P0741: TCC SOLENOID PERFORMANCE OR STUCK OFF 4L60E (PART 1) 

If you guys are having solenoid problems inside the transmission on the 3800 and couldn't remove the side pan due to rusted out subframe or something else what I did was cut the brown wire on the transmission harness was about to junk the car but now that I cut it the torque converter is working again and shifting every gear I put 400 miles in 3 days no problem at all

So did you replace valve body or the harness with the solenoid?

Good explanation I have a 2001 maxima , 203k miles Check engine light p0744 Shifting badly I did a ATF drain and fill adding Lucus Old fluid was black/brown no metal shavings or metallic tint, no burnt smell either. After the atf service. it was a lot better, maybe 65% better. I also cleared the code. 70 miles later it came back. At 330 miles it was 80% better now at 600+miles it’s say about 90% better. I have a feeling the TCC solenoid was dirty from the old fluid. If it does not get better soon. It may mean replacing shift solenoids Transmission : RE4F04A Nissan Part No.: 31940-80X25 SOLENOID REPAIR KIT - CONTROL VALVE About. $77-120 part

if only torque pro app showed me those trans values..

Rebuilt transmission on a 2013 tahoe; didn't even have it back a full 24hrs. Shifting late, rpms idling high but seem like it don't want to catch speed; Transmission fluid good, torque converter new. Mechanic said Transmission didn't need to be reprogrammed. Can anyone tell me what it could be; also took to the parts store put on machine and it read a code P0741 and C0899-00... can someone help me out with this ik it could be a list of things

I'm watching

Hi my friend a curiosity I have the same gearbox mounted on the opel insignia and it makes me in neutral from 3 to 4 gear, with the diagnosis it gives me error P0741 and P0734 what happened in your opinion?

Did you verify solenoid CIRCUIT function? Or did you just disturb the electrical circuit?

what scanner were you using

Hi. How to fix the problem in the video? I have the same problem.

Great Video and info.. Question should you reset the TAPS Function after replacing all the Shfit Solenoids and Pressure Valve Switch on 08 Silverado? I was getting same code p0741 but now it shifts smooth but didn't reset codes after replacing parts.

I had this code but I was wondering by turning off the code will it come back on so I went for a ride it didn’t come back on the next day I took it for a ride again and see if it comes back on and it didn’t so have to drive it on a highway and do 70 to see but I haven’t try it yet I have a feeling you are right I think it slips but I wait and see hope and pray it doesn’t come back on 🤣🤣🤣🤣🤣

So what was it was it solenoid,valve body or just cleared the code with your computer 🤷🏻‍♂️

What was the actual repair performed to fix it?

I have a p0746 pressure solenoid, stuck off. What solenoid would it be?

I am having this issue on my 2005 gmc envoy 5.3L with the 4l60e trans do do you believe dropping the pan and changing the solenoid or cleaning the old one would fix it. When I hit 40 it just slips

My truck is doing that rebuilt it 4months ago converter is new

Great job

Anyone knows how much fixing a P0471 code would cost on a 2011 Mercedes E350 4Matic sedan ?

I have the same code 2010 Silverado, so I clean the metal off the tcc valve?

East C-Town!

Go Browns

I have the same scanner but was afraid to start the vehicle with it set up. Is there any way to damage the computer with vehicle running?

I just received this code on my 05 Toyota Corolla. How bad is it to drive with the code? It drives completely fine and I plan to fix it soon but it’s my only mean of transportation.

I have the same code 01 gmc sierra 4l60E. What happens if I keep driving it slipping for several more months?

I had my transmission rebuild completely and 3 days later I got po 700 and po 0741 any suggestions

EXELENTEVIDEO OTRA COSA DONDE ME PUEDO SURTIR LAS REFACCIONES DE UNA CAJA IGUAL

Is it unusual for the P0741 code to come and go? My car shows no signs of shifting problems or gas mileage issues but I get the check Engine light after about 2 hours of driving. Once on, it stays on until an adequate cool down period occurs, or the next day, then it’s off again?

What city do you live in ?wheres your shop?

Hey man, I had that code pop up on my son's 06 Saab 9-3 2.8t. V6. I removed the valve body and fluid which were terribly dirty. Black fluid. Tested each solenoid, and got the correct 6.5 ohm reading. Cleaned and rebuilt the VB and reinstalled it. I correctly used 12 quarts to flush out old fluid until all fluid was fresh. No more p0741 code, but car still won't drive. Do you think it needs a new torque converter? Thanks

Do you have any videos on diagnosing torque converter shutter

thanks

My torque converter was physically shaking the car but no codes professionally replaced it now every torque converter code possible replaced all solenoids not fixed until I bought a toyota lol never ever buy American