Nitrous doesn’t play well with others! Especially when you have pretty much stock unit.

Подписаться 265 тыс.

Просмотров 602 тыс.

50% 1

Nitrous doesn’t play well with others! Especially when you have pretty much stock transmission. Gonna have to get another transmission just to fix this one, but nothing we can’t handle. We hope you enjoy thanks for watching. 👍🏼❤️🙏🏼
LIKE, COMMENT, SHARE
Links to parts that we install in this unit we built. 👇👇👇
4L60E Transmission Level 2 High Performance Rebuild Kit 1997-2003
amzn.to/2Iz7KsE
GM 4L60E Remanufactured Transmission Master Solenoid Kit Fit For 93-02 EPC Shift TCC 3-2 PWM
amzn.to/32Fp9qY
TRANSGO Transmission kit 4L60E, 4L65E, 4L70E and 4L75E 93-07 Except Hybrid units.
amzn.to/3eSwIzz
WARNING: DO NOT USE 2-4 BAND APPLY GOLD RING WITH WIDE BAND WILL CAUSE TRANSMISSION FAILER
Hi-Performance Servo and Pin Kit Fits Corvette Transgo TH700R4 4L60E 4L65E
amzn.to/35o7AgT
4L60E Forward Accumulator (1.770"OD) (.230"OD Pin) 1993-Up Aluminum Transgo
amzn.to/35sam4G
Aftermarket K77998A Piston, 1-2 Accumulator
amzn.to/36zwYPU
Aftermarket K77998 Piston, 3-4 Accumulator
amzn.to/36LxoTN
Sonnax 4L60E Boost Valve and Spring Kit .490''
amzn.to/3ly9cdK
Transmission Parts Direct (K65927B) 4L60E Pump Rotor Kit (13 Vane) (1997-Up)
amzn.to/32HA5UX
Lubegard 19260 Dr. Tranny Assemblee Goo, Blue, Light Tack Lubricant, 16 oz. amzn.to/3klbJ9C
Some tools you will need links below. 👇👇👇
Streetside Tools SST-0151 - GM - Rear Clutch Spring Compressor Transmission Tool (Low & Reverse) amzn.to/35vFHnj
E-cowlboy T-0220-700R4 Bushing Driver Kit/Tool for GM 700-R4 4L60 4L60E 4L65E Transmission (13pc)
amzn.to/35oFaU0
Streetside Tools SST-1574-Long - GM- Turbine Shaft Teflon Seal Installer/Resizer Transmission Tool
amzn.to/36rz9VQ
Streetside Tools SST-1503 - GM - Stator Shaft Teflon Seal Installer/Resizer Transmission Tool 700-R4, 4L60, 4L60-E, 4L65E and 4L70E
amzn.to/3prOG0o
Streetside Tools SST-1097 - GM - Front Pump Alignment Band Automatic Transmission Tool
amzn.to/3eSV7ou
Bonbo T-0158 Universal Clutch Drum Spring Compressor Transmission Tool Heavy Duty Steel
amzn.to/3kA3arL
ACDelco ARM601-3 3/8” (3.7 to 37 ft-lbs.) Digital Torque Wrench with Buzzer and LED Flash Notification - ISO 6789 Standards with Certificate of Calibration
amzn.to/2GVI49e
Scotch Brite Pads We like: www.amazon.com/gp/product/B00...

Авто/Мото

Опубликовано:

15 июн 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,3 тыс.

@jameskeller1707 4 года назад

85% of the reason I'm here is that as a mechanic, I love watching old-school transmission guys tear these things down like nothing, throw the parts in a big pile, and then build them back up knowing exactly where everything goes. Stellar work as always.

@reaperasylum2163 4 года назад

I'm a mechanic as well but I steer away from a trans rebuild lol.

