"Not Running" Omega Constellation Vintage Watch Restoration

Подписаться 831 тыс.

Просмотров 1,1 млн

50% 1

Marshall picks up a used, non-working but beautiful Omega Constellation from eBay for about $700.00 and sets his mind to restoring it! It ends up being a bit of a bumpy ride with parts flying around the room and a lot of backtracking, but the end result is worth it!
Support Wristwatch Revival via Patreon: / wristwatchrevival
Visit Sutcliffe Hansen for toolkits, revived watches, straps and more: sutcliffehansen.com/
Follow on Instagram for Project Updates in between video releases: @wristwatch_revival
------------------------------------
These are Amazon affiliate links to some of the equipment used for these videos and purchasing anything through them helps support the channel.
WATCHMAKING TOOLS AVAILABLE ON AMAZON:
Bergeon Screwdriver Set: amzn.to/34URcok
Dumont Tweezer #3: amzn.to/2YX4Hjl
Bergeon Springbar Tool: amzn.to/3jF8pX1
Bergeon Case Opening Ball: amzn.to/34VLbYg
Bergeon Presto Hand Removal Tool: amzn.to/3bfHtdo
Bergeon Movement Holder: amzn.to/3hQsY29
Horotec Hand Setting Tools: amzn.to/2Gdye1K
Rodico: amzn.to/32K0PDG
Bergeon Blower: amzn.to/34RgVxX
Bergeon Case Opening Knife: amzn.to/34VHr9e
Bergeon Quick Service Kit: amzn.to/2QHnScC
Ultrasonic Cleaning Machine: amzn.to/3i6BBER
Amscope Microscope: amzn.to/2EuReZ4
Multifunction Timegrapher: amzn.to/344jw5I
CAMERAS AND AUDIO:
Main Camera, Sony A7III: amzn.to/2Dk3Q4K
Secondary Camera, Sony RX100: amzn.to/2Dlrwpx
Tertiary Camera, Sony A6400: amzn.to/3jVaYqh
Main Macro Lens, Sigma 70mm f/2.8: amzn.to/3lD4Wdb
Secondary Macro, Laowa 100mm f/2.8 amzn.to/2ZGmFKo
Camlink 4k Video Converter: amzn.to/3hTiiQf
Rode USB Microphone: amzn.to/2EQphLb
Audio Recorder, ZOOM H6: amzn.to/31R11BQ
Small Sirui Tripod: amzn.to/2YVgeQl
Sirui Tripod Head for Overhad Camera: amzn.to/2QNoNZ8
COMPUTER STUFF:
Apple Macbook Pro: amzn.to/2EFPKvr
Synology NAS: amzn.to/3bpVTaY
Seagate HDDs for NAS: amzn.to/3hQ5hqt
Samsung Portable Drive: amzn.to/34UdhTT

Хобби

Опубликовано:

26 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2 тыс.

@FaintSignals 2 года назад

I love watching these, this guy is the Bob Ross of watch repair. I'll never paint a picture or rebuild a watch but i find listening and watching to these videos relaxing.

@FaintSignals 2 года назад

That bridge flying off wasn't very relaxing, please post a warning next time! Had to make myself a cup of chamomile tea just to get back into the mellow.

@Breca 2 года назад

@@FaintSignals : )

@brucedeleon9505 2 года назад

Marshall is incredible and you nailed it! He is a Bob Ross of watch restorations. 👍

@teedoubleu2580 2 года назад

dito :-)

@michaelmyers4176 2 года назад

Totally agree. But holy cow did that spring have some power behind it. I saw that coming cause Marshal forgot he had just had it on the Timegrapher and I guess didn’t realize it still had a shit ton of power to it. Lol love these videos he’s sort of like a gambler/watch repair guy with these insane eBay finds

@hoangxnguyen Год назад

My father gave me the exact same watch before he passed. Thank you Dad.

@BlueXonar Год назад

Hi Marshall, I was wondering if you would consider showing us your personal watch collection and projects? I am always interested to know what is on your wrist when you record these videos. I know it would sway from your usual content, but I think most of your viewers would get a lot of enjoyment out of something like that!

@fjklfdasdf Год назад

agree!

