on my Armada! I feel confident that if I follow his instructions I can do a lot of the work I need to on my car! A life saver and a $$$ saver as well!

@Liza-cb3mx Год назад

my dad passed in 2021, i'm gonna use this video for reference on how to fix things, as a way to get closer to him. thank you.

@dawnbackus6652 2 года назад

Awesomeness! I have no experience working on vehicles but thanks to you ! I replaced my starter in my 05 Titan in 4.5 hours all by myself a few months ago following ur video ! Thank you ! Now I need a video on replacing my belt tensioner & idler pulley !

@partytimexxx8931 2 года назад

Idler pulley is literally only the one bolt holding it in. Same with the tensioner. Sometimes tensioners have 2 bolts to either side but get your new part and check your bolt pattern. Then righty tighty, lefty loosey. Easy peasy. Best of luck!

@dawnbackus6652 2 года назад

@@partytimexxx8931 it was my belt tensioner that was making noise removed the belt 3 bolts put belt back on no noise ;) thank you though !

@partytimexxx8931 2 года назад

@@dawnbackus6652 awesome. Glad to hear you got it sorted. 👍

@JC_Mexicano_En_South_FL Год назад

Just finished the job! You’re amazing for this video man saved me some serious change by doing it myself!! 💰💰💰 It took me 5 hours start to finish because it was hard to break the starter bolts. Anyone can do it guranteed just have a heavy hammer to break those 2 starter bolts or a swivel wrench like his. Also, I did not disconnect the fuel line like I saw someone else say in the comments, it does have enough slack 👍👍👍 Amazing video 10/10 5 star thumbs up for sure

@keithpelletier8709 Год назад

This video was extremely helpful, I swapped out my starter but it didn’t go nearly as smooth as it did in the video but it allowed me to get out of my comfort zone and make the repair! Thank you!!

@callanjay Год назад

My son and I just finished this job on my 2005 Titan. Your video was indispensable! Please find a gratuity from me in your PayPal account and spend it wisely, like on a 6 pack of decent beer. Thanks!

@armyant9163 3 года назад

Good video! Sweet and simple. No rambling and no crazy elevator music

@joelh3364 3 месяца назад

Aaron - you channel rocks for titan owners. You have alot of content for those - appreciated!!!

@urbangearhead1270 2 года назад

Prefect diagnosis - replacing the starter did the trick, your instruction was spot on.

@brucedutrow1165 2 года назад

Aaron thank you very much for posting this detailed video. This was so helpful and it saved me $700 from having a local mechanic do the job for me again thank you very much for posting this video.

@michaelpeebles3490 2 года назад

Easily the best video concerning this procedure on the Web. Well thought out and very detailed!

@wisecitizenry2844 3 года назад

Great video! And above all great mechanic! The attention to detail puts you above and beyond! Thanks again!

@HelloMoto1991 2 года назад

Just replaced mine yesterday and thanks to this great video, it was a success. Thanks.

@martinfahey248 Год назад

Thank you, Aaron. Love watching your videos. You make it look so easy....and it is once you are shown how it's done. You have saved a lot of us quite a bit of money. Thank you again.

@x4tfxChallenger Год назад

Just replaced my starter in 2006 Nissan Titan thanks to your detailed video. Much appreciated🫡

@narcisoracoma6621 2 года назад

Very thorough video! Tools needed and even size of sockets used! Step by step instructions makes this video diy friendly! What i like best about this video was the explaination to avoid unecessary removal of other components...Five stars brother!!

@snooze6137 2 года назад

Took me 2 hours but I saved a bunch of money doing it myself. Thank you for the video brother 🙏🏼

@hollywoodperez 2 года назад

Thank you Aaron! I sincerely appreciate you taking the time to do this video. I would have never dared to try this without it. I successfully replaced the starter in my 2011 Titan. THANK YOU!!

@ivanpalomares3940 3 года назад

I followed the same instructions for my 2008 Nissan Armada and now starts like a champ. Thank you so much! great video.

@chriswithrow4166 4 года назад

Replacing a alternator on a 2015 titan S tomorrow, look's like it's going to be as much fun as this. Great Video!

@staybaked1224 2 месяца назад

Thanks for making this video on behalf of myself and 354k others. We appreciate you !!!!!