@young11984 4 года назад

James Keller agreed, I build my own but they are laid out the way it comes apart except my C4s I can build them in my sleep lol

@gdcskates 4 года назад

absolutely

@goinhot9133 4 года назад

It blows my mind how quick he just tears thru it haha

@gruetter7890 4 года назад

@@young11984 because its a ford pos!! Lol jk

@google_was_my_idea_first 4 года назад

"All this stuff I'm telling you is real simple mistakes that you can make if you're doing this at home" lol. Yeah, no f'ing way am I doing this at home.

@stevie-ray2020 4 года назад

First mistake would be even thinking about attempting to do this at home!

@michaelszczys8316 4 года назад

They didn’t have him, but now we do so if you’re going to work on your own watch this guy and learn all the ‘ right ‘ tricks.

@howardcon5126 4 года назад

The worst part is having to replace you living room carpet....again.

@Mikej1592 4 года назад

@@howardcon5126 all I did once was rebuild a pump assembly for a th400r4 and nearly had to replace the carpet in my apartment, found a really good cleaner that got out the fluid I spilt. I bought a couple containers more of it just in case they stopped making it.

@alanblyde8502 4 года назад

Jon Storch very wise man👍🇦🇺

@jz9189 4 года назад

I opened a bottle of Dextron V and poured it on my hands to get a real feel for the video🤣

@Thundarr995 3 года назад

👍😆

@1911junkie 3 года назад

Usually gm uses dx 6 brotha 👌

@jz9189 3 года назад

@@1911junkie You say tomatoes; I say potatoes 🙃🙃🙃🙃🙃🙃

@tomadkins2866 3 года назад

If you work on greasy, nasty stuff, that high detergent Dexron (no T) will clean the crap out of your hands and make them soft. It's hard to get the smell off, though. LOL

@thomasmleahy6218 3 года назад

That fluid looked like a chocolate shake.

@cwclifford 4 года назад

Trans engineering makes the internal combustion engine look like child's play!

@DT-vl8xm 4 года назад

Sure put a helluva lot of thought into solving the "inconvenience" of manual shifting.. Torque converters are insanely clever as well. Sometimes I wonder if some of these ideas came from space. I'da told the guy to stuff it if they asked me to make a car shift itself. I'da called him a lazy bastard too... N here we are lol

@matteightytwo 3 года назад

Trans engineering looks like intergalactic travel compared to internal combustion engines 😳

@JF32304 3 года назад

Yep

@Spudderr 3 года назад

The older ones aren’t terrible. Just get a good book and a bunch of sandwich bags for parts and a rebuild is doable for anyone that has mechanical aptitude. That being said when you get up to the 4+ speeds things get more complex in a hurry and this guy is very good at what he does.

@AffordBindEquipment 3 года назад

I was thinking the same thing.

@salvtec 4 года назад

You can see just how good this guy is, he could probably build this blindfolded... impressive skills... 👍

@christianmccollum1028 4 года назад

This guy IS the real deal. Wish all transmission guys were this knowledgeable.

@theroyalcrownedtiger2946 4 года назад

I would like to learn 1 on 1, how to rebuild transmissions from him.

@spambeanie2 4 года назад

I can do that with a turbo 350 I've done so many of them in the race car

@cobrasvt347 4 года назад

When you been doing it as long as we have it wouldn’t be too hard to pull off. May make a good RU-vid video. I might keep that in mind. Thanks.

@Lpedraja2002 4 года назад

I was gonna comment on the same thing! This guy does everything so smoothly that you feel confident about his skills.

@796andy2 4 года назад

Guys forgotten more than most will ever know , respect

@bigjay6743 4 года назад

I like to think of myself as a pretty mechanical guy but these automatic transmissions got so much going on. It would take many many years to be on this guy's level.

@loganpe427 4 года назад

@@bigjay6743 Naw, if this was your daily job you'd pick it up pretty fast. It's the diagnostic skill that's the real art, that part takes time but with a guy this good teaching you you'd be a pro in no time, right? Right!

