Nissan Titan Starter Replacement: 2003-2015

Подписаться 212 тыс.

Просмотров 203 тыс.

50% 1

Brian Eslick from How to Automotive www.howtoautomotive.com takes you step-by-step through the process of replacing the starter motor on a 2003-2015 Nissan Titan.
Affiliate link mentioned in the video for Fuel Line Tool Assenmacher Specialty Tools 8021 Oil Cooler Liner Remover Tool amzn.to/2ycj3RL
Affiliate link mentioned in the video for TYC 1-17867 Nissan Titan Replacement Starter amzn.to/2ieH7Zx
Affiliate link mentioned in the video for Milwaukee (MLW255621) M12 FUEL 1/4" Ratchet Auto Kit amzn.to/2yd6ipY
Affiliate link mentioned in the video for Milwaukee (MLW255721) M12 FUEL 3/8" Ratchet Auto Kit amzn.to/2zAEZlT
Affiliate link mentioned in the video for
MILWAUKEE M12 LED Underhood amzn.to/2h7J9uB
Affiliate link mentioned in the video for Milwaukee 2754-22 M18 Fuel 3/8" Impact Wr- Xc Kit amzn.to/2u1kZJE
Affiliate link for How to Automotive Tool Store www.amazon.com/shop/howtoauto...
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomotive.com/
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: / how-to-autom. .
Google+: plus.google.com/+HowtoAutomot...
LinkedIn: / brian-esl. .
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick. #howtoautomotive #MilwaukeeTools

Авто/Мото

Опубликовано:

28 окт 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 242

@jamesskoruppa8317 6 лет назад

Great Video. This was a great step by step video. I just hit play, pause, play, pause....... until it was done. Fired right up.

@HowtoAutomotive 6 лет назад

James Skoruppa awesome glad the videos helpful. Thank you for watching!

@ericpierce6127 5 лет назад

I’m a mechanic and I change starters almost every day no problem. This is the second time I’ve had to watch this video. Thanks again for the help.

@HowtoAutomotive 5 лет назад

Eric Pierce thank you for watching!!

@moeperry3606 8 месяцев назад

How much do you charge to change a starter on a Nissan Titan?

@hardset-vi3ze 5 лет назад

One of the best, easiest to follow, straight forward, no blah, blah, blah bullshit videos yet!!! Excellent! Keep it up!!! I can't stand all the very poor instructional videos that go off on IRRELEVANT personal information....Newflash!!! WE DON'T CARE!!!!

@vood00samurai 5 лет назад

Man I wish more videos were like this. No BS, no storytimes shit. Just get to the damn point. Cheers to you man

@hollywoodperez 2 года назад

Thank you for taking the time! I learned a lot by watching this and as a result was able to successfully replace the starter on my 2011 Titan. A million thanks again!

@JackieTheTruck 3 года назад

Great video! Very clear and concise, no rambling story like some other vids I've seen ppl post. Thank you for all the work editing and filming to help us out. Also, many thanks for the torque sequence for those of us that dont have access to alldata!

@sregan6569 4 года назад

Just had to replace my starter on my 04 Titan. This video really helped, you did a great job. Thank you

@heisenberg1763 4 года назад

Best how to video i have ever seen. Very methodical and all inclusive. And no extra camera guy

@HowtoAutomotive 4 года назад

Thank you! Did everything go smooth for you?

@hardset-vi3ze 5 лет назад

WOW, i used to be able to crawl under my dodge, ford, chevy and have the starter, which was usually mounted on the bell housing out in about 15 minutes and back in, in another 20 minutes. No removing 50 other obsiticles!! Rebuilt starters were about $35.00. Anchient history!!! Sad.

@504CreoleCrystal 5 лет назад

jack ellenberger man!!! I’ve NEVER had this trouble with my Cutlass or Delta or my Cadillac Fleetwood! I ended up on this video helping my ole man find info about his Titan. WHO ONE EARTH thought this was the best place for a damn starter to be?!?

