One of the last chances of the season to capture the greenery // GepRC Cinelog25 V2 Review 

Meh, I do realestate and while the o3 is great for flying, it is not as good for footage, gopro still superior when it comes to dynamic range, low light quality, and recording vertically if you need it.

This is the exact idea Im going for however I was thinking of using the speedybee meteor led would I need a voltage regulator or is it just solder and go?

Thank you for the feedback. neighbors are fine with the flying. In my 7 years not one complaint. I don't fly if they are outside enjoying themselves, and if they come out while I am flying I shut it down for another flight or two unless they tell me to keep on flying. I have a running text with the neighbors as well.

Nice. Provided you have a big open space I am sure you will be way out there.

Thanks for reply. Yes, I should have mentioned I'm on a 160 acre ranch surrounded by vacant state land for miles and very fortunate to not have to worry about bothering anyone.@@NickBurnsFPV

Fair enough!

Does this drone come with a Walksnail version?!🤔

@@A.Alsulaiman01 I don't think so.

@@A.Alsulaiman01 Not according to the product page. Linked in the video description.

Lol yea loud loud

Nice, I had totally forgotten you have the v1. Memory not so good in that regard :)

Interesting. What was the tipping point to switch over the walksnail?

@@NickBurnsFPV I guess the v2 goggles never fit nicely on my face, tried different foam padding but it never felt comfortable, so I got fed up with it. And I could not get my whoop fitted with it because of the weight. Walksnail is a much better versatile system imo. And the O3 is to expensive for me right now.

@@apachesmokewoundedsniper Yea, i really didn't like how the goggles 2 fit me either. I bought some aftermarket foam and make some modifications. its much better now but not great.

Good to know thank you

Thats a good question. I am not sure I have one off the top of my head in the 2.5inch category for the lightest. The flywhoo flylens85 is likely the lightest that would be capable of carrying a naked gopro. It would be most capable of flat smooth flying.

Okay. Thank you for the feedback

Interesting. i haven't had many reports of vista/link faulting with overheating.

Do you have more than one of the same batteries I am using in the video? I presume the batteries in question are GNB as I have so many of those. Another question would be have they been flown down far below 3.5v/cell, how far below and the frequency. It also possible that the batteries came from a bad batch, which doesn't happen much but is something that has happened over the years.

​@@NickBurnsFPV I have 2 of these and they both tested the same. These are brand new batteries and I'm careful not to run under min voltage, or like 15% of full charge. I was pretty shocked when on my first flight I was only getting a little over 2 minutes and that's when I decided to break out all of my 4s and run a test. None of my other 4S batteries are HV like the 650. Comparing weights the 650 seems too light, but maybe the HV chemistry makes that possible? I get similar results on the Babyhawk 2, but with much improved flight times. I also learned that the Babyhawk is surprisingly efficient. Thanks for the reply, much appreciated.

@@wa389 The batteries your testing are exactly like the 4s 650mah I show on screen? The flower print on the label? If so I really can't explain the difference outside of the previous replies. Maybe did they change the props to a different set, or more weight with an external hd camera mounted that is heavier than the naked hero 9 I tested?

I have only tried the XI35. The are really much different. 3.5inch props will carry far more weight for battery/flight time, or external HD camera.

I like the flylen85 a lot. Its by far my favorite in this category so far.

@@NickBurnsFPV Yeah the fly lens 85 looks nice for acro and it's also smaller. My main concern about that one is having a modified (naked) dji 03 air unit. I hope those last as long as one that is unmodified since they don't have the heat sinks. But I've not seen any major issues with modding the 03 air unit so maybe things will be fine in the long term. Thanks for all of your awesome videos! I'm glad you take the time to fly everything aggressively, It's good to know what can handle some nice acro and what can't. Especially for me because I'm not interested much in cinematic video. The fly lens 85 seems to check most of the boxes for what I'm looking for.

@@hallfatherofthree7022 I believe they have an option of using the regular or "heavy" O3 as well.

There is no way to post images in youtube comments. Best option is going to be via geprc support.

Joshua Bardwell can help you.

I figured it out shortly after posting this. Turns out that the USB port won’t power on the receiver like my other quads. As soon as I plugged in a battery everything was bound in seconds. For the UART stuff… I just had to take the thing apart and see where everything was soldered to. Haha 😆 lessons learned

@@TrevorBrown753 Good you got it figured out. I am wondering why in the wide wide world GepRC hasn't posted the cli, they have the 35v2 posted. I sent them a message. Might just be something someone forgot to do, but I also have had at least 3 other questions where the cli would have solved the issue.

I have about 6 of them. The red labels preform pretty well. For performance flights the flower labeled gnbs perform better for me.

I would suggest the cinelog20 as its smaller lighter and could be more durable.

gotcha

We certainly can run those cells in the slower flat flight. They certainly won't help in any sort of faster/freestyle flight.

I haven't broken anything. I have knocked over pictures on the piano, but that is as close as I have gotten to breaking anything other than the quad :)

If the gopro is a full sized with battery go pro we will want at least a 2.5inch prop. A 3inch will handle the additional weight better. I think the cinelog 25 and cinebot 30 are solid choices, I think 3.5inch cinewhoops would have some specific challenging flying through a house, but its possible with the proper skill set.

Thanks!!

nice, thanks for confirming.

lol. The clicks aren't as important as the feedback I might get.