@michaelszczys8316 4 года назад

When I was young I used to play with old Chevy Powerglide transmissions and got to know all the parts pretty good but this transmission is 20 times more complicated. I used to be space ship mechanic because I actually understood and was daring enough to attempt working on an automatic transmission while most people would just cross their eyes and make gurgling noises at the idea. This guy is true ‘ space ship mechanic ‘

@jimquisenberry1225 4 года назад

Jason Mercer o

@paulcooper2897 3 года назад

I get what you're saying .. but I'm not sure guys like this actually forget anything!

@carlwitt3934 4 года назад

This good ol boy knows what he's doing. Every turn,flip and spin is done with purpose and max efficiency. It's like watching a master butcher cutting up an entire cow.

@MIckveli2 4 года назад

lol ya got that right !

@lancelotkillz 4 года назад

Smooth

@coffeemaddan 3 года назад

Watching the gear oil pour out, I had the same image. Astonishing to watch the efficiency/economy of movement. Exactly like a master butcher with some freshly honed knives. I'll fix almost anything, but that transmission isn't something I'd want to play with. Excellent video

@nicholasrhodes4550 4 года назад

The way he knows the little ins and outs of that transmission as though he designed the damn thing...he probably knows things like that about ALL of them... I bow in humility.

@crackerjack4833 4 года назад

I do too... but with every near master comes a con .... he probably doesn't know squat about cooking or computers .... or arts & crafts..... be careful who you bow in humility to ..... you may have (know) something another does not. In which case, BOTH should bow in humility to each other ... rather just a one sided "I bow to your greatness on transmissions!!!!" H'e a nerd, like me. I can do things he can't do. He can do things I can't do. There's that equilibrium everyone keeps screaming about ... you know, the circle of life..... the trait that makes what we have a marketable item .... for sale....... for currency............ Finally? He'd wipe my ass clean out of this solar system when it comes to Transmissions.

@timesthree5757 3 года назад

No shit this man can truly call himself a master.

@rosscollins2910 3 года назад

Bet he knows things about this unit that the team of engineers who designed it don’t know

@RobertMChambers 2 года назад

If designed them they'd be bulletproof. He knows by now just about every way one of those units fails and could tell the designers a thing or two about making them better for sure.

@TheBeingReal 4 года назад

Adding nitrous keeps a lot of people employed. lol

@loganpe427 4 года назад

Capitalism! Ya can't beat it!

@creightonleerose582 4 года назад

I prefer it in my lungs if @ all possible. Why waste N2O in an infernal combustion engine?! Love me some dentists!...Mmmmm! Mmmmm! Mmmmm!...;) This guy is a flat ProWizardScientist of deconstruction/construction/metallurgy! VERY cool to see! Thanks Mechaniacs! Im mechanically inclined -BUT- much like a postal parcel getting from one end of the 'Erf to another, its a flat WONDER that all these interconnected pieces of steel do a choreographed dance that results in converting rotational energy to forward/reverse motion... Love it when people build performance engines then seem to forget about all the things on down the line to the rear tires?

@michaelszczys8316 4 года назад

One of my favorite ‘ nitrous ‘ incidents was a tv show where these guys had to buy old used car and make it go 140mph and one guy put nitrous injection in his car and when he was going as fast as it would go ( about only 100 ) he hit the nitrous switch and it ......did nothing.

@Watcher3223 3 года назад

It's good for mechanics ... and dentists.

@shiroyasha4995 3 года назад

@@creightonleerose582 i think what you meant is internal combustion engine

@seanoleary1979 4 года назад

I've been working on cars for 42 years and can say unequivocally that this is one of those guys that truly amazes me! He wreaks of experience, knowledge, and truth. Sadly, there's only a handful of them on this planet. Thank you awesome gentleman from Precision Transmission!!!

@mrt7814 4 года назад

Our kids just arnt learning like this anymore.

