Our 190 Shifter Kart is FAST, but has a HUGE Problem

Подписаться 1,2 млн

Просмотров 174 тыс.

50% 1

Our 190cc 5 speed shifter kart is fast! We do have a huge problem with our home made yard kart killer- an unknown driveline clunk that makes the chain come off. It could be a number of problems- our Zongshen 190cc 5 speed pit bike engine could be making so much power that its flexing the frame, we. could have worn out keys on our live axle, and it could all be made worse by bad gearing. In today's episode, we discover and try to fix the issues!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----------------Go Power Sports Parts Used in Today’s Video---------------
Tell them CarsandCameras sent you at checkout:
Fuel pump: bit.ly/3rC9ByU
Fuel line: bit.ly/32iAlNe
1” bore split sprocket hub: bit.ly/3aRYUlq
420 chain split sprockets: bit.ly/3kFMeRx
420 chain: bit.ly/2RL38UY
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Авто/Мото

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 515

@ActivityPhoto 2 года назад

Thanks guys for a year of great videos. I'm reliving my youth see you guys. Turned 75 this year but would love to do what you're doing. Unfortunately I don't think my old body would hold up very well. Keep up the good work looking forward to seeing you build a proper shop.

@flydaddy55 2 года назад

Turned 66 this year, loving these videos too, enough to build me an off road buggy, still working out some problems, but it's working pretty good, check it out.. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QIv9fr8XTrI.html

@nybergsgarage 2 года назад

@@flydaddy55 shameless self-plug, haha. checking out your video now.

@theupscriber65 2 года назад

@@flydaddy55 heck yeah. I watched your video and that thing looks fast! Check out my recent builds. No kits, custom designed a fabbed the suspension in my driveway and drilled the bolt pattern into custom wheels. ru-vid.comAnPGKHWMAPA?feature=share

@franciscopuga2660 2 года назад

@@flydaddy55 ⁹

@lifeononeweel3008 2 года назад

OMG YOU GUYS ARE AWESOME despite your old age you are doing what you like doing ❤❤❤ to ya all

@Todd_G_FPV 2 года назад

Always put your chain tensioner on the loose side when under load, putting it on the torque side defeats the purpose because it loosens up when on the throttle. You guys did a hell of a good job and this is my favorite build so far. Also Charles is a great addition to the team!

@wgas.3601 2 года назад

“Hotter than a stihl chainsaw in an East Tennessee pawn shop” was an instant subscribe

@twocvbloke 2 года назад

I love the way Charles avoids effing and jeffing when he gets burned, really does good work avoiding the need to fire up the family-friendly bleep machine... :P

@sergiosolis4538 2 года назад

Gotta love Charles' analogy, "it's only bad if you look at it"😄😄😄. They all come up with some gems.

@TaylorTobitt 2 года назад

“that was hotter than a chainsaw in a east TN pawn shop” as a fellow Tennessean, i can confirm 😂😂😂

@nelsondavis4310 2 года назад

A Stihl chainsaw.

@CarsandCameras 2 года назад

We’ll get it dialed in no time😉

@mrrooter601 2 года назад

DIALED

@jrseay9218 2 года назад

yall should do a build with grind hard plumbing co.

@forkboy3309 2 года назад

just send it

@sheldonlogan2851 2 года назад

You guys really don't realize how much you inspire us small town boys too keep putting love and effort into mini biking. Cops are always on us even when we're creeping to a spot we can ride. We won't give up. Thank you guys for such awesome content. I think it would be awesome to collab with you guys and make a vid of you guys with us amateurs and see what we could build together in a day. There's about 4 of us that would love it. Thanks again!

@froggersgarage5127 2 года назад

Make that 5 count me in @Sheldon Logan and I have built a 2stroke wheelbarrow capable of 25 mph I have videos on my channel

@ST3W101 Год назад

@@froggersgarage5127 im gonna have to check that wheelbarrow out lol. sounds interesting

@EJ-74 2 года назад

Ole Charlie's has turned out to be a awesome addition to C & C Love the build guys 👍✌️

@leifhietala8074 2 года назад

Charles is rapidly becoming a source of wisdom worth remembering. "It's only bad if you look at it," man, that's what I keep telling people. If you go looking for trouble and find it, whose fault is that?