@TheHelado36 5 месяцев назад

Agree

@ysz7423 2 года назад

I don’t really understand how you can make a fifty plus minutes video so educational and, most importantly, entertaining. Bravo! Thank you for those video.

@smt1199 2 года назад

This episode was awesome. Explosions, surprises, mistakes made, mistakes fixed. 10/10

@WristwatchRevival 2 года назад

Appreciate it. Hoping the next one is down a few explosions :)

@chrisdavidson9431 10 месяцев назад

Wow, I’ve just rewatched this episode. It means a lot to me, my Father had an identical Constellation. He wore it everyday from buying it until he lost it sometime in the 90’s. My brothers car had broken down and he went out to help fix it, took off his watch at the side of the road, fixed the car and ….. Sad end to his Omega 😢

@arkbg22 6 месяцев назад

CLOCK DRAMA!!!

@mvaght87 Год назад

Marshall is the Chef John of watch repairs.

@chrisbtoo Год назад

Spending half an hour removing a single link from my new Orient Kamasu gave me a whole new appreciation for both your skill and your eyesight. Loved this restoration!

@davidcrandall4958 Год назад

christboo At my Age I can empathize with You,and I am an ex watch repair person (deteriorating eyesight and carpal tunnel syndrome have a lot to do with that!)I agree these presentations are amazing!

@Thrillrider10 2 года назад

I love the fact that Marshall keeps all of his mistakes and mishaps in the videos. Really good demonstration that these things happen. Even the best watchmakers out there, from the pros all the way down to everyday hobbyists, will make mistakes from time to time, and it's really important to keep that in mind.

@sargentcolon2323 2 года назад

I was sat there watching and saying to myself “let the power out first”, I only know this is a thing from you Marshall. Makes me think I want to try this hobby out. I’m learning so much.

@elfinfluff 2 года назад

I was just thinking, "you know, I bet the reason he couldn't turn the crown to wind it is because the spring had been fully wound and stuck." right before The Incident.

@robcarnaroli269 2 года назад

Yup, that part saved me on my first teardown. Fresh in my mind :-)

@johnwayne2103 2 года назад

Just like a firearm, you always assume it's loaded.

@sinjon 2 года назад

This has to be one of, if not the best watch restoration channels on RU-vid. Perfect angles, perfect pace and explanations. This is just so relaxing

@respectanimals2 2 года назад

I agree completely, faultless , so very well produced ,impressive in every respect

@stuartcole4845 2 года назад

My favourite would be the Nekkid Watchmaker. He has a very similar, calm demeanour, is funny, and has 25 years of profession experience. Being a pro he also tackles much more complicated movements and does AMAZING complete restorations. He is extremely talented with his craft and has done things like custom made out-of-production crystals in odd shapes like rounded rectangles, does lots of re-plating etc. A really good example would be this restoration of a 40s JLC: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5-beGnHzQDM.html

@vinnykitty1983 2 года назад

U forgot to mention his calm voice, he talks like a tutor who teaches for fun and not for money with the intention of wanting you to become actually good

@sinjon 2 года назад

@@vinnykitty1983 well said. It’s true

@fogbow 2 года назад

Check out Nekkid Watchmaker as well, super skillful and entertaining as well. Love this channel too, more is better as far as I'm concerned

@redletterl78 2 месяца назад

Much better looking than modern Constellation watches!

@lionofjudea4146 2 года назад

Marshall, This is the PERFECT type of show to sell to PBS. Your voice is perfect... I highly recommend you ask PBS to look at your excellent work..... Best of Luck, David.

@seanquinn3316 2 года назад

I have to thank you. I've had a large collection of watchmaking tools for a couple years and had fallen out of love with it due to lack of direction. Your videos inspired me to dig out the 3-jar cleaner and have at it again. I bought a handful of 1880's pocket watches and I'm going to restore them. Thank you so much!

@1tonyboat 2 года назад

good luck on your quest... and enjoy..

@rozabanach2717 2 года назад

@@1tonyboat - jak nie naprawiałeś nigdy zegarka to go popsujesz. Jak myślisz, po ilu latach ten zegarmistrz tak zręcznie naprawia zegarki ?