@Z-Bart 4 года назад

@@mrt7814 His son Trent is learning a TON. 👍

@blue_wolf5171 4 года назад

@@mrt7814 It's not about not wanting to learn, it's about the school that doesn't learn a single thing. I have learned 4 years in technical school to recieve a paper that I am a car mechanic. Last year I went to college, this year I quit, because rather than learning shit to get paper, I started doing real things. And in last few weeks I have learned more, than I had in 4 and a half years in school. It doesn't matter how long you have been ''learning'' in school, since only thing what matters is how much experience you have in real world.

@Captain-Awesome 4 года назад

Now I understand why people say that Transmissions are voodoo wizardry.... Crazy Complicated!!

@bobswaggert7285 4 года назад

Listening to someone who truly is at the top of his trade is amazing. If he were a doctor, Covid 19 would be a thing of the past.

@ashleyhansen3326 4 года назад

Yeah he would stop the transmission

@BlackNightJack 3 года назад

@@ashleyhansen3326 COVID be gone!

@colemanadamson5943 3 года назад

You mean the fake virus?

@RealRocdad 3 года назад

I love his autopsy table!

@RealRocdad 3 года назад

If you need a whole new case isn't it easier just to buy a crate transmission? Anyhow great video

@curtisbeers9383 4 года назад

I can smell the burnt transmission fluid just watching this.

@soyounoat 4 года назад

The knowledge displayed by this man is overwhelming. Every part of that transmission, every measurement, tolerance, range of modification and the resulting performance, all clearly explained. A+++++

@AffordBindEquipment 3 года назад

and from memory. No manuals, not look it up on youtube to see how it's done...

@langer24106 3 года назад

What took this guy 30 minutes would take me 10 years. Respect.

@AWoulds 3 года назад

Its crazy how relaxed he is, just throwing parts and pieces aside to continue digging deeper. I cant imagine how anybody could put something like this back together without forgetting anything.

@__WJK__ 3 года назад

Agree! Like kindergarten level "paint-by-number" I'd need kindergarten level "build-by-number" instructions just to avoid perpetual sleepless nights thinking I missed one tiny curcial step, part, update or special "trick" that would come back to haunt me ... to the tune of $1000s of dollars and the nightmare propsect of having to repeat the entire process over again.

@jamesbaskins6351 2 года назад

After 2 aday its not that hard.

@erose1544 4 года назад

Me: “Have you ever taken apart a transmission before?” This guy: “Watch this and try and keep up.”

@uploadJ 4 года назад

Yeah, I had to watch REAL close, that man knows his transmissions.

@Stratos1988 4 года назад

Have You got manual for this thing ? and he be like " I AM the manual"

@johnlacambra6004 4 года назад

more like... Me: Do you know how to This guy:(DrrDrrrDrrroooOo!) Ayne that's how you gettir done!

@bcad4066 4 года назад

I could take a transmission apart that fast, but it wouldn't go back together.

@HappilyHomicidalHooligan 4 года назад

Me: “Have you ever taken apart a transmission before?” This guy: "Which Model...never mind - Yes!"

@drcovell 4 года назад

Amen. The concept “Blind Watchmaker” comes to mind. AT LEAST as many parts as a Rolex. I think the reason Aliens appear to people down South is that they’ve had a breakdown a zillion miles from home and know that a Southern mechanic can fix anything!

@veretos7 3 года назад

The Aliens took me up.... And asked if I could fix their warp drive. Had to stop by home depot for supplies, but we got er done

@ni4nijustice855 3 года назад

I hope this gentleman makes MILLIONS every year

@omegagavin 4 года назад

This guy knows more about transmissions than I do about any topic.

@superduty4556 4 года назад

Keep chugging along and these videos will absolutely pay for themselves, fellas.

@IrishEddie317 4 года назад

This guy is an artist! What a pleasure to watch him working. Love the way he just tosses everything aside, knowing full well he is on top of the rebuild.

@maxwedge5683 4 года назад

Him: "But honey, why does everything you cook tastes like transmission fluid?"

@ohp1571 3 года назад

Me: “Have you ever taken apart a transmission before?” This guy: “Watch this and try and keep up.”

@spencercopan2940 3 года назад

This man was an automatic transmission in a past life.