@johnreis1872 2 года назад

Don’t leave me alone, Charles is hilarious! I can’t wait to see the next episode of this build, it has so much potential!!

@jesseshelby4383 2 года назад

Getting the power hooked up in the shop is rad! So much room for activities 🤣😂

@paulheart5178 2 года назад

One of the coolest things I see both John and Charles doing is talking to Issac when they have a problem. Both of them are very good at what they do but have no issues at all asking for suggestions from Issac who has been doing this most likely since his childhood. It takes a big man to ask for help and an even bigger one to do so with hundreds of thousands of people seeing it online. The dynamic you guys have is just awesome. Love the friendship and respect you all have for each other. It's one of the top reasons I watch you guys. Cheers, hope you all had a great Christmas and have a great New Year as well.

@mattpoynton5384 2 года назад

Have been watching for a couple years now love the content and think Charles is a great addition to the team

@TOO_RAW 2 года назад

I grew up with Charles he's a good dude no doubt.

@tslim250 2 года назад

damnit charles, how can you be so mechanically inclined yet so damn clumsy lmfao. good job kid, its good to see more folks learning the hobby

@2koolchris291 2 года назад

I am so excited for all the new videos that are in progress. The car and karts are cool and stuff is happening and I can’t wait for the next update

@MoondyneJoe 2 года назад

Ah Charles, you make the best comic relief ever, please never change! I hope you and your better half are getting plenty of sleep with your new addition to your family. I hope you all have a wonderful Xmas and a happy new year with 2022 being bug free Tony from Western Australia 🇦🇺

@jacobbreazeale1816 2 года назад

Thanks for a great year of quality entertainment! You guys are awesome!

@ianellithorpe5918 2 года назад

Cars and cameras my ode to you. Thank you so much for all that you have done, watching your dreams grow has been oh so much fun. 'tis the season for counting our blessings, just like the projects you are continually caressing. Thank you so much for all that you do, it means more to me than these words can construe. As I sit with family and I hope you do too, I want you to know I will keep watching you!

@JMassengill 2 года назад

I think this is the best thing you all have built. a totally nice design. to send or not to send, that is Ike's question.

@paulheart5178 2 года назад

Although I have absolutely nothing to do with your new shop at all, I am ridiculously happy and excited for all of you to see the power turned on in the new shop. It's strange for me to feel this good about it when it has nothing to do with myself at all lol. Well done guys.

@paulheart5178 2 года назад

@@jiena____6464 Really? You have to spam this channel with this bullshit?

@henningniemeyer6968 2 года назад

Hey guys you're doing great stuff all the years! We built a 5speed shifter years ago, and we mounted the clutch level right on the shifts tick, so you can basically shift up and down by using only you right hand, which makes it waaaay easy to go fast and control your yard dart in fast corners aaaand you don't have to switch with your feet! Just an idea, maybe it will work out for you as well! KEEP UP YOUR GREAT WORK!!!!

@srharris88 2 года назад

I know they have done that in the past. On the really fast karts they put in a foot pedal clutch and paddle shifters on the wheel so they can keep both hands on the wheel while shifting gears. Might be good on this project though.

@leadvalleychopshop8506 2 года назад

Great job guys, can’t wait to finish our projects. You guys are great motivators

@Noah-qs3rq 2 года назад

Those catterpillers are called woolly bears, or "Woolly Boogers" as we know them here in KY. They turn into a beautiful tiger moth. These guys are completely harmless and are fun to fart around with cause they bundle up into a ball, their hair is course, makin them able to roll around in your hand. These guys are just your normal caterpillars but the color bands are connected to a legend that the more black they have on them the worst the winter, more brown is lighter winter. Great job on the build guys!

@ahw777 2 года назад

It would probably do well with a spring tensioner on the bottom middle of the long chain to prevent the chain from coming off.

@nugget8563 2 года назад

Took the words outta my mouth

@anthonykrusel349 2 года назад

Yep! Top of the chain will be tight while exerting torque to rear; thereby dumping loose chain to underside of front pulley. Definitely put tensioner on bottom, please.

