Noob's Guide to Modding Headers!

Подписаться 742 тыс.

Просмотров 208 тыс.

50% 1

I went to change the Endcards and Ad Placement. The Video got stuck in the infinite processing glitch in RU-vid's garbage editor studio. Hence I had to reupload it. Long Tube vs. Short Tube. Equal vs. Unequal. 180 Degree vs. 90 Degree. Welcome to a basic guide to help you decide what kind of headers to run your car. Unless you have a Rotary. In which case, enjoy the two tubes that pretend to be headers and kind of sorta meet a mid-pipe. Fun days. Anyways, I shortly will be getting nice set of headers put on my beautiful Leone, and I hope to unveil it in the coming weeks. Most Corvette owners like to go as deep as possible and rumble the Earth, but I preferred to do something a little different. I decided on a high pitched scream, one that'll that'll piece the heavens!
HOW I MAKE MY VIDEOS!
VIDEO EDITING SOFTWARE: www.amazon.com...
MY MICROPHONE: www.amazon.com...
MY CAMERA: www.amazon.com...
MY GOPRO: www.amazon.com...
MY PHONE: www.amazon.com...
MY TWITTER! / bladed__angel
MY INSTAGRAM! / bladed_angel
Music Credit: LAKEY INSPIRED
Track Name: Chill Day
• LAKEY INSPIRED - Chill...
Music by Joakim Karud / joakimkarud
Lowrider: • Lowrider by Joakim Kar...
Song: foxela & HAEMOND - Kawaii
Link: / northcloudscol. .
Released by North Clouds Collective!
DISCLAIMER:
Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing."
The materials are used for illustrative and exemplification reasons, also quoting in order to recombine elements to make a new work.

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 451

@TeamNuclear2011 5 лет назад

Stupid question, would it be advisable to get a ECU tune if I were to get short tube headers installed?

@stillnottellingyoumyname8193 5 лет назад

I'm honestly wondering this too Edit: nevermind

@BladedAngel 5 лет назад

Easy answer. Always. For shorties, an email tune would work fine. Anything longer, I recommend Dyno tuning.

@mateuszzimon8216 5 лет назад

@@BladedAngel Tune was recomended even for stock headers

@TeamNuclear2011 5 лет назад

@@BladedAngel thanks for the info, much love

@Agent.K. 5 лет назад

Joe Mama Ofc

@phoenixeragon6404 5 лет назад

"get a tune to take advantage of the headers" *Laughs in carbureted

@traceanthony3588 5 лет назад

*stumbles a bit then takes off*

@TransGirlGaming 5 лет назад

Yeah

@bryanmartinez6600 5 лет назад

I envy you. Eh I'll just hack job my O2 sensor and hope it won't throw a code but either way SEND IT!!!

@390nm 5 лет назад

Carbs are trash

@phoenixeragon6404 5 лет назад

@@390nm they can be tuned in really well, but it all depends on the person tuning it. Doesn't take care of itself like an efi system

@I_Am_Lt_Surge 5 лет назад

“Cast Arn” carful blade, your Georgia is showing.

@DeiHarper9361 5 лет назад

Lol

@davedavis775 5 лет назад

It's been many years since any Mustang , Camaro, Firebird, Corvette or even a Mopar had cast iron exhaust manifolds.

@BladedAngel 4 года назад

LOL. Even to this day I can't truly 100% hide my country accent. Two times it shows through are if I'm tripping on words, or if i get really riled up, I'll give up on attempting to gentrify my speech and just let it all come out.

@joshuabenitez3260 5 лет назад

That was a really nice flower. Made that whole chart come together 😀

@crashwebb4715 4 года назад

So I've been watching car videos all day now and I just wanna take a moment to appreciate how awesome cars and their surrounding community is

@vintagestealth8802 5 лет назад

“Thanos would like these.” I’m sold on mid-lengths for my 4.3 S10

@freefreefromdisease 5 лет назад

Is there a header to make my car sound like Bruh Sound Effect #2?