@richardparker3924 4 года назад

Man this guy knows his stuff! I'm impressed!

@heavyduty6697 4 года назад

That second phone call could not have been timed more perfectly 😂 Eerie music just as you peak over to see the absolute train wreck in that case. Love yalls videos!

@leebarnes655 4 года назад

I thought it was edited in, crying in my beer old timey ragtime - it was perfect.

@JosephHelmstetterinFlowerMound 4 года назад

Yep, no need to say sorry. It was perfect timing.

@ichoozjc 4 года назад

Exactly what I thought lol

@anunentitledmotivatedmille7731 4 года назад

The music did not play just has he peeks over the case too see the absolute trainwreck. Lier.

@shannonburns6724 4 года назад

A master at his trade. I have torn down Mack, Fullers, and Spicer manuals. But gentleman knows his teade. My hat is off to you. We are losing this type of persons everyday, never to be replaced. Take a bow. God bless.

@michaelsalt5464 3 года назад

This is a classic case of " you're paying for the years, not the hours". Such a phenomenal knowledge of transmission.

@louislarsen2256 4 года назад

The engineers that designed this were incredibly smart! You techs that work on them are equally impressive.

@joemagnets9940 4 года назад

FINALLY, a mechanic that knows what the HELL HE"S DOING. It would be interesting to know his 'background' and how long he's been wrenching, and WHERE.

@michaelszczys8316 4 года назад

There are some of us that are pretty sure what we’re doing, the problem is most of us don’t do it professionally, we do something else for a living and only work on a few here and there.

@davidtaylor4053 3 года назад

It's a family business and he been at it more than 40 years.

@thomasphilyaw8593 3 года назад

You remind me of my late uncle. He always threw everything into a pile and knew what every bolt went to when he put it back together. Accent included too.

@WICKEDGIXXERL 4 года назад

I don't give a shift about transmissions. But there's something about watching you work on them . that's satisfying...

@derekmcfadyen127 4 года назад

This is how you do a gearbox teardown on youtube !.....fully explained ... knowledge shared .... perfect 😁😁

@MrWolfTickets 4 года назад

4:38 You only want metal flake on the OUTSIDE of your car, in the paint. Don't let anyone sell you on this 'sparkle dex' fluid!! :-) thanks for another great video.

@davidtoth8975 4 года назад

No, see, the thing is that the metal powder sits into the grooves and renews the bearing surfaces. The gas station guy himself told me.

@tomasnokechtesledger1786 4 года назад

Cherrish Brown metal color. I wanna car that color.

@steveorshon 4 года назад

Richard is a transmission guru. If you are anywhere near his shop, HE is the man to see to build you something bullet-proof.

@jamesholliday5222 3 года назад

I salute you!!! this man has obviously invested his life into his work and is willing to try and pass on his knoledge...... RESPECT........

@manfredseidler1531 4 года назад

Watched the whole thing and saw no manual "Transmissions for Dummies" anywhere. I know nothing about transmissions but found this mechanic extremely entertaining and educational. Hope he passes even just a part of what he knows on to the next generation.

@cdjhyoung 4 года назад

Very, very impressive. My dad was a truck mechanic that spent the end of his career rebuilding Allison truck automatic transmissions. His work station included a labeled board to set every piece he took out of the trans. Whoa be it to anyone that dared to pick up a piece off that board. Seeing this trans tear down gives me new respect for what my dad did on a daily basis.

@ellenorbjornsdottir1166 4 года назад

Woe be it*?

@tomadkins2866 3 года назад

Your Dad deserves many props for his experience. I've rebuilt a handful of Allison transmissions, mostly old AT-540s. They're not simple by any means, but very much less complicated than the newer ones. I always used a version of his labelled board. Without it they would have quickly been just a pile of parts.

@oby-1607 4 года назад

Watching you explain and demonstrate what is working in these transmissions is very therapeutic for me at the end of my day. I don;t do transmissions, but I do repair a lot equipment that has been worked on before by self proclaimed experts..