@Fixin-To 2 года назад

@@rozabanach2717 2 years

@ryeshyes2552 2 года назад

thats cool! Pls make vids!

@user-svqmbiv Год назад

@@rozabanach2717 even the great masters were once bad at what they did.

@sky173 2 года назад

My grand father received one of these with his name engraved in the back of it for 40 years of service at his place of employment. My dad gave it to me 20 years ago. It's one of my favorite watches.

@Mooster199 2 года назад

Marshall, you have inspired me..... now I have a bunch of broken watches to fix! Its very therapeutic

@randallsmith7885 9 месяцев назад

This is the first video I watched on this channel. Love every minute. I own a pie pan Constellation with arrowhead applied markers. It is beautiful. Believe from the 1950's Fortunately, it still runs. I don't wear it often but happy to have it.

@pabl048 2 года назад

Man, as I'm going through this I just got to where the spring loaded goodness just lashed out at you. I can't thank you enough for showing not just all the cool and awesome parts of servicing and restoring a watch, but all of the not so fun times as well. That's just hugely beneficial for everyone looking to get into the hobby like myself. You're a great host, Marshall. Thank you for making these videos! :) Edit: One day if Marshall moves he's going to find small parts in places they should never have landed and be like "ah yeah, this was from that omega constellation incident. Good times" lol

@aaronshapiro2542 2 года назад

The way that thing jumped, the missing part is probably stuck in the ceiling.

@yaimamartinez9576 2 года назад

@@aaronshapiro2542 I think he should be grateful it didn't ended up in his eye. 😲

@wf_hill1763 2 года назад

I thought I heard an alley cat screech and glass bottles break outside his window.

@Supreme-King 2 года назад

Watching you and Baumgartner Restoration are the best way to relax. Hopefully your channer gets more recognition. I'm tired of getting recommended "restoration" videos of people who artificially age stuff in mud, coffee or salt water and then "restore" it by using some WD-40, dish soap and water and then act like they just did God's work.

@WristwatchRevival 2 года назад

That bothers me too. People even do it for watch restorations on here! They have some watch with literal caked on mud on it... like anyone is handing over a watch for restoration with MUD on it, it's ridiculous.

@randycrager4074 Год назад

That is a fine looking watch, thanks for the videos. The first time I observed a jeweler was in, well I think 73 or 74, I had a fine watch that I was pretty proud of but the back popped off and I tried like heck to get it to reseat and my Dad said, "Son, you need to take that to a Jeweler to have it pressed on." I asked Dad what a Jeweler was, lol and he told me so I got invited up to the second floor at a Posh Jewelry store and I was freaking amazed at all the small tools and his work table with his lights and magnifying stands. It only took him seconds to press it on and he didn't charge me anything and I was so Impressed with him and what he did. I was used to having a big framing hammer and a prybar in my hand but I'll never forget how impressed I was and how many times while watching your videos (quite a few) I think of that day almost 50 years ago, just graduated from high school!

@robertgoidel Год назад

Who would thnk this was the remedy for getting this OMEGA Constellation to run again. Good Job!

@thepacketnarc7634 2 года назад

I finally found a RU-vid home ! :) I have 2 dozen watches from cheap Quartz beaters, to complicated Swiss autos, and I’ve always been fascinated by mechanical things. I’m an engineer by trade and you’ve got me down the rabbit hole on tools and “projects”. My wife hates you, but I love it ! Keep doing what you’re doing.

@bluebox303 2 года назад

The hairspring stud for this movement actually can be moved to adjust beat error (one of the first movements to do so). It isn't necessary to adjust using the hairspring collet.

@watchmakerspecial516 2 года назад

Incorrect, This Omega calibre does not have beat error arm regulator, It's a fixed arm.

@bluebox303 2 года назад

Sorry, but Omega part 550-1363 is called the stud holder for a reason. Perhaps you're thinking of the 500 series, which were the antecedents of the 55X/56X series.

