Overview: Detachable Magazine Systems 

Don, this is a GREAT series! It's great to get such detailed yet broad-ranging knowledge on stock systems, and modification options. Keep 'em coming and thanks, Rob

Hey Don thanks! Did business with you in the past and will be again! It is great that you are doing these vids and you just put out the facts and enable an informed choice.

Thank you for the very informative video.

Love your products 👍🏿👏🏿👏🏿👏🏿👏🏿👏🏿

thanks.... learned a lot

great info!!!!

I have a model seven 17 Remington, just ordered a hs precision conversion kit. I hope it'll fit and wont be any problems

Hey stocky, i would like to ask if the HS PRECISION MAG WELL would fit to a hunter 700 stock?

would the m5 system drop into a bell and Carlson a5 metalist or would you need to do some smithing first?

The M5 Stealth DBM from Stocky's does not fit Model 70 HS Precision stocks in 300wsm. The front aluminum stud pushes the front metal out 0.14" and will need to be machined down to be flush in the front. And can not be taken down to the aluminium bed bc then the magazine would interfere with the bolt operation and the bolt won't close unless you push the magazine down from inside the chamber. That also happens bc the M5 308 magazine has about 1/4" of vertical travel if you push on the bottom of the magazine. I also had to remove the fiberglass in the middle like Don mentioned in this video. And the magazine rattles around so loud with the 308 AICS mag from Stocky's. Ridiculously loud!

I have a Bell and Carlson 2095 Remington 700BDL short action (.308), Will the M4 or M5 "drop in" in to my Rem 700 Target Tactical ?

My 700 Police in 338 Lapua came from the factory with a AICS drop out mag Now I'll like to get the same setup for my 308

Is there an option for my wood stocked 700 CDL 30-06? Thanks for all the information

I have a Remington 700 ADL long action in .270 and have been wanting to find a way to go to a detachable magazine. Would that be possible? I'm thinking a stock change but which of the products would work for my caliber if any?

I didn't see where anyone else commented on this but I may have missed it. But you mentioned the M24 was long action because they are now converting them too 300 win mags. I spoke with a guy who was around back when they first got the rifles. They were originally chambered for 30-06. The army then realized they didn't have the stock pile of 30-06 they thought they had. If you've ever served in the army the fact that they made that mistake is not surprising at all. Well some of those rifles got converted to 300 win mag. Mostly special forces. The rest were chambered for 308. That's why they're using 308 in long action rifles. Not because they planned on converting to 300 win mag in the future as it sounds like in this video. Not that it's a big deal I'm just a bit of a history buff and thought you might find that interesting.

What magazines do these take? AICS Magpul?

Sure, here's the rule: Standard 700 BDL stock - M4 DM System for a drop-in -or- fit the H-S Precision DM H-S Precision stock - Use the H-S Precision DM McMillan or Manners Tactical Stocks - M5 Stealth DM If you want to use (and have the wide availability of) the AICS magazines like the military, get the M5 Stealth and machine YOUR stock or get one from us pre-fit. The drawback of the M5 Stealth is that it will not drop into a standard BDL stock without extensive machining on a mill.

I have a Remington 700 DM that was factory made can I put in a Magpul triggerguard assembly and magazine or a legacy sports triggerguard/magazine assembly in my rifle?

I have a Mausur 8mm K98 converted to.243 with a Houge over molded stock, that I have feeding problems. Can your magazine conversion be adapted to this configuration?

Hi There , will the m4 and m24 fit into a bell and carlson m40 long action remington shock?

I have the 700 sps aac sd chillos green stock, will the his precision fit right in? Is that one of the examples you just used In this video?

would the magazine conversion kits made for the remington 700 work with the remington 783? Thanks

Do you have any suggestions for a .223 VLS? with laminated stock. I would appreciate any suggestion..

(we'll have .223 mags for the M4 very soon.)

could you make a magwell that uses the SR25 mags ? - way easier to have same mag all through out company

Hi Don. I've got a huge question. I have a Winchester Model 70 in 270 Win that has the blind Magazine. What would I need to convert it over to either a Hinged floor plate style or a DBM type. I know i'll need a new stock. But I can't seem to get a straight answer from anyone on this. Your help would be greatly appreciated.

Do they have one for savage 110 hinge floor plate short action 300wsm

Sure, with a new stock. I wouldn't recommend machining the Remington plastic stocks for it, too much material to remove. Go with the M4 for use in the factory stock.

Do you have a DBM solution for a Marlin XL7? Boyd's said they don't.

Will the m5 work with a VTR?

I have a Winchester 70 XTR .223 Sporter Varmint .Do you have any suggestions

Does this work with AICS magazines?

Need 1 for a 270 Ruger American.

May I ask... would the m5 be a simple bolt in replacement on the 700 ss5-R models? Thanks for the video.

I have a Remington model 700 BDL 30/06 , with all the different types what detachable system can I use M4 or M5 and where do I get it ? It's been 6 year and I never got an answer to this question so that tells me not to buy anything from this guy.

the extended mag well also gives you a little more reliability when shooting from barricade. if you were to slam your magazine up against a sand bag or wall youre now prone to feed isues because youll cant your magazine. an extended mag well will protect you from from canting your magazine while pressing your rifle up against a baricade.

m1a Magazines?

You said slam in a fresh clip, Lol

bof bof

Ummm He's a Real Man..I'd willingly be His obedient servant/slave..