@deebo-nt2jz 3 года назад

Master Mechanic with "everyone must get stoned" as his ring tone... Lol.... Loved the video.... We are not worthy Sir!! You are an artist.

@liamjerkins7259 3 года назад

Truly, time is money for this man...

@bijeshbalakrishnan9118 4 года назад

This is the best skilled mechanic i have ever seen. I am sitting here wondering how this guy know so much about this mountain of metals.

@loganpe427 4 года назад

I've built and rebuilt everything else on hundreds of cars & trucks including manual transmission but watching guys that know automatics tear one apart like this is still impressive! I've just never done it, I could of course but this is experience I've never been in the position to gain, I'm lost after 2 minutes 😂😂😂👍 Beautiful!

@jototro 2 года назад

Don't apologize for nothing, especially your phone ringing. You sir, seem like the nicest, humblest man, which is refreshing to hear nowadays. God Bless.

@frankbiro8107 4 года назад

Love this guy he’ knows he’s stuff and hes a very humble man thanks for the vids

@fabricancustoms 4 года назад

That was some real carnage! Thanks for this one.

@alfredocarpaneto5976 3 года назад

I hope this guy makes more money on his YT videos than his transmission business. He has given the world his knowledge. Priceless information.

@tomadkins2866 3 года назад

I was a Ford Master Tech in a former career and fellows like this still blow me away. I can muddle my way through "restuffing" a C4 or C6 (or THM350/400) if pressed, but doing a proper rebuild/update on a modern automatic trans is a huge skill set all its own. This fellow shows exactly why a transmission rebuild is $3000+ today.

@Guzzi_Pete 4 года назад

It's a pleasure to watch someone who's clearly a master of their subject. Much respect.

@Strato13 4 года назад

The phone is charming, don’t be sorry! I can tell by your ring tone, you’re an old school kinda guy, humble, friendly, and helpful to those who need help in anything. Carry on!

@franksmythe6969 3 года назад

Why is it so relaxing to watch somebody tear down transmissions?

@kevinbeesley2489 4 года назад

My vacuum cleaner broke down so I decided to fix it. They are simple, right. It ended up in a skip. This guy is yet another unknown genius, respect.

@lynskyrd 4 года назад

something tells me this isn't this guy's first time taking apart a transmission... i dunno- just a hunch.

@jasonmulliken5620 4 года назад

When the phone started ringing the 2nd time I 100% thought it was and edit for a death of that case 😂

@davidwhitacre534 4 года назад

The guy is an artist.......with red oil on his hands. I have a great deal of respect for transmission mechanics as they have to be very knowledgeable to get these things apart and back together.

@cam.evo8661 2 года назад

i love that this guy knows his craft so well he just tosses parts off to the side and knows exactly what it is. thats the trans dude you want working on your stuff

@MyCatInABox 4 года назад

No joke- I've watched EVERY video you guy's have uploaded in the past month...and I'm still looking foward to more. (I'm embarrassed to say that, for some reason of another, I wasn't subscribed...so, I fixed that!)

@peterbustin2683 4 года назад

This is like watching someone process a murder scene !

@baddriversoflittlerock8359 4 года назад

The red fluid didnt help, lol

@mountainman5025 4 года назад

Who killed the transmission? Film at eleven

@gorillaau 2 года назад

It's an autopsy. What killed the transmission?

@peterbustin2683 2 года назад

@@gorillaau I think it was the spanner in the drawing room.

@harmstrongg 3 года назад

I don't know what's happening, but I know why I can't stop watching. Seeing a master at his craft.

@NIGHTOWL-jf9zt 3 года назад

This guy is slinging parts aside without regards like he's done this before. I was lost at bolt #1. It's a real treat to see this man work like this. Speed transmission re building should be a sport!

@Xeeke 4 года назад

A clean up video for this transmission would be awesome!