@watchmakerspecial516 2 года назад

@@bluebox303 Actually you are right, I didn't realise until check that this is 551 calibre movement. I worked on too many Omega movement, I get abit brain fog lol Cheers though,

@bruceblackerby3742 Год назад

I purchased a non-working 561 Constellation last year for next to nothing. Sent it to Omega for repair. Just got it back after 8 months. Looks brand new. Enjoyed your video, seeing what all is done to repair such a watch. Omega replaced a bunch of parts, which is fine with me. Figure it'll be good for the rest of my life at this point.

@CornusXelor Год назад

I have now watched I think 8 videos so far and this one was my favorite, the 2nd being the restoration of the vintage rolex that was super rusted!!!!!!!!!!!! While I couldn't get my girlfriend to listen to LR she does also enjoy watching these!!!!

@JohnCline 2 года назад

I knew very little about watches before I've viewed every video on your channel over the last month or so, just before the barrel bridge flew across the room, I was thinking, "Isn't he going to take the power out of the mainspring?" So, apparently, I HAVE learned more than I thought from your channel, thanks! I have a really nice, VERY old pocket watch which isn't running, I'm thinking about tackling it soon.

@ohger1 2 года назад

LOL. I was at my friend's jewelry store buying a gift for my wife and I spotted an old pocket watch movement on his counter (salvaged for the gold case). I picked it up and judging from the way the balance wheel was flopping around immediately knew the balance wheel pivot was broken..

@stingersteelers1 2 года назад

My thoughts exactly about the power no sooner I thought about that then parts whent everywhere ever out his window wow

@colinmetzler 2 года назад

what's the status of the pocket watch?

@Maximum_Twang 2 года назад

I’ve watched so many video on this channel and others, and strangely enough, this watch has caught my eye more than any other. I am absolutely in love with this piece, and now I have to go find myself a vintage omega watch with an observatory back and 3D dial. Let the journey begin!

@fjklfdasdf Год назад

i fell in love with this watch also, but strictly this version. Sadly, it's just too expensive :(

@mikedellinger872 2 года назад

Kudos for keeping the mistakes in. Anyone trying at home needs to see those.

@anthonyvidmar3916 2 года назад

Finally, I am so happy to see you restoring a Connie Pie Pan of which I have two. I like the tan strap you chose. Thanks

@dougdax 2 года назад

That Omega model is my all-time favourite Omega. Glad to see it will continue to tick for many years.

@volvo09 2 года назад

Looks beautiful

@lordknightalex 2 года назад

that dial is stunning, i love the 3D look of it. and it's so lucky that the whole thing's working so easily! the automatic winding works on this one is a bit confusing to understand for me as someone who only just barely knows how watches work, but still it's such a pretty movement in more personal news, my grandfather let me take his watch with me to take a look at, now i just need to get myself some tools to get it open and find out whats wrong with it, really looking forward to that

@drewlaw9117 Год назад

hey Thank You so much for posting this - I have a lovely 1960s Constellation that I wear every day and I love it to bits. Nice to be able to see all this without risking taking the back off myself. Thank you sir.

@MrKevin486 2 месяца назад

Some of these old Omega dials are just awesome looking. I particularly love this dial.

@elund408 2 года назад

I love this era of watches, simple details, little flash.

@mr_mr 2 года назад

13:19 "looks like the spring is okay".. ahh yeah Marshall, that spring could launch a rocket into space lol! You need a barrier around you to catch things. A batter's cage for watchmakers. I really love that you went with it and explained what you may have done differently. Thank you!

@BlindTom61 6 месяцев назад

"And now we can take off the barrel 'BOING!'" I love your videos. My favorites, hands down. But that boing was priceless. You are one cool customer!

@mrz80 2 месяца назад

I always wondered what'd happen if you tried to disassemble a movement without letting down the mainspring. That was... um... attention-getting, to be sure.

@TexanUSMC8089 5 месяцев назад

This watch came out beautiful. I have an early 60's Omega that needs a crystal, Flitz, and total service inside. I plan on wearing this old-school timepiece.

@INSIDEHARDWARE 2 года назад

Letting you know I have binge watched number of these. I have been sick. I love how you sorta start from scratch each video with tool names and part names. It’s like a perfect class room lesson. I am diy repair man in many fields. Have done many iPad iPhone repairs. Seeing some of these tools has definitely inspired me to buy some.