@elonsus9747 3 года назад

My Pathfinder has the starter next to the bell housing, very easy to access.

@shannonwatson5473 2 года назад

Yep, that's right! Sometimes I miss the good ole days.

@rickh9507 3 года назад

I just knocked mine out today. And its a 2004. Thank you for the awesome detail!

@TattooDawg 2 года назад

Whoever designed this starter configuration should be forced to change them everyday for the rest of his life! Your video was very helpful. Thank you!

@michaelnovelle7680 3 года назад

Just followed these instructions and replaced my starter. Thanks so much!

@randalkendrix6219 4 года назад

Saved me hours of time and money. Thank you!

@jasonluongo526 6 лет назад

Awesome video. Thank you for taking the time to post this, it made it 10x easier to do a job that would have been a total pain in the butt to muddling through. Thank you.

@HowtoAutomotive 6 лет назад

Jason Luongo glad to help. Thank you for watching!

@mustangc80 5 лет назад

Thank you for posting this video. Its a lesson for me to check first the diy videos, so i know what to expect if i can handle it or not.

@ronjon1789 6 лет назад

Great video Brian. I am going to put another notch in my DIY belt this weekend. I will do the same as James and follow the video until it is done. Thanks so much.

@HowtoAutomotive 6 лет назад

RonJon good luck with the repair. Thank you for watching!

@its4jf 5 лет назад

Yes, great video. Saved a lot of money doing it myself. Thanks!

@jasoncyphers4265 Год назад

Thank you ..!!! You and the other guy on here really helped… made it pretty easy… you guys Rock

@oldskoolhoss7534 5 лет назад

I just bought one. Learnin the ropez! Thanks for the vid

@ChrisW-dv1ek 6 лет назад

Super helpful for my friends Infiniti QX56. Not identical, but close enough to be the only reference I needed. Thanks!

@HowtoAutomotive 6 лет назад

HillbillyJim We are glad the video helped. Thank you for watching!

@mcajudoy 5 лет назад

YESSS I just finished installing my starter and they only reason I could do it was because of your video to me your video was edited perfectly... if I took it to my mechanic he said 300. For labor only plus the cost of parts which was 130. Also towing which cost 150. So about 600. For everything now I did buy tools for this job and that costed about 200. But now I have great tools for other jobs that will come up. The flex head ratchet was key to getting the stubborn bolts in the back of the starter. The paper trick to keeping your bolts in the socket is game changer. I'm not even close to being a mechanic but if you have some basic skills this job is due able .....thx for your video totally stoked right now

@HowtoAutomotive 5 лет назад

That’s awesome you saved and got your car going. Glad the video helped thank you for watching!

@notdirtyflics1067 6 лет назад

Great video I really like how you went step-by-step and mention problems that you might run into, thanks

@HowtoAutomotive 6 лет назад

notdirtyflics Glad you like the video. Thank you for watching!

@samnaghoon5907 4 года назад

You are truly a great professional, thanks for sharing!!

@lottzd1 Год назад

You are the man!!! You saved me $500!!!! Great video! Thanks!!!! Very well done and easy to follow!

@frankmartinez9996 6 лет назад

Thank you so much. This video helped me so much to replace the starter on a titan. I agree with the others. Worst place ever for a starter!

@fredymeza6828 6 лет назад

Dude!!! this was amazing., step by step and completed the job ., thank you very very much.,,,, good job., and now to replace Ac blower on the same vehicle lol

@angeljose6261 5 лет назад

Thank you so much for your straight forward no BS video, tells me everything I need to no to avoid any mistakes.

@angeljose6261 5 лет назад

I was able to replace my starter with ease, thanks

@motostinecollective 6 лет назад

Great start to finish video, helped me change my starter 👍

@HowtoAutomotive 6 лет назад

motolifestyle Glad the video helped. Thank you for watching!!