@Twan5.7 4 года назад

They won't show that

@oteimoto85 4 года назад

I swear this guy could be a combat medic. The no nonsense way he gets to the issue without any fuss or lack of confidence is pretty epic. 👍

@docsavage5063 4 года назад

As a combat medic myself, I absolutely agree.

@MrThewillows 2 года назад

this chap is a national treasure. I'm pleased to see that someone is clever enough to record this mans experience as it is a rare thing. thank you so much for sharing. hats off

@ronjones-6977 4 года назад

Just subscribed. Not because I'm gonna learn much that will help me, but because I love watching a pro work. You remind me of the mechanics I used to know and respect when I was a kid. I'd lump most of the new ones in with politicians.

@jack902902 3 года назад

I need to go back to school, found a new passion.

@e34boat88 4 года назад

my brains feels like scrambled eggs soaked with atf. that thing has way too many parts

@retro440 4 года назад

You noticed that, too???

@ichoozjc 4 года назад

Haha right?! I thought they just had a couple gears in them 🤣

@surfside75 4 года назад

I'm going to be nicer to my automatic transmission from now on✔️😂

@pickelsvx 4 года назад

@@ichoozjc Manual transmissions are much simpler.

@cr500mike 2 года назад

I can understand everything on a vehicle except the inner workings of an automatic transmission. Dude knows his stuff.

@xutfw 3 года назад

My favorite part of this channel is how well balanced the audio is on some of these videos. That's a small detail I think ppl over look.

@Eddiecurrent2000 4 года назад

I love the bluesy ring tone as the destroyed case is exposed, couldn't have timed it better...

@MrNotorius5500 4 года назад

You caught that too. Nice.

@RustyDodd 4 года назад

tools on the right, parts on the left...i'm learning things

@GeorgeTsiros 4 года назад

and disaster in the middle

@surfside75 4 года назад

😂😂😂

@glennbrymer4065 3 года назад

I have been watching him for a few days now. I am beyond amazed at how he has Everything down pat. He knows every little thing to look for. His explanations are very detailed and he has a ton of practical build experience. But, all those parts give me nightmares. You have to really know what you are doing. Love watching and listening to him. A real wrench master there!

@mbpm6135 3 года назад

It might just be me being an autist, but I have a real deep appreciation of watching hands at work. This guy Richard is so skilled and accurate it just displays a level of expertise that only a handful of people on the planet can match, and it takes decades to train. I want to be like that too - doesn't matter what your profession is.

@kukelhupf 4 года назад

As a fairly young mechanic I'm extremely jealous of your experience.

@lancelotkillz 4 года назад

You're surge from soda AZ

@bkembley 4 года назад

Do you ever work dual shaft transmissions for front wheel drive transverse engines? I would love to see some tear downs/builds of that type!!

@jeremiahjorenby2275 4 года назад

same, would definitely like to see a 4T65E teardown

@gregpayne3770 4 года назад

HAH i was thinking the same trans. Put a 4t65 in a van this week and have blown a couple in the past in my own cars.

@Dandle01 4 года назад

It's a pleasure to watch you work. Thanks for the videos.

@NGC-gu6dz 4 года назад

I don't drive a car, but if I did, and I needed transmission work, and I lived in Somewhere America, I'd find this guy.

@BsUJeTs 4 года назад

Adding nitrous, turbos, or superchargers to stock engines and transmissions can get expensive really fast.

@michaelszczys8316 4 года назад

I really hate when every B.S. session about cars always ends up in nitrous oxide injection ( cheating ) I always tell them they need to do it the old fashion way. I love it though when I hear of someone talking about putting nitrous injection in their car and by the time they ran out their first bottle they managed to melt all their pistons.

@brandoncherry1651 4 года назад

This guy could build a transmission in his sleep 😂😂😂😂😁😁....prolly has..

@NewEraFitted89 3 года назад

He has probably woken up one time or another and found a fully built trans in his room and went "wtf again..i gotta stop sleep building these damn things"

@Sixguns1 3 года назад

Just wanted to pop in and say thank you so much for making these videos. Your knowledge from decades of practical experience is so valuable and we're lucky that you're sharing it with us.