@72mardy 2 года назад

Hi Marshall. Firstly, I love the videos. I had one pop up in my recommendations about a month ago due to watching tool restoration videos. Well...I was fascinated. I've watched most of your videos now and always look forward to the new ones. I've had the same watch, an Adina Oceaneer, for almost 20 years. It's a great watch.... titanium case and bracelet, sapphire crystal. It was was a birthday present from my dad, purchased from a local jeweller/watchmaker who happens to be a friend of mine due to our kids going to the same school. Anyway....this newfound interest in watches did two things. Firstly, it made me appreciate what my friend does for a living as beforehand I'd never really understood the intricacies of the craft. Secondly, it jogged my memory about another watch that my dad gave me 40 odd years previously. I wore it here and there for a while until it got forgotten about and then spent almost the next 4 decades in a drawer.....until 3 weeks ago. The watch is a 1973 Citizen automatic 6501 TV dial. Not rare or expensive by any means, but still a nice old watch. So, with said watch in hand and my newfound interest and knowledge I popped down to see my friend at the jewellery store. I asked him could he take a look at it and see if it was worth servicing. He said no problems so I left it with him while I went away over Christmas/new years. I returned to a polished, working, beautiful watch that I happily wear now every other day. I have since purchased a couple more plus other parts, bracelets etc from ebay to build two more matching watches....one for my son and one for my dad. Because of you and what you do I have a new interest and will soon have something special to give my dad and my son. Thanks Marshall.

@joeschlitz5333 2 года назад

Awesome comment, such a good gift

@ericbeaulieu976 Месяц назад

Thank you Marshal, for keeping that explosion in there. Everyone makes mistakes and it's the learning from them that helps us grow. I've been watching you for a bit and I always wondered why you needed to control the barrel as you let the tension out. Now I know. Keep up the great work.

@StevieRico 3 месяца назад

It’s a terrifying feeling of it’s a gear or just a spring bar when you hear the TICK, and your heart stops for a second and you hear something hit the ground across the room, and you realize, I have to look for that. I went into a quartz pocket watch and needless to say, I no longer have a quartz pocket watch. Learned my lesson and have cried inside every day since. Friggin awesome content. He has an amazing podcast voice. Keep up the good work!!!

@benbacon7519 2 года назад

I have poor eyesight at this point in my life, so I couldn’t do this. All the same, I’m vicariously enjoying your hobby! You’re very good at explaining what you’re doing, and you have a good sense of humor about it.

@WristwatchRevival 2 года назад

Thanks for coming along for the ride :)

@Saucyakld 2 года назад

Love that word, vicariously!

@rangerstl07 Год назад

Not only are you entertaining to watch and soothing to listen to, you are an exceptional photographer as well.

@Eric1SanDiego1 Год назад

I've watched six or seven videos of his so far, and I've learned new vocabulary words like "pallet fork", "balance", "escape wheel", and the like. Now, finally, he's showing me what the numbers on his Timegrapher mean! Not gonna lie, I had no idea I'd be fascinated by this stuff, but I am.

@benburra6655 4 месяца назад

Marshal…found you about 3-months ago…I literally watch you 3-4 X a week! I am fascinated! I am somewhat of a collector but do not do my own maintenance or repairs. Far too much invested to “hand me a beer and get out of my way”! 😂 However…the “EXPLOSION”…unless you have edited EVERYTHING out…I am impressed! I would have lost my U-Tube channel. My bride just came into my workshop and thought I had hurt myself with the language I was spewing for you! Absolutely GREAT content! THANK YOU! 👍

@judasslip 2 года назад

I picked up the hobby from watching your videos. I've serviced several vintage pocket watches since then, and this videos brings back memories of my first try when I made the same mistake of removing the barrel bridge before releasing the spring tension.

@ericmarquis319 2 года назад

I've watched a few of your videos now and there's something so relaxing about them. Perfect listening during a long night shift

@Maxikxng 2 года назад

I feel like your comment has been copied by someone

@ocozinheiro 2 года назад

When I grow up I want to be just like you, I'm 37 years old and who someday. Congratulations and thank you so much for sharing.

@west_nebraska_dude4527 Год назад

Watching you never gets old.