@jamesthomas41 5 лет назад

Great video worked perfectly on my 2011 Armada. Dealership estimate was $900-$1000. Done myself only costed me $177 and 2hrs.

@HowtoAutomotive 5 лет назад

James Thomas that’s what I’m talking about! Nice savings there. Thank you for watching and sharing! Love to hear people saying money.

@CrazyTrainUSA 5 лет назад

Great video I’m replacing mine in the AM.

@ChrisOpat 6 лет назад

Super helpful video, that made this manageable. (It's still the worst starter placement ever, but at least this video makes it manageable!). Really, really nice work on this.

@HowtoAutomotive 6 лет назад

Chris Opat thank you! Glad the video helped and thank you for watching!

@susanlobdill3111 2 года назад

Followed step by step. Not too difficult. Hardest thing was breaking the actual bolts holding starter loose.

@focus5498 5 лет назад

Your video helped me a lot, thanks! Will be in Siberia come to visit.

@scottdykes6897 4 года назад

Thanks and great job of keeping it simple and to the point! 3 hours, some parts and some elbow grease is all it took.

@cireirby5359 Год назад

That is how you teach a class on how to do, Great step by step job

@samnaghoon5907 5 лет назад

Great video, you are truly a fantastic teacher!!

@HowtoAutomotive 5 лет назад

Thank you!!

@audimechanic7050 5 месяцев назад

Thanks for posting this video I’m about to attempt to replace the starter on my truck and this video will definitely help me. But what about fuel pressure? Do we have to release fuel pressure?

@juniormyers5378 3 года назад

Thank you sir! Your video walked me right through every step Perfectly!

@HowtoAutomotive 3 года назад

Thank you for watching!

@neverstoplearning382 6 лет назад

Nice place to install the starter. Thank you.

@TTown-ho1bu 3 года назад

Thanks for the video. Very helpful!

@grimlock_rsv4634 10 месяцев назад

This was excellent tutorial, im doin it right now 8/23/23. Goin to get fuel line tool, ive done everything else! Next take of manifold n get to starter n replace thn work it backwards

@HowtoAutomotive 10 месяцев назад

Go the video is helpful. Good luck with the rest of repair and thank you for watching !

@grimlock_rsv4634 10 месяцев назад

@@HowtoAutomotive excellent tutorial

@grimlock_rsv4634 10 месяцев назад

@@HowtoAutomotivestarter bolts, what size swivel head ratchet u use, i have 3/8 and it aint getn one of the bolts off at all

@billkelley363 6 лет назад

Great video, Thanks for posting. I'm now a subscriber.

@HowtoAutomotive 6 лет назад

Bill Kelley awesome thank you for subscribing. Glad you like the video thank you for watching!

@mtbjuky Год назад

Such a great video!

@allthingsfishing365 Год назад

Great detail, thank you!

@SamGarza 4 года назад

Great video. The starter bolts were hard to remove mostly due to being so far back and I could not generate enough leverage to break them. After laying across the engine and saying a few bad words I got it. I see you have a lot of great content. I am subscribing.

@HowtoAutomotive 4 года назад

Sam Garza Glad you like the videos. Thank you for subscribing!

@victorofrias Год назад

I used a a long metal rounded hollow fence post that I found ling around. works every time.

@markferraro5250 6 лет назад

nice job Brian

@inspiringminds6822 2 года назад

Great details. Most mechanics won’t go the extra mile cleaning everything.

@MrbrentLa 3 года назад

Great video. Right to the point and no B.S. I hate it when people need to talk about themselves for 10 minutes.

@MikeHonchoInPlaygril 4 года назад

thank you very much! very helpful video! you dah best!

@praisehim3288 5 лет назад

Excellent step by step instructions 👍👍👍

@HowtoAutomotive 5 лет назад

Thank you! Did everything go smooth for you?