@stevenevans5459 3 года назад

I come across your videos a few days ago and I've watched at least 25 of them now very interesting I really enjoy how you go in detail when taking them apart thank you for the great videos and keep up the great work

@kennethmilus1533 4 года назад

You sure go threw those like you invented it!!!

@walterwhite2270 3 года назад

I too love watching him tear into transmissions...make it look as easy as taking a puzzle apart and putting it back together. He has a lot of knowledge and experience that goes unmatched by many...Thanks for sharing your info and thx for the fun videos.

@mikinozz 4 года назад

R-E-S-P-E-C-T Thank you for posting this video. It's amazing to watch a master craftsman at work.

@threadtapwhisperer5136 3 года назад

I love that we can look over the shoulders of masters in their craft, deep in their element, experience and knowledge undeniably on display. Additionally Richard isn't talking shit about the shops that jack up the work. Hes concentrating on showing exactly why and how shit went wrong and what the result will be plus the upgrades. What the other shop needs to be doing is secretly using these teardown videos as training material or grouds for termination of employment, depending on severity of work half assed. Thanks for making these videos. There is nothing better than a experienced and seasoned professional passionate about informing the customer base while still showing off the fruits of decades of difficult work. Hats off to you guys, absolutely just found these videos yesterday and been binge watching since. I have a vested interest, as I am planning a rebuild in my garage for a 4L60E 4wd for a 1998 K1500 Z71. Thanks for providing parts links as well. Truly doing a service to leave a lasting record of your lifes work. Awesome stuff.

@lesserlogic9977 4 года назад

It's nice to watch a video and not feel dumber afterwards. I appreciate the detail!

@bobw222 4 года назад

It's great watching someone tear one of these down so fast, especially when they can describe what everything does in the process.

@Strengthandconditioning60 2 года назад

That's it. I'm going out right now and yanking my perfectly fine transmission out of my car and completely disassembling it to make sure everything was done right and then putting back together in an hour like he does. I feel confident.

@brandysigmon9066 4 года назад

This guy knows his stuff, the folks that engineered /design transmissions are amazing as well

@joeclarke9782 4 года назад

Very much appreciated. The stainless work surface perfectly designed to get the job done. Well thought out like everything else in these videos.

@jools1666 4 года назад

I love watching a really talented mechanic work, you make it look so easy!

@swagger7 4 года назад

That is the most practiced precision I've ever seen on a transmission. Just wow. Well done.

@petergarofolo9385 3 года назад

Love watching these videos. You are the Bob Ross of transmission repair.

@digdug5945 4 года назад

I have to tell you that you are a master if there ever was one. I have been a mechanic for 45 years, but you are way ahead of me. You must have started mechanics the moment you were born. When I'm working on cars now I have to take precautions and wear gloves because in the last few years the chemicals finally caught up with me. Now I have to keep the oil and fluid off my hands because I get dizzy and start shaking a lot if I get those chemicals on my hands. I can't even smell brake cleaner anymore without having a reaction. This is really annoying because it's hard to avoid that. If I ever need my trans rebuilt I know who to come to. Keep up the good work. You are awesome.

@johnelliott5472 4 года назад

Congratulations. Your detailed explainations are worthy of Merit. I did not appreciate the complexities of an auto transmission untiI watched you pull this beast apart. Thank you for being so knowledgable and sharing.

@aftbit 4 года назад

I understood about half of the words in this video. Hydraulics are absolutely mind-blowing to me. It's always a pleasure to watch a master at work. Years of lessons learned (presumably some the hard way) shared in 30 minutes.

@pburet 3 года назад

impressive - a lifetime of knowledge summarized in 30 minutes. I really enjoy your videos.

@cottonroberts179 3 года назад

Everytime he pulled a piece out of that case I thought about how lost I was and THEN he would take that piece into 5 other pieces.I have a deep respect for a good transmission man.