Oiling A Sewing Machine | Singer Heavy Duty | Automatic Needle Threader

Подписаться 2,7 тыс.

Просмотров 75 тыс.

50% 1

Learn how to oil your sewing machine. Singer Heavy Duty 4452 and 4432
Singer Heavy Duty 4452: amzn.to/3csY6nI
Singer Heavy Duty 4432: amzn.to/3wYIFvk
Etsy Shop: www.etsy.com/shop/tmrtours
** TOOLS **
Machine Oil: amzn.to/2T9mqUW
Bobbins - amzn.to/3tBsDG5
Fiskar's Shears - amzn.to/39PuC0r
Snips - amzn.to/35B5d7c
Seam ripper - amzn.to/36AlDxR
Pliers - amzn.to/39QabQM
Watch my Baby Yoda Plushie Tutorial: FREE PATTERN included!
• BABY YODA Stuffed Anim...
#sewing #sewingtutorial #sewingwithstacy

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 123

@cherrylow9818 8 месяцев назад

Ive just started using my new Singer Sewing Machine 4423. I had no idea the machine needed oil 😮. Thank god I found your Chanel 😊 - I threw my last machine out most likely because I never used oil.

@sewingwithstacy 8 месяцев назад

Glad I could help!

@theirmom4723 9 месяцев назад

This is by far the BEST video on how to oil the machine and use the needle threader. Thank you

@sewingwithstacy 9 месяцев назад

Wow, thank you! Glad it was helpful!

@vernonbowling5310 3 года назад

I could never find this information in the manual that Singer has a new purchaser download for reference. Thank you for the information. I just subscribed so keep them coming.

@sewingwithstacy 2 года назад

Thank you. I hope to do LOTS more in 2022.

@L.i.s.a.... 2 года назад

BEST maintenance video using Singer Heavy Duty 4452. Visually clear, perfect close up, well spoken and understandable directions. It is such a huge relief to find this video (and I've seen many). Bookmark this one! Good job, thank you!

@sewingwithstacy 2 года назад

Wow, thanks!

@mariagdesjardin1000 2 года назад

Ah, hell- I've been using the threading aid the hard way! That wasn't what I came here looking for, but muchos ThankYous for the tip : )

@sewingwithstacy 2 года назад

Happy sewing!

@ln3527 6 месяцев назад

Oh my, things have changed! Who'd have known a wick is what they use these days! Thank you for the tute. I've just cleaned and oiled it AND I don't have to struggle with threading it now either.

@sewingwithstacy 5 месяцев назад

Yay!!

@Sean-qk7ps Год назад

Good visual of TWO drops only onto the center wick. Stable video.

@sewingwithstacy Год назад

thanks!

@JohnBau 9 месяцев назад

Singer should link to your video to show how to use the needle threader !

@sewingwithstacy 8 месяцев назад

Too kind!

@eduardoespinoza3421 Год назад

YES I JUST DID IT! Thank you so much for a very detailed tutorial

@sewingwithstacy 11 месяцев назад

Glad it helped!

@1437Ziggie 2 года назад

Bravo! Thanks for the clear explanation.

@sewingwithstacy 2 года назад

Happy to help!

@cfarlow5830 8 месяцев назад

Thank you for such a clear concise demonstration.

@sewingwithstacy 8 месяцев назад

You are welcome!

@janetchaney8258 2 года назад

Thanks for showing me the auto needle threader. I never knew what purpose it served until kno

@sewingwithstacy 2 года назад

No problem!

@maribethb5138 2 года назад

Thank you, this is so helpful!

@sewingwithstacy 2 года назад

You're so welcome!

@CaritaFelizzSFO 6 месяцев назад

Thank you for this video too. Just saw how to clean your sewing machine. I will be cleaning my sister's machine this week. 🤞

@sewingwithstacy 5 месяцев назад

You are so welcome! Have fun!

@jenniferprescod3034 2 года назад

Simple and very encouraging

@sewingwithstacy 2 года назад

Hope it helps you with your projects!

