PCB Vertical Plugin 

The Precision is incredible

It’s like a sewing machine for capacitors

I’d love to see closeup of the mechanism how the legs are guided through the holes.

I wasn’t that impressed with the precision to get into the holes however the bottom actually cuts and solders the leads. Now that is impressive.

My first day work, I visited this department in my factory. Panasert machine from Panasonic in 1989.

I didn't know capacitors were placed with sewing machines. You learn something new every day.

Я чтобы поставить 1 конденсатор рассматриваю полярность, и ещё раз убеждаюсь где плюс где минус. Потом просовуваю ножки, ещё раз проверю полярность. Потом запаиваю и ещё раз рассматриваю правильность установки, потом дальше 😂

Pick and place machines are amazing. They’re absolutely ubiquitous in electronics manufacturing, and without them, things would cost so much more than they do.

Какие же люди умные!!!Ведь это всё нужно придумать,сделать оборудование и внедрить все это в дело. Очень большой труд.

That accuracy 😮

那麼精準！那些電容腳不能有歪掉的狀況！電子業的技術越來越強！

Back in the day the TDK VC-7C Radial Inserter was the able to keep up with production at Rockford Fosgate Tempe, AZ

It's called a Pick and Place Machine. Next step would probably be placing the rest of the thru-hole parts. Then its off to wave or selective solder. You should see a machine that does surface mount parts too. Amazing!

I've seen videos of pick-and-place for surface mount devices, but this is even more impressive.

As an audio engineer, I really love this plugin!

That loop is almost flawless, good work my guy

Ahh the days of through hole! 🕳️ miss working with it! Smt is quick. But the accuracy of the through hole is excellent!

It would take a human being 30 minutes to do this job as reliably.

I was a maintenance technician on one of these machines (Universal Radial88 Inserter) and let me tell you…when the calibration got off you’d spend the next several days getting it back into alignment. Everything had to be perfect from the rear of the machine where the parts are loaded onto the conveyor to the head that grabs the leads and places it in the board and clips/crimps on the bottom. An incredible mechanical machine, with so many parts that could and did wear. But when it worked smoothly it was amazing to watch.

They are Electrolytic Capacitors. They can only be put in one way….one leg is the anode and the other is the cathode. The machine inserted them all in the correct orientation.

Швейная машинка для радиолюбителей 😂👍

Netflix: Are you still watching? Someone's daughter:

Напомнило старый анекдот: Купили как-то суровым сибирским лесорубам японскую бензопилу. Собрались в кружок лесорубы, решили ее испытать. Завели ее, подсунули ей деревце. «Вжик» - сказала японская пила. «У, бля...» - сказали лесорубы. Подсунули ей деревце потолще. «Вж-ж-жик!» - сказала пила. «Ух, бля!» - сказали лесорубы. Подсунули ей толстенный кедр. «ВЖ-Ж-Ж-Ж-Ж-Ж-Ж-ЖИК!!!» - сказала пила. «Ух ты, бля!!» - сказали лесорубы. Подсунули ей железный лом. «КРЯК!» - сказала пила. «Ага, бля!!!» - укоризненно сказали суровые сибирские лесорубы! И ушли рубить лес топорами…

This is called a RAD (radial instertion) machine, made by Universal Instruments Inc. Binghamton, NY. I used to maintain these, along with SEQ (axial sequencer), and VCD (variable center distance). If well maintained can work 24hrs. I still have the full set of drawing, operating and programming litrature.

Как люди представляют ремонтника ноутбуков когда сдают его на диагностику

The developer is a genius

อยากมีสักเเผงวงจรนึงจริงๆเพราะดูมีความเเม่นยำจริงๆผู้คิดค้น เก่งมากครับ หากอายุสัก7ขวบ จะพยามยามตั้งใจเรียน เเละไปทางที่ถูกต้องเพราะโลกของเทคโนโลยี เปนช่องทาง รายได้ดีมาก ตอนนี้คงไม่ทันละครับ..คงต้องไปพบยมบาลก่อน ที่จะเห็นอนาคต ที่มั่นคง สุดยอดครับ...❤❤❤❤❤

The fascination about machines like this is the total lack of hesitation. There is no what if's or anything, just start going at a 110%.

A "Sewing machine" for PCBs.. nice!! ❤

The motors that can make move this PCB are amazing

This is beautiful... Ive been watching for 10 minutes now. Why is it so calming?

Real incredible precision, lol I messing with my 3d printer like 0.1mm adjusting over two months. I'm impressed, good engineers

Пи..ц как быстро, интересно как он контролирует вошло или нет

மனிதனின் மூளை அபார வளர்ச்சி உடையது, 🙄🙄🙄🙄🙄

What a precision. Maths at it's peak

What's crazy is while this is really fast, when you think about the scale of pcb manufacturing this is actually a really slow process!

Точность и скорость невероятные

Чего, только не придумают, лишь бы не работать!