@rockywilson750 7 месяцев назад

Got my 1st gen at 68k miles. It's now pushing 220k.. I'm dreading the day I have to perform this.. Thank you for the video

@apscheerer 2 года назад

I just replaced my starter in an 06. Your video was my guide, thank you. Saved tons of money!

@gtjman1 3 года назад

If my dad can make it here with his Titan, I feel much more confident that I would be able to do this job thanks to this video! Really great work!

@MrSim-ny4td Год назад

Just replaced the starter on my '08 pathfinder thanks to this tutorial. Much appreciated!

@RickHashimoto 3 года назад

Thanks for the great step by step video. I'm going to replace my starter this weekend. If not for this video I'd take it to the mechanic.

@jessedamian4869 4 года назад

I did my fiance's 2005 Titan. Your video was right there with me from start to finish. I hope you continue to post these kind of videos. I would definitely invest in a power ratchet. I did mine by hand and am no spring chicken. Lol. Thanks again.

@johnfultz618 10 месяцев назад

I always try to find a video on whatever I’m working on even if I know how to do it. Find out everything I’ll need and usually some shortcuts. Thank you for this video. Now I’ll get ER done!!

@khalidsalman7008 2 года назад

Great tips and very clear steps, thanks Aaron for the efforts making this video.

@Ezxhaton 3 года назад

Ended up having to take off the cowl to do this - the bolt on the rear passenger side of the intake rounded off. It was slightly easier to access that way, plus i did a lot of stuff laying on the hood, which was much more comfortable. Appreciate the video!

@dangoody7696 2 года назад

This job looks so nerve racking. Don’t want to mess up. This video with your expertise and explanation makes me confident. Don’t want to spend 6-700 dollars on a job I can do myself.

@ThaInphamouzKane863 2 года назад

I must say, you are very detailed, and precise with your vid’s. From now on, I will watch your vids, instead of watching others who babble on and on. Great Vid 💯💯💯💯💯👏🏿👏🏿👏🏿👏🏿💪🏿💪🏿💪🏿💪🏿. Keep up the good work

@partytimexxx8931 2 года назад

Never done a starter like this but I'm very savvy when it comes to mechanics.this video helped set me on the right track to get me going. Took me about 2 hours to do. Thank you for your upload!

@jimjones5077 4 года назад

I just recently purchased a 2008 Titan 2WD King Cab SE. I like to do a lot of my own work. Fortunately, I don't need a starter. However, I have looked through many videos on YT and yours are EXCELLENT. I have subscribed. Thanks for sharing your knowledge.

@omshutti 3 года назад

Awesome video, made my starter replacement a piece of cake ! Thank you 🙏

@mariohjr84 4 года назад

Going to work on my 05 titan tomorrow this is was a big help thank you

@jmanc6941 2 года назад

Thank you for making this video. I have the Armada and had to replace my manifold gaskets. The vid made it less daunting to do!

@spaznothingyet10 Год назад

Fixed my 05, thank you for the easy step by step guide.

@BunkSanders 2 года назад

I was calling shops to have this done and came across your video. After watching I thought I could do this. Just finished up and truck is running! Thank you so much for this video!

@vicram2021 2 года назад

When you finished did you happen to spill some fluid near the manifold? Cause I did and when I started the truck up some white smoke came out and smelt burnt so I don’t know if I messed something up or if it was just burning the fluid that spilt

@trumpeteer4792 5 лет назад

Hey thanks for putting out a great video. You never need it 'til you need it ! Glad to find yours. Also glad to see your power steering reservoir covered w grime as I thought I had a leaky cap lol

@mastertechnician3372 2 года назад

I love it. No pep talk. Strictly business. That's the way to go.

@13polouno 2 года назад

Very helpful, much appreciate your simple steps to get this job done quick and easy.....👍

@leodonnelly5427 8 месяцев назад

Thank you very much. I just used your guide on my '08 Titan. Took me four and a half hours.

@alramos292 4 месяца назад

Aaron, I'd like to thank you so much for your "how to" video. I had been putting off the starter replacement because of its location. Your helpful comments and shortcuts allowed me to confidently replace my 07 Armada starter. I appreciate you sir!