@yeliab814 2 года назад

Tensioner should be pivoting and squeeze top AND bottom together. It will ride to the position it needs to depending on whether torque is being applied as well as coming off the gas in which case the bottom will tighten up and move the slack to the top. the tensioner needs to accommodate both

@MrVein5.0 2 года назад

yeah man, i would try making the chain a little longer actually and really tie it in with a springloaded tensioner from the underside

@rncboy2 2 года назад

Charles "You can't leave me alone" 🤣🤣🤣

@gachajacky1926 2 года назад

I dont get on you tube much , but when I do its always CARS AND CAMARAS. Cheers .

@richardsteele6776 2 года назад

Epic Charles quote: “ it’s only bad if you look at it “.

@diernosaj 2 года назад

"Hotter than a Stihl chainsaw in a east Tennessee pawn shop." LOLOL

@DerrickSmall 2 года назад

I'm just absolutely losing it over Charles's chainsaw commentary at @11:09... Thanks for the laugh, I'm enjoying this build!

@j.w.3345 2 года назад

Thanks for a great year guys! Can’t wait to see you in the new shop!

@sqwisshy2004 2 года назад

Currently building a barstool cart with a chainsaw motor and would love to see you guys build one too!

@billdont2458 2 года назад

Dang! Can't wait to see the hot laps!

@jamessmith3741 2 года назад

There needs to be a CnC shirt made with Charles and his “thumbs up” he does.

@hunterchartrand6646 2 года назад

i must say, you guys have come a looong way since your days at your parent's house, and its only getting better and better, keep up the great content!

@teenlaqueepha 2 года назад

This build is my favorite one you guys have done .... and I've been watching you guys since the beginning!! YESSSS

@ThatOtherGuyThere 2 года назад

What amazes me is just how far you guys have come from the crappy shed to stealing your parents garage to your new bad shed to a new shop im happy to see what comes next

@ianproctor4595 2 года назад

Charles is a great addition to the cars and camera team..

@Wolfpackracing8 2 года назад

Love every build, keep going on guys

@tenflat2009 2 года назад

I run into the chain loosening issue all the time with overhead door motors. What you need, if there's shaft room, is what's called a spreader bar. Essentially it's two bearings with an adjustable bar between them. What this effectively does is to keep your two sprockets an equal and even distance apart. The only way to generate chain slop after that is by stretching the chain under load. And believe me, there's WAY more load on an overhead door motors than you could ever generate with your go kart.

@fskartingco.1055 2 года назад

Merry Christmas guys, thanks for an amazing year of videos! you guys should do a video with nothing but highlights from the year. nice job fellas se you next year!

@danf4616 2 года назад

Old Kart racers (builders) never die - they just lose their master link!

@sakaspuds 2 года назад

your chain tensioner is on the tight side of the chain, should be on the slack side (after the motor)

@TheNickyboy35 2 года назад

Thanks for entertaining us over the last year guys it's been great. Hope y'all have a merry Christmas and all the best for the new year 👍🎅🤶⛄

@brncphllps 2 года назад

I took a siesta from your channel for a while and I am binging on it again. Charles is a great addition! He is witty and has the funniest saying. Love all of the content your putting out.

@panfriedmarmot 2 года назад

Charles may be "The Goofy One" but his knowledge and skill is always impressive.

@ervingoertzen7233 2 года назад

Awesome job on this kart John ! I have been following you an d Ike since you built your first kart, and started working on your C10. Can’t hardly wait to see your video on it

@foreverhungry84 2 года назад

when the chassis flexes it changes the chain tension, that's the trouble with such a long chain drive

@daylrice7766 2 года назад

Thes video's are alway's very good and a joy to watch. In my opinion Charles is a perfect addition to your channel he seems very capable in his abilities to perform welding, mechanical and electrical and a great sense of what it takes to work well with others. Even when Ike is acting like a real jerk it just flows off Charles like water off a ducks back. Great channel even as a 68 year old geaser brings back so many memories of building the first go cart and mini bike at age 12 to hundreds of projects in my own Welding and Repair shop for 26 years in a small farming community in S.D enjoyed every minute of so many projects. Thanks to you for many hrs of trial and error until all the problems finally comes too, hopefully that satisfying moment when it's working perfect. Every one who works in fabrication or repairs as a mechanic, welder, electrician knows that special feeling when your mind and your hands create some thing useful or fun and l projects. Now every body can enjoy your work and learn a million things from watching every thing on computers and wireless cell phones. To possibly over a million video's called diy videos on RU-vid truly amazing where we have come from to where we are today.