@praisehim3288 5 лет назад

@@HowtoAutomotive Everything went great, I replaced the starter with no problem and saved about 400 dollars in labor. Thanks again for that amazing video 👍👍👍

@rdb4066 5 лет назад

Thanks for the great video. My starter is turning slowly and needs to be replaced. Changing the oil this last weekend, I was looking for the starter but didn't see it. Had other stuff to do so I didn't take much time to look for it.. Found your video and now I know why I couldn't find it! Did you use a Nissan starter? Would you consider an aftermarket starter? I tried an aftermarket starter on my 2002 Maxima but it didn't hold up and I went with the Nissan part.

@danielgomez19888 2 года назад

I almost paid a shop $400 to do this job but thanks to this video I did it myself and I changed the fuel injectors since they were accessible

@HowtoAutomotive 2 года назад

Nice glad the video was helpful. Thank you for watching!

@funktron4 Год назад

If you have a shop that would have done this for $400.00, you have a great shop to go to.

@danielgomez19888 Год назад

@@funktron4 I wish I had let them do it

@JelloMEX 6 лет назад

Thanks for posting. Its great for reference.

@AdamAndersonRED 6 лет назад

Brian, Thank you for taking the time to do these videos. I am not a stranger to tools/repairs, BUUUuuttt... I absolutely do not know a ton when it comes to my Titan (learning every chance I get). Having watched other videos that sent me down the primrose path of unneeded extra or futile work; I sincerely like your easy to follow and professional instructions. Keep it up my friend. You are really helping.

@HowtoAutomotive 6 лет назад

Adam Anderson thank you so much. Glad to hear the videos are helping thank you so much!

@AdamAndersonRED 6 лет назад

I removed the starter (by the good directions), THEN.. I found my fly wheel is broken. :-( NOoooooooo..... You wouldn't have a video showing how to do that would ya?

@HowtoAutomotive 6 лет назад

Adam Anderson sorry don’t have a video on the fly will.

@richstandish123 Год назад

I just got done with this procedure. Thank you, By the way!! I now have a check engine light on with a high idle. Throwing Mass airflow and lean fuel codes. I replaced MAF sensor and it’s still having issues. We still drive it but it’s downshifting a little odd, etc. any ideas of what this could be before I take it in?

@PaloDuro1021 3 месяца назад

Just finished up my 2004. It’s not an easy job but very doable.

@jasoncyphers4265 Год назад

By the way the paper towel trick worked perfect didn’t drop or lose one bolt!🤙🤙🤙💯💯

@dnguyen240 5 лет назад

Thanks for uploading this video was very very helpful

@HowtoAutomotive 5 лет назад

Glad the video was helpful. Did everything go smooth?

@dnguyen240 5 лет назад

@@HowtoAutomotive everything went perfectly I watched a few videos but yours was definitely the best

@glennalbus363 3 года назад

I was dreading the location when you started taking the airbox off. Good guide though. Will be doing this for my aunt next week

@michaelpoindexter3599 3 месяца назад

Nicely played

@blestjudge385 3 года назад

Great video

@richard66754 5 лет назад

Thanks for posting this!

@HowtoAutomotive 5 лет назад

Richard Bowles thank you for watching!

@ruantecillo2535 6 лет назад

I believe this is what I need...was this truck doing the "clang" sound instead of turning? Is there any way to turn on and test before replacing? Like bypassing the ignition and Just applying voltage to it? Just want to make sure it is indeed my starter

@db4652 6 лет назад

Good video gracias 👍

@darwindropmazda 6 лет назад

Worst starter placement ever🙄

@HowtoAutomotive 6 лет назад

Darwin W Believe it or not I've seen worse

@darwindropmazda 6 лет назад

How to Automotive wow, I can only imagine

@HowtoAutomotive 6 лет назад

Darwin W Porsche has a crazy one under the intake that is like eight or nine hours Labor to replace.