@aaronkowalewski659 Год назад

Thanks for this video! I watched to see your method of removing the intake manifold. I'm planning on grafting an ls7 snout onto my manifold. Disconnecting the evap hose and unbolting it from the bracket is so much quicker. A ton of other videos show you leaving it on and dealing with extra nonsense to deal with. I always watch your videos before tackling a project with my Titan. Thanks for these videos!

@Drewfvalencia 2 года назад

Great video just changed mine today and your video was very helpful every second

@raymondshack4212 Год назад

Thank you very much for this video. Im glad I don't have to refer to manual like my grandpa had to

@stevenlsobel 3 года назад

Just finished my second job using your helpful video. It took me a while, but I have a new starter. Make sure you use plastic fuel line removal tools! But great video.

@unclewaggy09 2 года назад

Great video. Just used it step my step to replace my starter. Whoever came up with the placement needs to get kicked in the plums. Again, good job!

@grampy2004 4 года назад

Thanks for the great video without annoying music . Great sound ; )

@edwingalo555 4 года назад

Great video!! I just got done with my truck!! Thank you!

@brettmclean3113 2 года назад

Thank you so much for the video. Just completed a 2012 and you are right, Caught hell with the breakaway torque from the factory on those two bolts, with no leverage and a wrench. A 14mm dog bone would have been the ticket. Thanks again!

@torredrakeford7825 Год назад

Great video! I watched a couple others but this was by far the best!!

@innovativethoughts 8 месяцев назад

Very good video. It was a few bolts in the back which was a little hard to get but if you get that far a person will know what to do. Thanks for taking the time to make this video. The operation was very successful.

@kaylapeterson6880 2 года назад

Wow! You are amazing, thank you! I took this on myself with your guidance. Started up right away! Took me 6 hours but I feel so proud and accomplished. Know that I appreciate you. Honestly couldn't have done it without you video.

@donaldwhitaker1433 11 месяцев назад

Just replaced my starter on my 04 and this video helped a lot thanks for sharing

@KrimsonApoLLo Год назад

You’re awesome man. Im pretty much doing a titan restoration and your videos are always perfect: straight to the point, thorough, and extremely easy to follow.

@williamdew6137 3 года назад

I’m going to replace mine on my 2008 Titan I really appreciate the video you made I’m gonna save this if I run into a problem I will inbox you

@veteransforequality7347 3 года назад

had to look at this video because it's the same on our 2008 nissan armada.. so much work. my 84 silverado was just so easy

@williamlynch3987 3 года назад

GREAT video Aaron very precise I have a 2010 this weekend ...Thanks ...

@sam-merc 4 месяца назад

Great video, thank you sir for putting this together. You explained the steps very well and kept the video short without leaving out too much detail. I'll be sure to look out for your videos when doing repairs. One pain we ran into was that the fuel line took a long time for us to disconnect it with a brand new tool. Hopefully after the tool gets some more use, the plastic will get shaved down a little to give more room for the tool to fit and disconnect the fuel line.

@wrenchin7751 4 года назад

Best video of this job yet. Thank you so much. Will be doing this using your video for play bu play

@AaronHinesAuto 4 года назад

Awesome! Thank you!

@ceo5779 4 года назад

@@AaronHinesAuto how do you start it to clean the fuel rails if the starter is out?

@S8LAD 5 лет назад

Thank you for sharing this video! My Armada is having the same symptom.

@yasharisrael1319 4 года назад

Mine is doing the exact same thing I have 187000 miles on it

@marzelldean7918 2 года назад

I must say you the best I did my mom car you most definitely help me save money keep up the good work

@BMGProjects 6 месяцев назад

Thank you! I just replaced my starter with your video guidance!

@PontiacFreak 3 года назад

Nice video, made mine easy to replace. Thanks!!

@mtbjunkie247365 Год назад

Well that was fun. Not too bad. Thank you for the video to prep me. I ended up not removing the fuel line and just setting the intake on its side to the right, carefully. 😁

@cfdlglenn 5 лет назад

Very clear instructions. Keep up the good work. Now, I'm going to go replace bad starter on my 04 Titan. Thanks

@AaronHinesAuto 5 лет назад

thank you for your support!