@@NickBurnsFPV Honestly, I think there’s enough content out there on the older DJI system. People generally know what’s up with it by now. The o3 is new and hot and can be switched out in most quads with the “vistas” and the flight characteristics will basically be the same. Just say, “this is the o3, but the older air units will fly the same… buuut the image won’t be as good.” Aaaaaaand you get them clicks. 😜 However, I get your point… there are lots of non-o3 DJI pilots. 🤷‍♂️ It’s a tough one.

oh no, someone snuck in right before you. Sorry, but so so close to first.

@@NickBurnsFPV The good thing is that i enjoy your content eventually I'll be first. See you on the next video

no, same rates and no expo all the time. My rates in this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-llpHcWQx8q8.html

cool . saved the video... great review. thanks..

IMHO there isn't much to show for the inside. Generally its an AIO and the vtx. We can see all the screws and posts holding the prop protection to the carbon from the outside.

@@NickBurnsFPV i guess now frames are better but under is my experience i bought beta 95x and the disassembly of that quad was horrific 1. Drop all four motors wires over prop gaurd but under carbon frame 2. AIO has to be soldered after mounting motors too difficult 3. Rx module is over aio which has to be done while aio is out ( if you fry it hell) 4. Vista / RL antenna has to be in position for it all to fit and I've broken two wires I simply stomped on it to my hearts content and after taking out vista 😂😂😂😂😂😂

While I don't have a gopro 11 or a mini, I only have naked/lite gopros, I can tell you that any small propped quad doesn't fly well when we add a lot of weight. The smaller the prop size the more sensitive the quad is to added weight.

acro

RU-vid comments don't allow enough characters for the full cli dump. this is the pid profile # profile 0 set profile_name = - set dterm_lpf1_dyn_min_hz = 67 set dterm_lpf1_dyn_max_hz = 135 set dterm_lpf1_dyn_expo = 5 set dterm_lpf1_type = PT1 set dterm_lpf1_static_hz = 67 set dterm_lpf2_type = PT1 set dterm_lpf2_static_hz = 135 set dterm_notch_hz = 0 set dterm_notch_cutoff = 0 set vbat_sag_compensation = 0 set pid_at_min_throttle = ON set anti_gravity_gain = 100 set anti_gravity_cutoff_hz = 5 set anti_gravity_p_gain = 100 set acc_limit_yaw = 0 set acc_limit = 0 set crash_dthreshold = 50 set crash_gthreshold = 400 set crash_setpoint_threshold = 350 set crash_time = 500 set crash_delay = 0 set crash_recovery_angle = 10 set crash_recovery_rate = 100 set crash_limit_yaw = 200 set crash_recovery = OFF set iterm_rotation = OFF set iterm_relax = RP set iterm_relax_type = SETPOINT set iterm_relax_cutoff = 15 set iterm_windup = 85 set iterm_limit = 400 set pidsum_limit = 500 set pidsum_limit_yaw = 400 set yaw_lowpass_hz = 100 set throttle_boost = 5 set throttle_boost_cutoff = 15 set p_pitch = 76 set i_pitch = 95 set d_pitch = 63 set f_pitch = 132 set p_roll = 58 set i_roll = 72 set d_roll = 46 set f_roll = 101 set p_yaw = 58 set i_yaw = 72 set d_yaw = 0 set f_yaw = 101 set angle_p_gain = 80 set angle_feedforward = 50 set angle_feedforward_smoothing_ms = 80 set angle_limit = 60 set angle_earth_ref = 100 set horizon_level_strength = 75 set horizon_limit_sticks = 75 set horizon_limit_degrees = 135 set horizon_ignore_sticks = OFF set horizon_delay_ms = 500 set abs_control_gain = 0 set abs_control_limit = 90 set abs_control_error_limit = 20 set abs_control_cutoff = 11 set use_integrated_yaw = OFF set integrated_yaw_relax = 200 set d_min_roll = 46 set d_min_pitch = 63 set d_min_yaw = 0 set d_max_gain = 37 set d_max_advance = 20 set motor_output_limit = 100 set auto_profile_cell_count = 0 set launch_control_mode = NORMAL set launch_trigger_allow_reset = ON set launch_trigger_throttle_percent = 20 set launch_angle_limit = 0 set launch_control_gain = 40 set thrust_linear = 0 set transient_throttle_limit = 0 set feedforward_transition = 0 set feedforward_averaging = 2_POINT set feedforward_smooth_factor = 65 set feedforward_jitter_factor = 7 set feedforward_boost = 15 set feedforward_max_rate_limit = 90 set dyn_idle_min_rpm = 0 set dyn_idle_p_gain = 50 set dyn_idle_i_gain = 50 set dyn_idle_d_gain = 50 set dyn_idle_max_increase = 150 set dyn_idle_start_increase = 50 set level_race_mode = OFF set simplified_pids_mode = RPY set simplified_master_multiplier = 130 set simplified_i_gain = 70 set simplified_d_gain = 120 set simplified_pi_gain = 100 set simplified_dmax_gain = 0 set simplified_feedforward_gain = 65 set simplified_pitch_d_gain = 120 set simplified_pitch_pi_gain = 125 set simplified_dterm_filter = ON set simplified_dterm_filter_multiplier = 90 set tpa_mode = PD set tpa_rate = 50 set tpa_breakpoint = 1350

@@NickBurnsFPV luv u 😍

I think at some point there might be an official statement on the DJI vs WS issue.

A diff is far to large to share in youtube comments. typically Geprc post cli dumps here geprc.com/downloads/ but the cinelog25 v2 isn't up yet.

huh? I see it available from geprc, aliexpress, rcdrone and banggood.

yes, they are generally very loud. Much louder than if there were no prop protection

lol. No I am pretty isolated, I don't think there is anyone in my town that flies fpv.