@kal9908 5 лет назад

I really believe this comment is under rated

@averagenoobie9985 4 года назад

I would make my header scream like karen asking for the manager

@ibrokemyownheart4953 4 года назад

“Bruuuuuuh, bruuuuuuuuuh, bruuuuuuuuuuuuuuuuuuuuh, bruuuuuuuuuuuh, BRUUHHHHHHHHHHH!”

@crashwebb4715 4 года назад

Prolly if you just kept the stock ones since that's seen as a bruh moment in the car community

@freddycavalli3097 4 года назад

Frick

@liangliangxu7061 5 лет назад

Who's here after seeing how his Corvette sounds?

@jakevincent3365 5 лет назад

Everybody

@bagamsnsnsnsns2062 5 лет назад

RogueBullet pretty much

@nedinnis6752 5 лет назад

Same

@dctmatt 5 лет назад

me and my dad were litterally about to buy new headers for our new rx8, and this guide is perfect because we were stuck

@joshcc4681 5 лет назад

But bladed Where's The MIATA???!!!!

@mr.kangaroo3472 5 лет назад

Lol

@Oat_meal_YT 5 лет назад

Lmao

@Daviavo 5 лет назад

Josh Cc lol

@guardrailhitter 4 года назад

How's the miata

@davidroman4107 5 лет назад

so ur telling me i can make me mustang gt sound like a ferrari huh.Time to buy some headers

@BladedAngel 5 лет назад

A Shelby GT350 with equal length headers will do the trick. It basically already is a Ferrari engine anyway. Without the deliberate exhaust scavenging jamming, the car will scavenge evenly and scream like a mofo. Especially with it's high RPM. There's some videos of it with equal headers. Unforgettable sound.

@Liggliluff 5 лет назад

I would like to see a Bladed Angel guide to car laws. You do mention that some stuff are illegal, and legal in different regions. It would be nice to know more about these laws more specifically, and where those applies. You can also go through misconceptions and less known laws that are good to know. Informative, and interesting. - But it would also be great if you could cover more regions than just USA, for your international audience.

@MrAndrius12 5 лет назад

Honestly kind of interesting to hear what a diesel engine would sound like with each of these set ups :D

@noobplayer_23 2 года назад

unless it's N/A it'll never ever gonna happen

@Deoxide 5 лет назад

This video is actually disguised as "Bladed'sd Vette is finally sounding like a real ferrari"

@bocahdongo7769 5 лет назад

If he put 180 Header obviously

@mickaelblake7088 5 лет назад

@Deoxide I see you are a Man of culture as well Damn, the automotive scene on RU-vid is pretty small

@BladedAngel 4 года назад

LMAO, you predicted it.

@Robo-xk4jm 3 года назад

funny seeing you here

@counterfeit7333 3 года назад

I love how he put a Subaru when talking about reliability and detonation.

@germangutierrez6041 5 лет назад

I just found your channel and I don’t know much about cars but man your channel is Amazing I’ve learned a good bit from the couple of videos I’ve watched!

@jrcautomotive4319 5 лет назад

Oh RIP I got a heart from Bladed on the original.

@BladedAngel 5 лет назад

Here's one again.

@jrcautomotive4319 5 лет назад

Bladed Angel Oh my god you are senpai

@basithph8958 5 лет назад

I need headers so that my 6-banger sounds like a V8

@bagamsnsnsnsns2062 5 лет назад

Jack Russelle V8< getting the V8 and still adding headers

@matthijsverweij3894 5 лет назад

What will you see while racing a r35? Oo\______/oO

@ahrred3127 5 лет назад

What About R34? Oo I_____I oO

@KiiroiKodomo 5 лет назад

What about a Corvette C6 ●●\___/●●

@sebastiangeorger5791 5 лет назад

What about a Lamborghini Murcielago

@KiiroiKodomo 5 лет назад

@@sebastiangeorger5791 what about a Buagtti Chiron _________________

@matthijsverweij3894 5 лет назад

@@KiiroiKodomo what about a Supra (OOOO) (OOOO)

@Unfall_XO 5 лет назад

I saw this yesterday why did it get taken down Edit never mind

@stellacd 5 лет назад

Me too

@tancow 5 лет назад

read the description

@BladedAngel 5 лет назад

RU-vids garbage ass processing is why. I just went to change endcards and whelp. Got stuck with the infinite processing glitch. Beats me how they still haven't fixed that.