@cfdlglenn 5 лет назад

Fixed my truck. Directions worked great.

@cfdlglenn 5 лет назад

@@michaelmartocci5149 right, first time I have ever seen one on top of the engine.

@kelvinglover1807 3 года назад

Z jazz

@smileykneez 3 года назад

Thank you, sir. Great instructional video - wonderful detail and great tips! Well executed! I hope that you are paid handsomely for this.

@AaronHinesAuto 3 года назад

Thank you for the kind words glad the video helped you out

@smileykneez 3 года назад

@@AaronHinesAuto You are welcome - it was a Godsend! I am about finished with the job and it has gone very well.

@yasharisrael1319 4 года назад

Man that's was very clean and detail good job 👍👌

@sflb83 Год назад

Great video my man! Everything was very well explained!

@themusiccenterofnorthhaven6242 2 года назад

Thank you Aaron for an Awesome Video! I have a 2005 Infiniti Qx56 with the same motor. Your video was a life saver and a time saver! Thx for all the nut size references. If I may add a couple of tips.....When putting in the intake manifold bolts, I used a Flexible 36in Claw tool Grabber and placed the 4 hooks over the bolts so I wouldn't lose them and it worked great! Also, you were right about using a 1/2 ratchet but use the long, flexible head style. You will now be able to take the stupid bolts out with ease! Lastly, WD40 did nothing but I switched to Liquid Wrench and OMG, it worked within 15 min! I did change the gaskets also. Once the starter was installed, it was easy, peasy to put it back together. Best yet? It saved me $800 bucks by doing it myself and it starts right up! Thx again!

@JavierRodriguez-xw8gd 2 года назад

Followed step by step. Turned out great

@SMRo7 2 года назад

Great video, its the best! Step by Step, I'm doing it. Thank You.

@mc8305 4 месяца назад

Thank you for this video I feel I can tackle this job now ! Thanks for sharing

@fernandoramosrolon7748 4 года назад

Great video im getting ready to replace mine's this upcoming weekend

@EduardoGonzalez-oz5mo 5 лет назад

Just finished replacing mine. Followed ur instructions as shown, if i can do it anybody can.

@alejandrayepez4961 4 года назад

Hola

@alejandrayepez4961 4 года назад

Oye que fuel size usastes

@Iraqveteran-ke6qu 4 года назад

I’m taking mine to you.

@user-jb9lb5oz9g 4 месяца назад

Seems to me very informative and detailed. Thank you for posting this video.

@mrtsautoxpress5752 2 года назад

big props to you on this video, well done .

@MrAzwood 3 года назад

Thanks for the help. Got it done no problem.

@zacharyrainwater750 6 дней назад

Your videos are great man. I just bought an 05 with 170k, but it has the crank no start condition. Everything I've fixed up to now hasn't fixed it, so this is my next project. I bought a starter from Amazon (high rated company that was selling it) so now I get to try this in the parking lot of the shop it's sitting at and HOPE it fixes it.

@mikegeer5185 5 месяцев назад

Great step by step video/explanation. Thank you !!!!

@boogerhead0 2 года назад

11:17 Word to the wise: Verify the length of the solenoid wire before installing the new starter. Some aftermarket starters come with the lead about 2" shorter, and it WILL NOT reach the mating connector. So be sure to graft on additional length from old starter, before bolting in new starter unit.

@ryanh.2049 2 года назад

Thank you for the tip, checked mine before bolting in. Also, don’t buy a torque wrench from harbor freight, bought one brand new just for this job and it wouldn’t click at any set torque.

@rubenrivera7384 4 года назад

Thanks for the video. I just did mine yesterday with your video as reference. Except everything that looked easy on video seemed to be a pain in the butt on my truck.😂😂

@AaronHinesAuto 4 года назад

Awesome! Good to hear

@SamGarza 4 года назад

Great video, sent you a paypal tip for the help. The starter bolts were hard to remove mostly due to being so far back and I could not generate enough leverage to break them. After laying across the engine and saying a few bad words I got it. I see you have a lot of great content. I am subscribing.

@AaronHinesAuto 4 года назад

Wow man. Thank you so much! What a blessing. I’m glad you found some help from the videos. Those bolts are no joke!!