@darwindropmazda 6 лет назад

How to Automotive holy cow

@YUPYUP5able 6 лет назад

My 06 envoy. You have to drop the whole exhaust. And get to it under the vehicle

@jasonaldrich6361 6 лет назад

Thanks for the video Which brand starter do you recommend? I was quoted $719-$850 I can get the TYI starter and manifold gaskets for $125

@daves5932 Год назад

Thanks for this. I tried this on a Qx56 several years ago for an intermittent issue and realize there are two different starters depending on the specific model. I had the wrong one after doing all the work and had to put the original back. About to do it again as it has worsened. Question. There is a lot of carbon build up in the intake ports... Is it worth it to try and clean or is that not a good use of time?

@fernandocorona1993 4 года назад

Great video and understand easy, good

@HowtoAutomotive 4 года назад

fernando corona thank you!

@shannonwatson5473 2 года назад

Very good video! Thank you!

@HowtoAutomotive 2 года назад

Thank you for watching!

@leonardogalvan6079 Год назад

Hi is the fuel line disconnect tool a size 3/8?

@Mojoe713 6 лет назад

Thank help me out a lot

@betocastaneda1597 3 года назад

Hello, good day, could you help me tell me how tight the cap screws are, please, I am going to change the new caps because oil is passing to the spark plugs and I am also going to replace the gaskets that you put

@victorofrias Год назад

1:23. I just cut up a plastic tube i had laying around. worked like charm.

@Johnkim686 5 лет назад

Great Information Thank you!

@HowtoAutomotive 5 лет назад

Johnkim686 thank you for watching!

@ratstarone 5 лет назад

That was a great video, thank you so much.

@HowtoAutomotive 5 лет назад

black amigo did you do the starter and did it go smooth?

@ratstarone 5 лет назад

@@HowtoAutomotive no sir I'm thinking about buying the 2005 or 2006 Nissan Titan and doing a lot of research on repair and everything else before I buy the vehicle. I own a 98 F150 and was thinking about getting a Nissan's I've seen some people say is good and some people say it's bad what are your thoughts?

@bullitt4049 6 лет назад

Thank you for your video . It was very informative , very professionally done unlike some of the other videos where the people were learning how to as they videoed the job. Thank you for the Fel-Pro part number on the intake gaskets , also thanks for the order in the reinstall of the intake bolts. Most of all thanks for the torque specs on the bolts . Unlike the other peoples videos it's plain to see that you know what the Hell your doing . By any chance , do you know why on a 2008 Nissan Altima . I reset the oil life but after a couple of days it shows to change oil again . Any advise on why this keeps happening ? J

@HowtoAutomotive 6 лет назад

james hows thank you. I work hard to make the video is the best I can. As far as your oil light I’ve never run across that problem so I would just keep doing research on line. Thank you for watching!

@travismoore1663 2 года назад

Thank you so much!

@viorelnaidin5933 5 лет назад

Nice video! Thank you!

@HowtoAutomotive 5 лет назад

Thank you and thank you for watching!

@betocastaneda1597 3 года назад

hello to the packaging can you put some sealant or only dry ?????

@danielh2009 2 года назад

Best video

@yardsale781 4 года назад

Thank you. You saved me who knows how many hundreds of dollars

@HowtoAutomotive 4 года назад

Yard Sale always happy to hear someone saved! Thank you for watching!

@NYGIANT6 5 лет назад

You sir saved me about $1200+, I did the work myself follow step by step and the operation was a success, think she's gonna make a full recovery and live a very long productive life. Thanks a zillion

@HowtoAutomotive 5 лет назад

Otto McConico love hearing that you saved. That’s awesome!! Glad the video helped thank you for watching!

@carlosamorales646 4 года назад

Good video

@consultoriajuridicayfiscal4127 6 лет назад

Good information

@HowtoAutomotive 6 лет назад

HERNEST RIVERA thank you!