@fpaltenhoff86 5 лет назад

Texas speed!!!! Probably gonna go with them when I get some headers for my Gto

@kristoffersparegodt420 5 лет назад

What year is the car

@fpaltenhoff86 5 лет назад

It’s a 2005

@TotoGeenen 5 лет назад

Finally I can make my automatic v6 Mustang sound like a v8

@jakene1956 5 лет назад

Don't know why this video has low views, it's one of your most informative videos !

@rndargis0 5 лет назад

Thinks bladed , now I have the goal to buy a c8 and make it sound like a Ferrari

@hunteraltman4762 5 лет назад

You could do an 8 to 1 header. Look up the v8 swapped vw passat

@tony_5156 4 года назад

No need since they’re making a FLATCRANK version with a high revving tone

@rndargis0 4 года назад

@@tony_5156 From what I know , the ZR1 isn't out yet. Also , if I have the money to buy a ZR1 , I would insted invest that money, because right now the economy is crap but it will go back up eventualy.

@oxidizedolive 3 года назад

About a year ago, I had short tubes installed on my 03 Dakota 3.9L. Between that, the cat, magaflow rumbler, and turn-down at the bed, it sounds nasty, but tame at idle and low rpm cruising. Due to the fact that the engine only revs to around 5k, I don't get quite the drop off that some cars get, and it still sounds good if I'm pushing redline. Only complaint is the drone that comes with have an exit underneath the vehicle. I've had a number of people ask me if it was the 5.2L since having it installed, so I guess I can be considered a ricer now... 😅

@cleverpython1546 5 лет назад

I want a header to make my 350z sound like a Ferrari just to flex on all the non-car people

@cribiokordova6145 4 года назад

8:02 Fun fact: "quasi" in italian means almost

@nicomaster2942 5 лет назад

Ever get the feeling of deja vu?

@agezzz2854 5 лет назад

NicoMaster29 is that from stronghold 2?

@nicolapalmieri7344 5 лет назад

Overwatch

@nicomaster2942 5 лет назад

vaxinity desu nah bladed uploaded this video twice, was confused tf happened

@nicolapalmieri7344 5 лет назад

@@nicomaster2942 yup

@mistersmith3067 4 года назад

We’re in the Matrix

@hoopatroopa4878 5 лет назад

alright, totally gettin true long tubes for my 95 chevy 5.7. i’m playin

@DeadRatStew 4 года назад

Long tube: *exist* Thanos: perfectly balanced, as all things should be

@majorleaguefoodgaming 5 лет назад

Why didn’t you talk about stainless vs ceramic coated vs titanium?

@nickbarnes2564 3 месяца назад

Another advantage to headers is that most stock engines now have aluminum heads which is a GOOD thing. The bad thing manufacturers dropped the ball on is bolting a cast iron exhaust manifold to the Aluminum heads. Aluminum cools alot faster than the cast iron does. Cast Iron retains heat for a long time. With heat, comes expansion & the different rates at which the two different metals cool is huge, enough that the studs will end up snapping or the bolts can strip right out. Headers even though made of Steel, it is thin and cools alot faster than the cast so the expansion and retraction of the head & headers is as close to equal as you can get and solve that issue.

@osamakhalid1810 5 лет назад

Very informative, loved ur content thanks alot man, it's great to hear someone who understands and knows what's best for a vette rather than adding tunning many stuff that do none but damage the ride I'm not technical person so want to ask u what would u best advice if I want to change the sound of my c6 GS 2010 to best ? Mine is pure stock Basically I'm just looking for plug n play, no mods no tunning

@leonardr6704 5 лет назад

2:52 did you just put a Mazda rx8 gauge in a video about long tube headers?

@poldpoldecki7171 3 года назад

Samurai champloo music at the very beginning. I don't thing anyone finds that interesting, but I like that soundtrack.