@palachapelle2178 2 года назад

I've love watching you working on these Omega Constelation. I have the joy to wear a 1963 Omega Seamaster. For me watch making is the perfect union of the art and technique.

@shawnhulke7385 Год назад

Can’t afford one but love the beauty of these. Nice work and I’m glad you don’t edit out your mistakes cuz it’s nice to see your human too. And have things go wrong.

@Poorlybobsdad 6 месяцев назад

My Grandfather (who I never met) had the exact same watch. It was in a drawer not working. I had it sent to Omega for repair and now it’s part of my modest watch collection. I like to wear it as a dress watch. It’s fascinating to see what goes on to get one running. Thanks for the video. 👍🏻

@beardwithab6994 Год назад

Just got an 18k version with brown leather strap for my wedding day - it’s arriving today - can’t wait! Been looking for the right one for months. Such a beautiful dial and caseback

@peterpatch1998 2 года назад

A lovely restoration. Your acceptance of your mistakes and ability to rectify them is excellent. That’s a beautiful watch. I wish it was mine. 😎

@WristwatchRevival 2 года назад

I really try to learn from the mistakes but being human is really annoying sometimes :)

@CESnarr 2 года назад

This watch is beautiful. It is probably one of my favorites you've done.

@giustinianorusso8155 Год назад

Voglio vedere gli orologi omga

@giustinianorusso8155 Год назад

0mega

@morphshag 10 месяцев назад

Finished product actually looks amazing.

@richardrappleyea7307 2 года назад

Man I know next to nothing about watches but I love these videos because they help me go to sleep

@rossfinnigan4909 2 года назад

Excellent job. Great editing, narration, content, perfect attention to the details, I appreciate that we see the mistakes. 9.5/10 because I want to know where the gear went.

@codypappa1667 2 года назад

I love just how real your videos always feel. You show every single step, and thats something that really sets your channel apart for me. Other channels with skips steps in the process, and just from having watched YOUR videos (Ive never taking apart a watch) I can notice which steps they skipped. This one especially with the obvious mistake, but you kept it in. Keep it up please

@thecuteness9534 11 месяцев назад

I have been watching too many of these videos (some multiple times). At (25:40), I noted Marshell was putting the yoke in upside down, not only because of the orientation but also the wear mark where it meets up with the sliding clutch. I am glad you did not edit out your "oops"! You have been a great educator, Marshall; thanks. I am starting to think I could enjoy this hobby for myself.

@stevehogan8829 2 года назад

Thanks for doing that with the collar mount on the balance wheel. Think I've watched this twice now. Nice job.

@12345....... 2 года назад

Who would of thought you need a high speed camera for a watch repair video 🙃

@swede178 2 года назад

New subscriber here. I watched some of your videos and was inspired so I took one of my mechanical watches and opened up the backside. Had a look and went "Nope, I wont do that" But Im glad that you do!

@walter.bellini Год назад

Really enjoyed this video; it showcased your talents in figuring out why a few things weren't working correctly. If I may suggest a simple plexiglass enclosure with a top to create a way for things that jump out to be easily found as they will be stopped by the plexiglass wall around your working area, saving you time, money, and unneeded stress. Thank you

@budcarr8673 2 месяца назад

The balance is the heartbeat of the movement. Cool when it jumps alive. That really came out beautiful..

@cyrillemiller8798 2 года назад

@tdcattech 2 года назад

These videos are extremely relaxing and informative. Your camera work and shot selection are superb. It's a privilege for us to have such a clear insight into this miniature world.

@davidinghram2494 11 месяцев назад

If I ever get another vintage Omega, it`s going to be one of these. A beautiful thing.

@Drew-ni2ze 2 года назад

Can't believe I stumbled onto this video. Marshalls commentary is just as great here as it was for pro mtg casting! Love seeing this guy doing well.

@mortal1997 2 года назад

I first touched the Omega vintage with 552 Caliber. Highly impressed by the movement, since it still can run smoothly after all these years. All it needs is proper cleaning and oiling.

@uqox 2 года назад

I learned so much watching this. That's an impressive sequence of events on this repair. These examples of how you have to be resilient to repair a watch, adjust for setbacks, and identify solutions for malfunctions is very inspiring to watch. I appreciate your videos!