@ericpierce6127 6 лет назад

Thanks man huge help. Why put the starter there? SMH.... Nissan....

@HowtoAutomotive 6 лет назад

Eric Pierce glad the video helped. Thank you for watching!

@lpd1snipe 4 года назад

Thank you!

@ronbaynes2755 6 лет назад

Great video Brian. What is your estimate on how long this job takes to complete ? Thanks !

@HowtoAutomotive 6 лет назад

Ron Baynes I believe the book time was around 2 1/2 hours it took me about an hour and a half including filming it. Thank you for watching!

@rudyswoodwork7236 4 года назад

I bought a 2004 Nissan Titan brand new I’m the only owner today 2020 the first problem my starter went bad .. 16 years owning my titan no problems until now well after this video I selling my titan

@susanss70spartymix77 Год назад

Damn! 16 years of no problems and now selling the truck because its a 2 hr job to replace a starter motor. I know how you feel. I bought a Model T when they first came out. Last week I had to change the brake pads! I am selling that unreliable junker asap! Sold my house last week too. The bulb in the lounge room burned out! I was like, wtf!!! Why can't we make quality stuff anymore!

@trsencion 4 года назад

I love mechanic work but I’m so afraid fondo this one. Any more tips. How much you think someone would charge me to install one. I have the starter.

@avaldovinos77 2 года назад

Wow right to the point, I wish e could all pitch in with at least $1 so you can keep helping us but with a hands free high def cámara, the least we can do to return the favor is subscribe, done!

@bryanmartinez6600 5 лет назад

The only reason I can think of placing it here is reducing one less step in assembling the vehicle in other vehicles starter has to be installed after the transmission but in this way they would just bolt the transmission to the engine. Also I just bought a 2010 Titan And I was wondering where it was.

@garrettbetty9077 5 лет назад

So thank you for the DIY video. BUT the torque spec calls for 73in/lb which converts to about 6 ft/lb only a few hundredths over. I have now snapped 2 bolt heads when torquing the intake manifold bolts. I am going to upgrade hardware to grade 8 bolts and hand tighten until snug. Then follow with a 5 torque spec then a 6. Any advice on snapping these small intake mani bolts or has anyone experienced the same issue? My truck is a 2006 with 137K miles.

@mxfreaks 5 лет назад

Yep 6 x 12 is 72 so 6ft lbs is accurate since most wrenches can't get to one inch pound accuracy anyways. Good catch, I knew the math was off when he said that but figured doing 7 wouldn't hurt. Thanks for the warning

@808k20a2 4 года назад

Why'd you take of the throttle body? Couldnt you just unplug the sensor and the TB comes off with the manifold?

@gggggeeeooorrrgee 5 лет назад

Word of advice test starter if you buy a rebuilt starter. Nuttin like doing all that just to find out your rebuilt starter is bad

@HowtoAutomotive 5 лет назад

Good tip thank you and thank you for watching!

@brandonblack2095 5 лет назад

i wouldn't even bother buying a rebuilt one just get brand new one oem

@joseorellana2669 Год назад

Thanks!

@HowtoAutomotive Год назад

Thank you very much!!

@Jetmech1085 5 лет назад

Since you have to disconnect the booster line , does it require brakes being bled?

@HowtoAutomotive 5 лет назад

No that line is vacuum not hydraulic so you’re OK

@cesarterrazas429 Год назад

What happens if you don't change the gaskets?

@hectormaldonado7018 3 года назад

Because of people like you; US DIY"s-Save alot of money! You are Second to None; And-Be Assured: That in me, You Have made a New-Accquintenance and Subscriber! God Bless And Keep Up, The Awesome Work! Best Regards Hector Jaime Maldonado, Jr Owner/CEO at: M&I CONSTRUCTION LLC.

@HowtoAutomotive 3 года назад

Thank you Hector! Always happy to help. Thank you for subscribing and watching!