One Thing I've Never Done On A Dirt Bike Before! 

Happy Monday everyone! First 10 orders at www.prymemx.com get free shipping! Use the code "FIVE" at checkout.

The finish on the parts looked amazing! Can't wait to see the whole bike back together!

I'm so happy for you man! I've been watching your videos for a while now and might I say you are probably the smartest person I've ever had the privilege of watching when it comes to dirt bikes. You inspire me to do things with motors I thought I'd never do because I figured I'd screw up but then I see you do it and you make it seem like a piece of cake! I hope I can be as good of a mechanic as you someday. Congratulations on the next step of your journey I can't wait to see more!

Another GREAT video.Thanks for sharing all your knowledge.My oldest brought home a 94 KDX200 in a thousand pieces and it needs a full frame off resto,all the way to a new crank.We are using a lot of you cleaning tips to get it back to what it was in it's prime.

Your tips and techniques are awesome thanks

Congrats Cameron! Excited for you, your success and your future! Pryme MX looks awesome. Looks like I will be purchasing one of those sweet hats!

WOW! great video! keep it coming, cant wait for this cr250 to be finished. next cr500AF rebuild!

Best video series on RU-vid for sure! Can’t wait till the next video! Your attention to detail is impeccable!

Love your vids. Keep it up this is basically the only thing I watch on RU-vid now. Helped me a lot when I rebuilt the forks on my 03 cr250

Love your videos and cant wait to see the cr put back together. keep up the good work.

Cameron, another great video. Glad to hear you’re in your prime. Just remember, if you want to stay in your prime, you must take care of your health. Without it, you’ve got nothing. Please wear goggles when using grinder and a respirator. You’re still young now but breathing in all the aluminum dust will mess up your lungs at a later time in life. I’m 62 and still building and restoration of bikes. You want to be doing it in 40 years from now. You never lose the passion. I didn’t.

My friend I'm 54 years old and I've pretty much done the same as you all my life. Doing the best I could with what I could figure out. After years of doing that I shifted my career into being a race car chassis builder, CNC machinist, welder, metal fab specialist. Went to work is several very high tech shops with access to all the best equipment. Now as an old man working from my own shop without all the high tech equipment I find it very difficult going back to doing everything with nothing again. Stuff I can easily do but going backwards and doing it the hard way is difficult to force myself to do. If I can help anyone from my mistakes I want to do that. Be careful to not follow my path because it kills the joy of what you do. Watching you takes me back to my pryme again and reminds me why I followed the path I did. Most of what you do isn't the best way of accomplishing the task but its a way and that's what matters. Once you've been exposed to the best way it becomes so hard going back to just doing stuff a way. Its because you know how much you're beating your head against the way. As I watched this video I was thinking a tumbler would knock that out with ease with the correct media. But most people don't own a tumbler large enough to surface parts that size.

personally, I don't like shiney. But I do like that you are trying new things! Keep up the good work!

hell yea man!! never seen that finish on suspension before, looks dope. bout time your dropping some merch!

Love Cameron work best videos on RU-vid from start to finish. Happy to see you doing better. Much love and respect bro keep up all the great work.

Really like the videos, they have truly helped me with working on the 2 bikes I own now. Please keep them coming and don't stop what you are doing. Really.

Sick video and website! I'm definitely going to be ordering things

That is a really clean and smooth finish dude!. And that short clip was beautiful, I am not a dirtbike guy, but you really make me want to buy one.

awesome dude, those parts look fresh! and congrats with your ventures into Pryme MX

Great job! I can tell you love your work it shows, Keep it up!!!

Man you are teaching us how our dirt bikes looks factory!, Thank bro!! #Pryme

Best motocross RU-vidr ever. Keep up the great work

Looks fantastic Camron. Also, congrats on the business. Would definitely order some grips and such. I’ll be watching. 😎

Love the vid and your work!

Very nice looking parts! Keep up the good work brother!🤙🏻

All I can say is thanks for the awesome videos man! Best of luck with #Pryme

Yoooo you got your own company thats amazing

You deserve it all man, have picked up more ideas and things i never new about bikes off your channel!!! My hat goes off to u man keep it real man and continue youtube!!! Inspiring

cool vid man love all your vids keep making more

Awesome that you started up a business great to see you take a big step can’t wait to see your career advance and grow keep it up !!!!!

wicked stuff Cameron... hat looks sick, really clean and simple..

Your videos are so theraputic! You keep your bikes so clean i wouldnt want to ride them in fear of getting them dirty id just sit an admire them instead. Nicly done im gona try this method on the tripple trees on a kdx 200 im restoring

Love this channel!!!

I cannot wait to see this put together. This 2 stroke is gonna look so sick

sweet results as allways man , awsome stuff

Prime for sure! Thank you for sharing!

Follow your passion that’s where the fun is. Carry on 👍🏽👍🏽👍🏽

Man I love your enthusiasm! I’m not a big hat person, so I can not wait until you have hoodies and shirts! I would love to be the first one to get a #prymemx merch!

Id definitely buy some grips

They look nice when they are polished but the anodizing on the shock body is there to prevent corrosion and also adding a protective layer to the shock.

The polished parts turned out mint👌 Really nice video😄

Thank you..I appreciate your passion

Hope you be the best of yourself always. Keep it up, mentor

You got me to take up my dirt riding agin after 15 years of roadracing! Got me a CRF450!! Way to powerful for me but my local track is a sandtrack so whent for power! God job//Kalle from sweden

best of luck with Pryme MX !