@tamasmihaly1 Год назад

Your temperament is enviable. I love this channel. Maybe I can vicariously acquire some of your calm if I watch long enough.

@leftysheppey Год назад

Oh man, that strap is PERFECT. I love it!

@ramblerandy2397 2 года назад

I view all these very informative and actually quite calming videos, and each time an Omega pops up I get excited. I love them, and I know why. It's totally sentimental and nostalgic. It's because the first Olympic Games that I properly saw (Mexico 1968) had Omega timing. I was 9 years old. I also have a soft spot for Seiko Model 5 Automatics because Seiko was the official timer for Tokyo 64. Silly, I know, but emotional attachments are often like that. Lovely video - including those happy little misadventures. 👍

@stanspch1 2 года назад

Tbh I stumbled across this channel a couple of days ago & I’m hooked!. I never new I would be so mesmerised by the actual precise build of the movements, never mind the voice!, it’s so calming , & factual. I’ve binged watched as much as I can , in the time I have. Love it.

@harrisonmccullough1183 7 месяцев назад

I was waiting for you to unwind when it flew.

@stevenkuhr7463 2 года назад

Constructive criticism: Hey Marshall. I know nothing about watches (except I enjoy them). Your videos are quite interesting and relaxing! Great explanations of what’s what, how parts work and etc. I’m not sure how to dm on yt so I figured the comment section would work. I find your clip transitions to be quite choppy. 3-4 angles to remove one or two items from the watch. I find it breaking the zen like concentration your narration and craft provide. One, maybe two angles would more than suffice. If you disagree and like the many frame angles, I suggest you crop the center/focus point clip to clip. Just my thoughts. If you don’t change anything, no big deal. I’ll still be watching. Hell, you might not even see this comment. Thanks!

@medicolt2535 2 года назад

I'm so glad you posted when you did. I love watching your videos when I need to relax and need good vibes. Love your work brother keep it up!

@johnfinn1570 2 года назад

Ditto

@pauldogon2578 Год назад

Your level of calmness blows my mind, If that had happened to me I would have probably had a major meltdown.

@terryloh8583 2 года назад

Wonderful! Another beautiful vintage watch restored and saved for future generations to appreciate. I just love how things were created to last and were both beautiful and functional.

@dominikpfleghaar5091 2 года назад

I really appreciate all the time, work and effort you put into these videos and also the calm and eloquent narration. One can tell that you truly enjoy what you're doing. Watching them is very entertaining, educative, and relaxing. Please do keep up the great work. Also, as a side note, being a resident of Switzerland of course I appreciate the mechanical marvel that are these little Swiss time pieces ;-)

@WristwatchRevival 2 года назад

Thank you :) I appreciate it!

@cahizy4498 2 года назад

Recently found your videos on my recommendations never thought I would love learning about watches keep up the good work very informative and entertaining

@BMfixit Год назад

Absolutely my teacher. I'm actually going to get in the business because you have inspired me. That's a big thanks Marshall

@KelvinsurajRepairs Год назад

Same here!

@davidcrandall4958 Год назад

This takes Knowledge and practice! Don't rush in too fast! It's an expensive Hobby,not easy to turn into a business!

@palanides5081 Год назад

it is sooooo soothing just watching clock repairs, it heals my mind more than zen and tea. Great video as always

@josiahsmusicaccount 2 года назад

Love that watch it's gorgeous! One small quibble: that dial had some surface grime, especially on the indices, that could have been removed safely with some rodico, without risking damage. Keep up the good work!

@victorbecker4802 Год назад

good point! i wonder if it the glue holding in the indices seemed brittle to him. typically he’ll wipe down the watch if possible unless he likes the look of the patina. it’s also possible its not even visible to the naked eye off the microscope so why bother lol

@SolitaireNZ 2 года назад

Yeah, I'm going to have to stretch my budget and get into this. Super interesting hobby, great work again!

@travr6 2 года назад

This is one of those hobbies where you can make money easily. Buy old not working watches on ebay, flea markets, goodwill, etc... Fix the ones you can and sell them as restored.