@nigelolympia Год назад

Hi there and thanks for making this video. I dug a bit and found that there are two felt bushings up top, and two below in the drive linkage that need to also be maintained. Also there are multiple pivot points above the needle that need oil also. Pretty much everywhere moving parts touch. Just wanted to make sure that you don't wear out points of your machine not knowing that there was a way to preserve them. Thanks a bunch for making videos for all of us!!! My best, -Nigel

@sewingwithstacy Год назад

Thanks!

@cornelianiber1414 10 месяцев назад

Thanks for this video

@LitoGeorge 7 месяцев назад

Thanks to you Nigel, for this insightful and helpful comment. Removing the bottom plaastic areas (just about 8 screws) reveals the areas that are greased, need to be greased, and the two felt bushings that you refer to. Honestly, you should do a video of it and monetize it. Very helpful. Though my machine is NEW, I oiled it up properly and she's now 80% quieter to my surprise. One thing: there is a plastic cam/ gear combo on the right back top of the machine that works with the feed dogs. This looks like it needs maintenance. But that will require removing the whole top casing I think. Another day......

@elizabetha2056 2 года назад

So helpful!! :o) God Bless from a Great Gran in MN

@sewingwithstacy 2 года назад

Glad it was helpful!

@randyc8171 2 года назад

It is more important to oil the needle bar and it's linkage.

@sewingwithstacy 10 месяцев назад

Yes it’s all important really

@catherineanne5704 3 года назад

Awesome, thanks so much.

@sewingwithstacy 2 года назад

You are welcome! Happy Sewing!

@beatriceherry1724 2 года назад

Thank you !

@sewingwithstacy 2 года назад

You are welcome! Hope your projects are going well!

@linel.3521 Месяц назад

Thank you !!!!!! ;)

@sewingwithstacy 24 дня назад

No problem!

@reneetaylor6376 2 года назад

OMG thank you for this video, it was soooooo helpful

@sewingwithstacy 2 года назад

No problem!

@sheryloliver782 Год назад

Hello Stacey, my 4432 is stuck on backwards. Do you have any suggestions?

@fezabeauty 2 года назад

Thank you so much 💓

@sewingwithstacy 2 года назад

You're welcome 😊

@nancylee2422 Месяц назад

Nowhere in my maual for the 9340 Singer sewing machine does it say to oil it! Crazy!

@sewingwithstacy Месяц назад

They say that these machines come “oiled for life” but that’s only if you use it like once a year, and even then, it will eventually get gummy. So silly!

@aeroboy002 2 года назад

Nice clean video thanks fromSouth India

@sewingwithstacy 2 года назад

Thanks for watching!

@dollymommadesign 7 месяцев назад

Thank you sooooo much!!!

@sewingwithstacy 7 месяцев назад

You're welcome!

@ellysacraftgarage5046 2 года назад

thankyou so much

@sewingwithstacy 2 года назад

You are so welcome!

@colinrawlinson2658 9 месяцев назад

Thanks for that 😊

@sewingwithstacy 8 месяцев назад

No problem 😊

@ronaldlima1520 Год назад

Muito obrigado

@sewingwithstacy Год назад

You are welcome!

@zeinabhaghshenas 3 месяца назад

Hi, thank you for sharing this video. It is helpful, I was wondering if I can oil the machine without taking the arm off?

@sewingwithstacy 3 месяца назад

As long as you can get to the wick, you can oil it!

@user-rv3ys7su3e 2 года назад

Hi Stacy good video on the needle threader. I have 4432…How do you get the top and back off this machine. The two screws on top come out and only one on back but top will not come off! Help please. Thanks!

@sewingwithstacy 2 года назад

The plastic that the machine is made of has a bit of a 'clip' if you will to it. So once it's unscrewed, it doesn't just come off, you do need a small amount of force to pull it off.

@bobgalvan Год назад

Great video, If the theader little wire is broken where can i buy a replacement

@sewingwithstacy Год назад

Hey Bob, not sure what part you mean, but if it's the last thread guide before the thread goes into the needle, you might be able to add on a bit of floral wire wrapped around the remaining piece to complete the guide bar.

