Part 16: 🔧 How-to 🚗 build your E30 Differential From Start To Finish! A complete guide!

Подписаться 18 тыс.

Просмотров 2,1 тыс.

50% 1

If you're interested in having me rebuild your differential, click here to find out how!
garageaholic.build/product/18...
Today, we change out all bearings and races, seals, rebuild the clutch pack with a 3-clutch set, zinc coat all parts, polish, paint, gear swap, and install a semi-polished aluminum Z3M differential cover.
The 3 clutch kit: racingdiffs.com/products/bmw-...
Garagistic 2nd ear kit: www.garagistic.com/products/e...
The bearings/Seals Kit: racingdiffs.com/products/bmw-...
E30 Pinion/Carrier Shim Kit: racingdiffs.com/products/bmw-...
Pinion Clamp P/N: 33121744368
This is essentially a BMW E30 Enthusiasts dream differential!
Please consider subscribing!!
ru-vid.com?...
Take a look at my growing IG and FB!
/ garageaholic
/ garageaholic
For more information about what I do and who I am, visit:
www.garageaholic.build
E30 & E36 N54 Swap Guides available for purchase!
garageaholic.build/product-ca...

Авто/Мото

Опубликовано:

27 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@bishopuu07 3 месяца назад

Thank you

@spencermaiers8322 3 месяца назад

Obviously a bmw diff master. Love it. Thanks for the education, very impressive and very nice work and explanation. I bet you've done 3 dozen or more.

@kujtek 3 месяца назад

i believe lsd should be maintained with 75w140 not 75w90, check it before clutches will be burned

@spencermaiers8322 3 месяца назад

Usually I fill mine with Wesson. Available at most maor food retailers.

@Czechmate_e30 3 месяца назад

YES! Great video. Always loved your stuff.

@anilec333 Месяц назад

Easy to understand! I am gonna order the tools and kits! Since I replace new cv(expensive gkn) and the Z3 lsd ( the diff seems really need to rebuild! Thank you sir!

@sats7819 3 месяца назад

Legend

@2ndProtects1st 3 месяца назад

Nice always good work!!

@Nico_335i_DCT 3 месяца назад

Great rebuild, Frank. Very interesting. Thanks for sharing and have a good one. Regards Nico.

@philchris5003 3 месяца назад

Hi, backlash isn't too short ?

@galantecdn09 6 дней назад

hi, I have a diesel e30 with an e46 M57D30 engine and I have a problem, the car only gives 74 miles when it was supposed to give at least 149 miles, I was told that the problem was the differential, what can I do to change this without having to apply the e46 differential? Can I build a differential with the E30 body but with the E46 interior like in this video?

@polloloci21 Месяц назад

Did you add a gasket to the diff cover? Looks like you only used permeated (or something similar). Thanks

@Bob-Sacamano 2 месяца назад

Thanks for the video. I've done a bunch of Dana, GM, Ford diffs before so I'm pretty familiar with the rebuild and regear process but this one is strange to me so I have a few questions. Are there no shims for the pinion side? If not, how do you adjust pinion depth to get a proper gear pattern? Also the backlash seems very tight. Most diffs I've built are typically in the range of 0.006-0.010". What is the recommended range for a BMW 188mm diff? Thanks.