@hammerT2997 2 года назад

Ike a jerk?? Ike is the coolest cat on the channel. The legit backbone of the channel.

@TheDavejmcknight 2 года назад

Love the new shop! Good for you folks.

@mikeh3851 2 года назад

Merry Christmas, guys. Looking forward to some great content, as always, in the new year.

@daviousmaximus6446 2 года назад

Merry Christmas lads, thanks so much for the great entertainment. Best wishes for next year. Onward and upward!

@grimsbyrider3976 2 года назад

Thank for keeping us entertained this year in the UK . Merry Christmas and a happy new year.

@isomer13 2 года назад

Great build. Good ideas too. I'm thinking you need a "pinching" type chain tensioner. Spring-loaded - so no matter what the forces are - it keeps the chain tension taut. Just a thought. I'm pretty sure you can come up with a "twin" tensioner. Also, I forget which build it was, but you tried rubber engine mounts, and they flexed a bit too much. You can get sheet neoprene rubber in squares or strips, etc.(12"x12" square is about 20 bucks on E-Bay.) Just go for a high shore hardness value. Buna-M is the type. I'm thinking somewhere in the 70-90 shore range. It can be had in thicknesses from 1/16" up to an inch, or possibly more, I reckon. Thanks guys.

@jogden6632 2 года назад

"Hotter than a chainsaw in an east Tennessee pawn shop!" Hahaha🤣🤣🤣🤣

@keithmason9342 2 года назад

Hey guys, Merry Christmas and Happy New Year. Thanks for all the wonderful builds. That shifter cart is awesome. Glad to see the power is on at the new shop. Can't wait to see you working on the Poop de Ville Rattletrak. Hope Santa brings Charles some welding gloves and a welding jacket. Hope Ike gets a kevlar racing suit to keep him intact on his test drives. And John might need a pair of glasses, but it'll be fine. Love your builds and it keeps me feeling young watching your videos. Take care and looking forward to a new year of epic builds. Thanks for everything.

@frankw8315 2 года назад

Loving the content atm guys, love to see more mini bike stuff too. Keep up the great work

@nashguy207 2 года назад

Love the shifter Kart! Merry Christmas!!

@danielsells76 2 года назад

Love all the videos you all have put out this year and wishing all of you a Merry Christmas. I looking forward to see how you setup the new shop and may the new year bring some interesting builds and lots of great videos, thanks for a wonderful year of all the videos and builds you all put out !!

@Krackerxoxo 2 года назад

Merry Christmas Guys, it was a fun year hanging out with you.

@damien2006 2 года назад

Your channel and everything has came along way congrats

@oldman9161 2 года назад

keep up the great work guys I find myself on pins and needles every Monday and Wednesday see ya next year....

@pollyg562 2 года назад

ive never worked on a engine in my life yet when the boys have any problems i identify it as quick as the boys just watching their episodes over and over i know exactly whats wrong i bet it doesn't transfer to the real world though

@S_Garrett 2 года назад

Merry Christmas and Happy new year to the Cars and Camera Crew John, Isaac and Charles. Thank you from Tennessee.....

@bryanteel3046 2 года назад

One of the best projects you guy ever done!!!

@derekmast142 2 года назад

Im so ready to see this thing rip !

@shanehaws3828 2 года назад

John or Isaac you both need to look into how Polaris did there chain tensioners on their late 80s and early 90s 250 and 350 4x4s for their jackshafts

@samilbhogalgodisgreat6927 2 года назад

Really inspiring and very helpful on building stuff or putting stuff together keep up the good work

@henryescat1104 2 года назад

Congrats on a Million! And Merry Christmas Y'all!