#Pryme

Love the Logo bro! Congrats on starting your own company, just placed my first order. Keep up the good work, your Killin it.

Great videos,Thank you for sharing.🙏🙏

Just rebuilt my 93 kx250 rear shock. Dude you made this one look epic! Props

keep it up man, great content as always:))

Cameron, I use my Dremel with different bits for polishing aluminum in places the bench grinder can’t reach. Works like a charm. Dremels rock.

Great video!!! Your channel is growing like a weed!! Keep up the good videos man!

I would buy your grips 100% I say you have a enough knowledge to design some great grips and even bar pads I would buy

solid work, my suspension guy does the same thing and anodizes the shock bodies after they are smoothed out, turns out looking like a works shock

Nice video keep it up my man!

I was just doing my shock body this week! I had not seen this video, wish i had! I was doing it with sandpaper, by hand, a wire brush, finer sandpaper and polish. It did not work out well at all. So i decided to paint. First attempt, tuesday, not flash, then better after sanding back and re painting. But i like your work so much better! Ill give your methods a go (i dont have a bench grider tho), with the brake calipers.

Damn have to buy one cap but bro you have to make mx gear. Keep up the good work!

Love the brushed look you could offer that sort of thing to the mx croud never seen it out there. Greight vids by the way very thorough and profeshenell.

Hey Cameron, great job on yet another smart and informative video. Gave me some ideas for finishes on our supermoto bike build. FYI: I would guess you know this already, but be sure to wear a respirator when working with aluminum in any manner that creates any kind of airborne dust. Aluminum dust breathed (or absorbed) in the body does nasty things to the electrical activity in the brain, and is very hard to remove, being a light metal, once in the blood, brain, tissue and nervous system. I learned this by health-damaging personal experience doing metalwork with aluminum 20 years ago. You're such an incredible young man and contribute so much to all of us out here, just want you to be safe and sound and around a LONG TIME! Take care.

Awesome Video keep it going ! You inspired me to rebuild a bike by myself:-) Greetings from Germany

Tip for anyone trying to clean up a shock like this.. If you get a small sanding belt and turn it inside out, put a rubber drum fitting on your drill and use that to drive the sanding belt while it's hooked around the cylindrical parts of the shock you can achieve a perfect finish in very little time and you don't have to worry about compromising the perfect roundness of the shock body like you would using a grinder

Great videos, and congrats on your company. Would love to see a video on bench grinder comparisons, your Baldor is big bucks but what would get good for those of us on a budget ?

Awesome video man

Nice work man!

Hey man, love your videos, awesome inspiration! Do you use any sprays or sealants to maintain the finish on aluminium parts?

Tes vidéos sont superbes, continue !! :)

Wow nice job on them part's how long did it take and keep up the good work Cameron

Great video keep up the good work 👍🙂🙂

So sick 🤘🏼🤙🏼

Videos are so helpful thanks alot

Clever! I like it !!

Nice vid. I can't wait till he films more videos where he works on his motocross track.

Cameron get a California Air Tools compressor it is the most Quiet air compressor you can buy. it will be able to spin that attachments and many others.

Nice, time to buy some merch!!!!!

Looks great

Good work bud!!!

I bet that adds some serious hp! Can't say I haven't done similar things now I'm like for what . 😁Cheers bro you go hard !

I love to hear the sound of a 2 stroke again! Too bad that I crashed my RM125 :(.....! Definitely would have asked you to fix it if I lived in the same place.

I have tip on Aluminium parts ;) Do not use these items, use cloth disc with polishing paste. But this is good too. Nice video love it :)

Amazing video 😉🤙🏻

Wow came out really nice

God with you man and looking forward..

Love your videos. Can't hep but remember the opportunity costs factor. You're a smart man, is your time really worth getting stuff like the forks and rear shock polished? Could be making lots of money there.

full polished dirtbike ;) now that would look crazy

Cool video. How can you clean the top front shocks on the gold area?

I did a trx450r swing arm by hand,took for ever but came out dope

You got me for whatever you put out brother I know it will be quality with love sprinkled on top and that shit last the test of time!!! lol

A quick job with the brass wheel brush would also have put a shine to the shock threads without any damage.

Great Video Dude have you ever considered clear coating your parts after buffing them to retain the finish ? Keep up the videos !

Curious about something because I'm also doing a cr250 build. When you polish and strip the casting to frame/swing arm/ forks do you need to protect them with any spray constantly or will they not be harmed by rust ect.?

Great vid

Your vids r the best brother

Love you man

This cr250 is gonna look amazing when its done. Maybe dirtbike magazine will hit u up and see if they could feature the finished bike....

Awesome!

Hello from Spain man! Awesome work and absolutely unique!! One question for such a wise like you: knowing that you are a 2 stroke lover, how do you clean the usual rust of the pipes? I've searching on internet and particularly in RU-vid, and I think that there is not a good video about it. I believe it would be great and certainly interesting for the RU-vid community if such an expert like you will produce it ;). Regards man!

Just make your own Dremel scotch bright roll! Cut circles layer , use 2 liter bottle plastic as washers there you go!

Its litterally my dream to be like you cant wait for more videos

Gotta lot of patience Cameron done beautifully just checked the hats out too they’re sick gonna place a order soon #PrymeMx

That sound 👌