@johnwatkins3883 4 года назад

I think ima go with equal length shorties on my 2003 Chevy Tahoe v8. I’m all about prolonging the life of my engine! And shorties seem the best for that with little no no issue of installing! Hell yeah!

@nickamarit 3 года назад

Hey Bladed Angel, I was wondering, would it be possible to tune the sound of a piston engine through the use of extremely clever header design to make it sound like a Wankel/rotary? Of course, the more amount of cylinders a car has, then it would sound more "even", which might help make it more possible, but not everyone can afford to drive a V12. What about a clever header design that can make an inline-6 sound like a Wankel/rotary? So I'm thinking that the primaries have to be equal-length and also bequite small and short, so the speed of the gas is moved evenly and very quickly to join with each other. I'm also thinking that it must be a 6-1 instead of 6-3-1 as most inline 6's use. I'm thinking that the system might also use a high-pass-filter resonator, to only allow high pitched sound to come through, which makes it sound even more like a Wankel/rotary.

@bryanmartinez6600 5 лет назад

I just got some headers from AFE for my Titan and a cat back exhaust as well.

@reedgates4436 5 лет назад

That subtle stance boy diss

@jonathanellison9193 5 лет назад

What about 8 into 1 headers? Don't forget the little known holy grail

@mouaxiong8618 5 лет назад

Nah screw headers just go no exhaust and your motor will breathe freely

@onyxfox.09 5 лет назад

good, I just checked if Utah had any Laws against Loud exhaust (We don't have one)

@Carboyhshdj 5 лет назад

Me puts real longtub on 1996 bronco like "ya it's a track car" also got them for free from uncle made in 1962 costom made

@frontwheeldrip4253 5 лет назад

I’m surprised you didn’t mention how exhaust pulses are affected with different header setups. Subaru guys especially will tell you that it’s a world of difference between EL and UEL headers.

@Plate_Productions 5 лет назад

You know your a powaaaaahhhh boi when you have true long unequal headers in your car

@jesserutt7413 5 лет назад

Was the, “theres a header for that” a play on oversimplified’s “theres a tax for that”? Cause it instantly reminded me of it

@themadkraken1912 4 года назад

What all could I get rid of in an engine bay to fit mid- tubes? It's so crowded and I'm wondering how much of it is necessary when I see hot rods that are just the engine, tubes, massive carburetor scoop and some turbos.

@SpecialEDy Год назад

You have it backwards. Short headers are tuned for high RPM, long tubes are tuned for torque at low RPM. Same as an intake. The pipe length is tuned like a musical instrument, a longer pipe reverberates at a lower frequency.

@TheseBygones 5 лет назад

I can make my 86 camaro sound like a ferrari?! Count me in...😂

@tcb_666 5 лет назад

Honest question: I want to own and modify a 1986 Chevy K10. What would be the best header for the vehicle? I am thinking 180° Equal Mid Lengths (for performance. If I was modifying for sound, I'd do 90° unequal True Longs). Thoughts? Ideas?

@BladedAngel 5 лет назад

180s are very expensive. I probably should've mentioned that in the video. They have very few practical applications. Like Corvettes and Ford GT's. They're mostly sound. 90 degree is always better for cheap performance.

@danielandlukeplaygames8329 4 года назад

cool background music

@jeremyswalley8625 2 года назад

Some of these looked like balloon animals!!

@ramongonzales9312 2 года назад

*long headers hang low* Me with my Bronco: "I DON'T HAVE SUCH WEEKNESES"

@marcopina5848 5 лет назад

I got 97 s10 2.2 stock atm what headers you recomend and great job with the videos

@prime6091 5 лет назад

I know this is completely different, but what is your thoughts on the Hennessey Exorcist. "The Exorcist" is the fastest muscle car there is making almost 1000 bhp and goes a max of 217 mph 4-5 mph faster than the new Corvette ZR1

@claudiobizama5603 5 лет назад

Not a production car

@prime6091 5 лет назад

@@claudiobizama5603 yes, I know, I just got obsessed with it for some reason, but I never stated it was a production car