@DaxtonAnderson 2 года назад

19:38 John calling Ike dad on the phone call was so wholesome I almost shed a tear tbh

@rizole31 2 года назад

Always sweet builds such a great team and family you guys are building stay safe Happy Holidays and too all viewer's as well.

@richb313 2 года назад

Looking good guys. Once you get that chain tensioner figured out it will be more reliable and able to be evaluated properly. Merry Christmas and Happy New Year

@GodschildinNC 2 года назад

It was a good year with plenty of good builds! Can not wait to see the shop set up and all the projects that will come out of it. Can we see more of the bronco?

@brettcinder258 Год назад

These are great videos. You guys are living the dream man having fun. We've done the same when we were young. Good to see it once again. 🇺🇸

@jameshedrick6839 2 года назад

Thanks for a year of great videos. Have a merry Christmas and a happy New Year

@pcservice709 2 года назад

John, Isaac, Charles, you boys do a fantastic job. I can’t wait to see this build progress. This machine looks like an animal. Merry Christmas guys, from St. John’s Newfoundland on the East Coast of Canada

@doctorromex7804 2 года назад

Spring loaded chain tentioning is most likely required with that long span chain set up. I also cant help but wonder about sprocket to sprocket alignment changing when things get flexed over uneven terrain with the long distance between the suspention attachment point way forward in the cart and so far away from the axle centerline.

@leonhart2452 2 года назад

I agree about the chain tensioner is to close to the front. Moving it about half way back and spring loaded too. The spring loading will maintain the right tension through out the travel of the rear axle.

@xtremelimits640 2 года назад

Thanks guys for a great year. Looking forward to see more awesome videos next year. You guys stay safe and have a Merry Christmas and Happy New Year.

@3rdGenCoyota 2 года назад

Thanks for the great year of awesome content. Have a Merry Christmas and a Happy New Year!

@tkskagen 2 года назад

Having a Welding Guard/Curtin would be nice to have when using the CNC Welding Table!

@melissahenry2572 2 года назад

Merry Christmas and happy new year guys. Totally enjoy your show. Keep it up ☺️

@jasonjulian1 2 года назад

If you guys plan on running this engine at higher rpm for a while, more than a couple minutes at a time, get an oil catch can on there. The ZS engine likes to spew oil out the crankcase breather vent under those conditions. I also think your idle is still a touch low, set to 2000rpm when warm. Great build and can't wait to see its laptime!

@everymoto2561 2 года назад

Spring loaded tensioner for the chain. When the rear shocks compress you get the slack in the chain. Spring loaded tensioner will counteract that. Merry Christmas guys!

@lawrenwimberly7311 2 года назад

Charles is the type to turn up the radio so he can't hear the funny noise... because he knows that if you INVESTIGATE the FUNNY NOISE, it inevitably leads to an OILY MESS.

@sammylisasmith2104 2 года назад

Merry Christmas guys thanks for the videos

@michaelhernandez2106 2 года назад

You guys are 3 amigos lol love the content you give us keep up the great work happy holidays

@Hammerjockeyrepair 2 года назад

Congrats on getting power in the shop finally!!! Now that ya got some power, the first 2 tools you need to buy and DONT SKIMP!! Spend the extra few dollars to buy a QUINCY compressor! You wont regret it between how quiet and reliable they are. The second tool you NEED to get for your shop is a motorcycle lift with the side extensions!! Again, dont skimp, spend the few extra hundred bucks and get a real one from handy air lift brand! Keep up the great work guys

@FarmerFpv 2 года назад

I look forward to the full rip. Merry Christmas & Happy New Years John, Ike, & Charles.

@ariboni73 2 года назад

Charles makes me crack up😂 love that guy

@buckykattguitar 2 года назад

My new favorite saying "it's only bad if you look at it"

@jasonpetrich4141 2 года назад

So to fix that long chain slap!!! it needs a roller on the bottom, like an atv swing arm!! and a semi long guide just as wide as the chain, with a slim piece of rubber to help it ride smooth.

@tylerthomas7719 2 года назад

Hey guys i absolutely love your builds.yall are so inspiring to me and i have all this extra knowledge of small motors now because you you guys.id like to see yall do a go kart out of a shopping kart.bet yall could do it tho.and keep up the amazing work