@Alex-px2mb Год назад

Beautiful job and kudos to you for showing you mistakes. Nobody learns if they don't see them.

@glennpettersson9002 2 года назад

The great thing about watch making is it's nothing like working on an unexploded bomb. Well mostly 😂 I find your videos very calming so that spring scared the heck out of me😂😂😂

@Kombivar 2 года назад

It's always great fun and relax to watch your videos, more than that I feel really tempted to ask some local watch maker/service for holiday time assistant work - nothing major, just see what I can do as I can't do more than service my Suunto Vector once every 14months which requires just battery and strap. Awesome stuff, as always - Thank you!!!

@bradyyyyyyy11 Год назад

Completely gorgeous watch and stunning restoration! Thanks for another great video. This quickly became my favorite channel!!

@tarog6 Год назад

My father had this watch when he was in the coastguard. He had the date number. One of my first memories was looking at and holding the watch. I remember looking at the small gold symbol on the back. He had said I could inherit it. When he died last November, I was hoping for it. His current wife said I could not have it. Not sure what she did with it. Since I found your channel I have been nostalgic about the watch. You take lots of care in your restorations. I can feel the passion for the restorations. Keep up the excellent work. Thank you.

@richrollin1596 Год назад

I’m addicted to this channel lol. This guy shows everything A-Z properly 👌🏼… I thinx your voice is very crucial for this as well lol… Netflix should hire you for a national geographic documentary 😂

@ryeshyes2552 2 года назад

Lovely vid! Thank you! Pity its a redial: 'Automatic' sits too much to the left under 'Omega' hence it doesnt pass the MOY test. Also recommend you put back the tension ring as to avoid a gap between the edge of the dial and the case.

@ShockingPikachu Год назад

I dunno, I’ve heard the MOY test isn’t super reliable on the vintage watches a lot of times. Who knows ¯\_(ツ)_/¯

@NitinKumar-yl6tl 2 года назад

Great job and good learning experience for someone like me who’s looking to get into watch repair/restoration as a hobby - you have some great content on your channel! Would you mind doing a watch check at the beginning of your video so we can see what watches are a part of your collection and what you enjoy wearing?

@nyckhampson792 Месяц назад

I think that's my favourite restored watch, service so far... Woah...imagine the satisfaction, relief from the spring after all that tension it felt when the barrel bridge took off... Its wants to join SpaceX astronoughts.... They did a Moon landing watch OMEGA.. Awesome service Marshall... Credits to you

@dissy1994 Год назад

Honestly wish this watch had a display case back, cos that movement is beautiful

@gary_rumain_you_peons 2 года назад

Another great job, Marshall. My heart skipped a beat when that bridge went flying. I noticed you didn't wind down the mainspring like you normally do but I didn't think anything of it at the time. But I did wonder why you didn't hold you thumb over the bridge as you were prising it off.

@andytiller4528 2 года назад

P 0 0

@andytiller4528 2 года назад

P 0

@jcee8493 2 года назад

4:33 Zip, yay! I saw the balance unwind a bit when you loosened it and I knew from that it was what you thought it was. I'm curious, you paid $700 for essentially a broken watch but what's it worth now serviced and running?

@Royvdl 2 года назад

depends, but more than double

@ashoat2388 2 года назад

Agree on double+ - especially if it’s a popular model or style. From what I’ve seen, Constellations and pie-pans are generally popular.

@user-sy1ed9ex5m 2 года назад

A nice Constellation pie-pan in this configuration is around 1500-2500 USD. All gold ones, those with black dial and with an original bracelet are a lot more.

@davidp2of3 Год назад

When you clocked it, that's an induction the main spring was still loaded. I've only watched your channel, it's all I know about watches. And I expected you to power it down after you clocked it. Great lesson.

@devonshire56 4 месяца назад

I too do this as a hobby using minimalist tools. I like it that my friends trust me with their watches, most of which were handed down to them and have a lot of memories attached. I take on the ones I know I can repair and put batteries in the rest.

@PrometheusZandski 2 года назад

Amazing reveal at the end. That was a bit of a bumpy road. Thank you so much for keeping in all the material. It's good to see mistakes and how to recover from them. Fantastic job.