@joshy4235 5 лет назад

You can’t really call something the fastest of it’s class if it isn’t a production car

@AsapRockyOG 5 лет назад

Sowse Bowse it’s not the fastest muscle car there is lol

@salvatorehayes2753 3 года назад

Long Tube Headers... 05-2011 Grand Cherokee SRT8. Who Else Went Through Hell And Back Installing Them And Lived To Tell LMAO. 11 Hour Install Time On My 06 Jeep Commander With A 5.7 Hemi. And I'm A Chrysler Tech With 5 Years Experience. Omg I Was Gonna Do A Cam Later But The Thought Of Taking The Headers Back Out Gives Me The Chills hahahahaha

@MrNobody989 3 года назад

So what is the typical price range for long tube headers I’m making my 2005 doge truck a racing truck and have about $800 dollars to spend on headers. Is that enough or do I need more

@DinosaurJuiceCars 5 лет назад

My westfield has a side exhaust so i dont have to worry about hitting the exhaust on the ground but the oil sump is very low.

@brendanposey5479 2 года назад

An option for some mid 90s early 2000s cars is a chip I have the jett stage 2 on my 4cy 5speed s10 with a header and cold air and it went from painfully slow to slightly less slow (14 sec to 12sec 0-60) ecus are expensive and getting a actual performance gain from a stock ecu with a header for like 200 buck is totally worth if u plan on daily driving just do your research

@conork1603 3 года назад

Wouldn’t stock headers have a better sound because the noise will go out quicker?

@abdullahhassan2127 5 лет назад

Man so many good info! Keep going bro 👍🔥

@frankrizzo2724 5 лет назад

The most important thing to get right is primary tube diameter... In a n/a 90degree V8 primary length is is far more important than than being equal and shorties are a waste of money, even more if equal length.

@MawoDuffer 4 года назад

Nascar is like: the rest of the exhaust? We only have tubes for every cylinder

@farmerboy9029 5 лет назад

He said to keep your Catalytic Converter but he never said you couldn't hollow it out

@tatsu-kun1252 5 лет назад

Can't believe that i subscribed here when this channel is still have 400 subs

@nigeleliashenry9927 5 лет назад

I'm mad you uploaded when I was sleeping :(

@kennethstegall1075 5 лет назад

I can honestly say this is the very first time I have ever heard these 2 things being the first that it will magically make your car like something else when that is what the muffler is for yes headers will change the sound but make it sound more "tin like" and now the 2nd thing what is true long tube headers are you trying to say full length headers cause thats what they are classified as so you can turn out the collector out the side of the car and long tune headers or as you say mid length are for you to continue to run the exhaust all the way out the back

@misc3741 Год назад

"Just like everything in life, size matters too."

@xInferRedx 5 лет назад

Guys the reason it was re uploaded is in the description.

@jacobsweat1520 5 лет назад

i have true long tubes running straight from my 400sbc right out the back of my 48 diamond t 201. 76 lifte k2500 with a rat-rod truck body means no fitment issues at all

@sandkingsofficial3884 5 лет назад

My 04 Monte Carlo SS 3.8L (not Supercharged) has a med/low rumble sound at idle. And sounds like a V6 muscle car at 4000rpm.

@chimera1767 4 года назад

I can't wait to leave cali

@theredwedge9446 4 месяца назад

I would love 180 degree headers

@moparmanicgarage 5 лет назад

I have Hooker true long tubes on my '67 charger 383ci

@Shrapnel-qy4xi 5 лет назад

Thanoscopter has mid-length headers.

@bassglaze3275 4 года назад

What brand of headers should I get for a c5 Base/Z06? I want it to sound very very smooth like your C7, any links? And is their some that dont dip down as much?

@ZayBeastPlayz 4 месяца назад

So the quasi equal length short headers is better performance, better sound, better mpg, and better reliability than stock? (I have a 2013 ford taurus)

@NepNep2B 5 лет назад

What are your thougths on the new c8 corvette?