@covenantogunmade1055 11 месяцев назад

Heyy, thank you for this video I didn't get my machine brand new and I just noticed there's no wick in there, what can I put in there or should I just oil it that way? Thank you 😊

@sewingwithstacy 10 месяцев назад

You should be able to order a replacement online. I wouldn’t suggest using an alternative.

@lindaabuhasou2635 Год назад

Great video. More than likely I need to oil my machine. Been about two years now since I purchased this machine. With sewing a lot of flannel it is sure to need oiling. Those screws where the bobbin housing is extremely tight and can't undo with key provided with machine. Any suggestions? Tx 4 in advance

@sewingwithstacy Год назад

You might be able to get the bobbin housing out without removing the arm. I have a few of these machines but can't seem to get any of them to let it loose without unscrewing the guide arm. If you still can't, I would just continue to gently try and get them worked loose so you can get in there.

@Esther-yu1sv Год назад

Put a drop of oil on the screw and around it, let it soak inti the joint, then try unscrewing it

@hsmilesh 2 года назад

My machine had zero oil in the wick. Thanks for the video, my machine sounded absolutely terrible and I couldn’t figure out why.

@sewingwithstacy 2 года назад

Glad it helped

@user-ds6zg5mr4t 5 месяцев назад

I've followed the instructions to oil my singer 4452 machine. I have replaced the bobbin house leaving it a bit loose for the thread to pass through but now my machine won't work properly. The thread seems to catch and I can't get it to stitch now.

@sewingwithstacy 5 месяцев назад

best thing to try is unthreading and rethreading completely.

@user-ds6zg5mr4t 5 месяцев назад

@@sewingwithstacyOmg that worked! Thank you!

@ladyvoldemort6832 Месяц назад

Question!! Does the upper part need oiling as well? I can clearly hear the piston complaining if I use the machine very slowly. At normal speed I wouldn’t hear it, but… 👀

@sewingwithstacy Месяц назад

Yes! You can and should also oil the needle bar. You have to remove the upper cover from the side. (Screw is near the thread cutter.) then add a few drops the the solid bar that runs vertically. It should help!

@taniadoorley Год назад

Hey there! I've been told not to use a medal bobbin? What kind are you using ? I have the exact same machine!

@sewingwithstacy Год назад

Most manufacturers will say not to because the bobbin housing is plastic and any metal burs or imperfections can/could damage the bobbin housing. I have found that if you just buy good metal bobbins, that shouldn't be the case. Also, if you start using metal, you should only use metal. You should not go back and fourth between plastic and metal.

@KarjianaCadet 2 года назад

I accidentally pushed the wick for the oil further down its opening and now I can't get to it with tweezers. Do I have to get it from the bottom of the machine by disassembling it or is there another way to retrieve it?

@sewingwithstacy 2 года назад

No worries! Just let it be. Odds are that you didn't push it down too far and with normal use, it will work its way back up on its own.

@nuarootham1261 2 года назад

What model of the Singer sewing machine are you using? I noticed you use metal bobbins with that. How come Singer advised me to only use plastic class 15 bobbins and not metal.

@sewingwithstacy 2 года назад

Singer 4452. I only use metal. Once your bobbin housing becomes accustomed to the shape of your bobbins, you cannot switch. More on the great bobbin debate later.

@judiesouder9261 Год назад

Hello I need help with the tensions.. i don't know what they are or where they are? thank you

@sewingwithstacy Год назад

Tensions should only be adjusted if you are experiencing looping of your stitches.

@shieladerozier289 2 месяца назад

I need to oil top

@sewingwithstacy 2 месяца назад

you have to remove your upper machine cover and add oil to the uptake bar.

@esthyjoels8851 Год назад

How often do we oil the sewing machine i use heavy duty denim

@sewingwithstacy Год назад

Depends on how often you are using your machine. I sew professionally so I sew many hours a day every day and check my oil about once a month. Always check to see if it needs it before just adding it.