@ls2443 5 лет назад

I’m dropping my current favorite car (Alfa Giulia) for it. Well, good chance. I need to see it in person first. Someone I know works at the Chevy dealer near me, so I will soon

@colinf5304 5 лет назад

The back is ugly and it doesn’t look like a traditional corvette but I like the car from a performance standpoint

@idotdotdot 4 года назад

Wow you sold me on getting a C7 are you active on forums? Who did your headers and are they selling them still?

@ballsacksniffer420 4 года назад

Oooohhhhhh so now i know why the exaust pipes of top fule dragsters are so twisty, they're just longtube headers and no other pipes! Thanks bladed!

@RobertVivian 5 лет назад

Yes, Thanos would like long headers.

@andymartin9919 3 месяца назад

Does the diameter of the header affect the sound of the car? Example: will 2 inch header sound the same as a 3 inch?

@StangLovers 2 года назад

I have shorties now but I’m going long tube soon

@swaiin. 5 лет назад

never forget that scene in transformers when megan fox says “woah you got nice headers” and shia lebouf is just drooling at her 😂😂😂

@razzaus1570 5 лет назад

Im here after hearing your vette

@louisharleyaguilar4003 5 лет назад

Hey when is the new stingray vid coming out???? Will you be upgrading your vette for it?

@BladedAngel 5 лет назад

No.

@louisharleyaguilar4003 5 лет назад

@@BladedAngel ahh cool cool

@NezukoChan-mm5nm 3 года назад

"And before you feel bad about running shorties , remember that how you use them also matters " I can relate but it's not related to cars

@lsswappedcessna 4 года назад

my car has an exhaust leak, probably gonna do equal length (so I can still run on 87 octane) shorties when I replace the original manifolds because most of the 54 year old 330 ci V8 is torque anyways.

@x2dab184 5 лет назад

73 barracuda. Is it advisable to get headers on a classic. 383 v8 4 speed. Getting new exhaust next month for weight reduction and better sound, should I get headers too?

@ForestxWalker06 5 лет назад

Hey bladed, why not do a video on suspension next ?

@potatoavacadonion1025 5 лет назад

Is the mid long tube headers perfectly balanced like all things should be *Thanos heard car start up with mid long headers* Thanos: perfectly balanced, like all things should be, Mid long headers: Thanos approved👍👌

@SciSenkra 2 года назад

The gt350 sounds different because it's not a normal floatplane, it's up down up down and not down up up down

@wessmith736 5 месяцев назад

Equal vs. Unequal 7:00 Equal: Smooth sound and power. Unequal: Adds rumble

@79c10man 5 лет назад

Okay so what I gather from this is to run true long tubes with no mufflers on the street for daily driving for max power to get to work and back.

@esthetics4512 Год назад

Love your thinking 😭💯💯

@Meeper2 5 лет назад

In the state and county I live in the only emission testing is lift the car check to see if theirs a catalytic converter and it passes

@lil.mountenlighting7682 5 лет назад

Headers use one combustion of a cylinder to suck the exhaust out of the next the the same way a carburetor works that's why you get more performance not just because they flow better, that doesn't do a whole lot

@deandrej674 5 лет назад

I think my 2001 Tundra with the 4.7 V8 would sound nice with mid lengths

@MarineRacingTeam 5 лет назад

I put in shorties on my 2003 tundra

@MarineRacingTeam 5 лет назад

Sounds slightly different

@tfoxfamtfoxrules4875 5 лет назад

Your right about youll get used to shifting at your cars loudest point, when i play forza horizon i shift with the sound not spedo

@shanchauhan8281 5 лет назад

So what would be the best header choice for a classic car? like I want the choppiness/ rumble

@HensonRKaye 5 лет назад

I have one question, it’s not related to the video but I was wondering if you could answer it. One of my favorite super cars is the first Gen Acura NSX but some people make fun of me for liking a “mom car brand” or “not even a super car” What is the best way I can politely, and honorably, share my opinion on why I like it so much?

@gorankorica8808 5 лет назад

Say to them: first gen nsx is better looking (at least to me) and its not half electric 👌and its not dhat slower from the 2 gen even in the hp/engine difference... overall they are both great cars