@TruthIsARuin Год назад

@SewingWithStacey Hi. So, I'm hoping I can get an opinion on something... I have a store bought weighted blanket with the the little glass beads inside. I'm wondering if you think it would be a bad idea to sew through it. Idk if it would damage my sewing machine if the needle came straight down on any of the little beads. It's pretty much brand new, and I hated the thought of throwing it away. I've been trying to find someone to take the thing, but nobody wants it. Probably about the 25th time moving the thing from one spot to another, I started thinking maybe I could make a few door sweep, draft blocker dealies out of it. But now I'm just sitting here staring at it, worried it might jam my machine. Idk... Just hoping I can get an opinion or two before I have at it. Thanks in advance

@sewingwithstacy Год назад

Hey, great question. So I make a lot of heated corn bags. What I usually have to do is make small compartments and pin back the corn to make sure I don’t hit any kernels with the needle. For your project, I would not advise putting that through the machine unless you can safely clear away all the glass beads in are for sure only sewing through fabric. If the needle comes down on one of those glass beads, it could shatter the needle or worse.

@TruthIsARuin Год назад

@@sewingwithstacy Yeah, I got a little nervous and went safe. I just made one with rice instead. Thanks so much for getting back. 😊 I appreciate it

@sewingwithstacy Год назад

@@TruthIsARuin no problem! glad it worked out!

@KetiTeacher Год назад

4452 machine doesn't need oiling upper portion? Just at bobbin?

@sewingwithstacy 11 месяцев назад

Yes you can oil the upper but not nearly as frequently as the lower as the lower builds up lint and sucks up more oil.

@lizabethduran4417 2 года назад

Can the sewing oil be substituted

@sewingwithstacy 2 года назад

Only use machine oil in your machine. I would not recommend using anything else as it could damage the machinery.

@carolynsteele-pv1ls Месяц назад

Fumbled the little screw while trying to put the little plate back on and it fell down into the bottom. What a hassle.

@sewingwithstacy Месяц назад

I’ve done it once before too! A little magnet stick helped me get it out!

@carolynsteele-pv1ls Месяц назад

@@sewingwithstacy Good idea!

@janerhoadesart 5 месяцев назад

Agh I didn’t know the bobbin housing arm is supposed to come out. Mine will NOT budge 😭

@sewingwithstacy 5 месяцев назад

No worries, sometimes you can move the flywheel by hand until the hook race is at the back and the bobbin housing will lift out. So turn the fly wheel by hand and gently lift the bobbin housing until it comes free.

@PugsleyFarina Месяц назад

My machine doesn't have that cotton wick. So, what should I do?

@sewingwithstacy Месяц назад

Hmmm… that idk. Maybe check with customer service. If you have this model, it may be a factory defect.

@bellaMoOn30 Год назад

i sub ❤️❤️❤️❤️

@sewingwithstacy Год назад

Thanks!

@PatsyMoody-WY 8 месяцев назад

My machine locks up several times. The wheel is hard to turn and it basically unable to sew. When That happens, I take the plate out and the bobbin housing out, double check it but it keeps locking up. What can I do?

@sewingwithstacy 8 месяцев назад

Have you ever done a thorough cleaning of your machine? You might have threads caught up underneath that could be holding up your machine.

@ahmedgad7240 9 месяцев назад

How to oil the machine ... thanks

@sewingwithstacy 8 месяцев назад

Watch the video! 😉

@tonyhawk1948 5 месяцев назад

Who up oiling up they machine

@sewingwithstacy 5 месяцев назад

if you sew a lot, you should! it's kind of like getting oil changes on your car.

@outdoornuggets1813 Год назад

That is not how sewing machine service techs oil the 4452. Black oil is a sign of metal wear which means the lubricant being used is not protecting the metal.

@sewingwithstacy Год назад

Thanks for the input. I'm oiling per the manufacturer guidelines for this machine.

@pennymason102 Год назад

@@sewingwithstacy I tried to find out about oiling after use and could not find anything from singer, so I appreciate this so much. I regularly oiled by old machine, and my mother's 301 which is still working after 66 years .