Respect to the worker moving the pcb gast enough to keep up

Manufacturing is underrated

Прям как швейная машинка😏

These PAP machines are crazy good. Well done

Ever since I watched Venjent, my shorts is flooded with industrial sounds good for sampling.

Nice machine! Are components adhered as well? Wave soldered?

Saya pernah menjadi operator mesin RH seperti ini pada tahun 1998 - 2005 Di PT Katolec Indonesia (Subcont dari produk Sonny, Panasonic, Epson, Aiwa, Yamaha, Sanyo)

😮 as an engineer I think I need one of those. I've been stressing myself fixing things manually

I hope someone has jacked up the audio here because it sounds like they're stamping auto parts or something.

This remember me 20 years ago. I used to love to work with these machines.

Really surprising to see this running so smoothly, generally when we will do it manually. It will be quite difficult to pass the capacitor terminal through the hole as most of the time it will be bend will not be able to pass thru

Timing and the precision was awesome 👍🏻

Can see some horizontal plug in?

- The white tube to the cut and clinch is the wrong part. It should be a bright yellow-green, and properly clamped to the cut n clich unit to create a good vacuum, otherwise the leg trimmings will build build up inside the cut n click caussing it to fail and even brake a knife. - The 2 contact wires should be black spiral wires, not those staight white wires. Whoever is in charge of maintaining the RAD should do a better job.

I could watch this all day

I have worked in several circuit board assembly companies and I have seen these and many other types of these machines perform, and all I can say is this is either an old machine, it's running on low speed or it's just a slow machine. Most of the machines I worked with operated at such high speed, that board would only take 2-3 seconds to be done

I will show this video to our IT guys in the company, for motivation 😂

Fantástica, coloca los componentes por arriba, mientras la otra herramienta solda por abajo de la placa los elementos a una velocidad increíble.

座標が完璧 位置精度が高いのは凄いね　早いし

If you close your eyes and just listen, it sounds like a lego set coming together.

The precision on this is incredible! Anyone that's worked with pick and place machines will know how unreliable they can be.

PCB: "Please be gentle" Machine: *smirks*

Oh man I've got PTSD from reloading a similar machine making video cards in the 90s.

Help its so perfect i can't stop watching

이런 자동화 시스템 설계자들 참~~대단해~~!!

now give the board a cigarette

That was some fast installations of a LOT of capacitors.... would be a shame if they were.... _plagued..._ Seriously though, thats one hell of an amazing machine.

No solo inserta los capacitores con suprema habilidad y exactitud, también los suelda al mismo tiempo.

Recuerdo cuando trabajé para Panasonic y reparaba, este tipo de máquinas , las que ponen resistencias son más rápidas 😉👌

Accuracy of machine 📈 Knowledge of machine 📉😌👍

Берёшь и суёшь. Берёшь и суёшь) 😂 Он хоть успевает припаивать? 😮🧐

I bought a TV and it comes with all of those functions 😄

But remember that increasing speed, accuracy, minimizing defects and replacing 2-3 employee salaries with power from an outlet - is not a reason not to continue to increase the price of the product, as before)

I've repaired these. Fascinating tech!

Try siplace SP20 head on SX machine, with 180-190k components per hour and then we are talking business. My old HF 3-3 Siemens Siplace machine is 5 time faster with 4 pick and place modules in PA2 and 2, 12 peace colect and place modules in PA1.. This technology was mindblowing in 1999 🤓

"Switch to your other weapon. It's faster than reloading!"

this is how electronics should be recycled. a machine just like this that pulls everything back off the board.

The fact a human has to build the robot to build the computer to build the computer is fascinating

ingat waktu msh bujangan tahun 1990 kerjanya ngoperasikan mesin sejenis ini

For some reason, I was expecting this to lead into another Venjent remix.

Accuracy on top Notch !!

In addition to precision, the machine is very fast

Beautiful! Thank you for share.

Как? 🤔 Руками бывает сложно в эти дырочки попасть😁 а тут всё чётко. 👏

So that's what my neighbours are doing every night.

This machine doesn't need holes...it makes them using the component legs.

Bro is stitching a computer. 😂

gotta make these Machines into a Orchestra

Done by the machine and priced as hand made 👍🏻👍🏻👍🏻👍🏻

У нас на кэмзе до сих пор электродвигатели вручную наматывают 😂

Literally just did my entire life's work in less than 20 seconds

I want to learn how to make such a high precision automated machine, learning this thing is like a dream for an Indian tier-3 engineering college student😢.

Jesus christ. That thing moves with the precision and malice only a machine could master.

Kalo itu mesin buatan manusia , makaanusia sanggup melakukan hal tersebut , ( memasang elco secara manual bahkan dgn kecepatan melebihi mesin)

Que hermoso es lo exacto. Y los que lo hicieron posible.

Can I get $ now? I put in my 8 hours of watching this for malfunctions. I report it worked perfectly for all 8 hours on every board.

Meanwhile my soldering iron got hot enough by the end of the video lol

The sound is wonderful

So you are telling me the actuators and joints never fail and it remains always accurate

Were getting unemployed with this one 😊

Pov, you walk into an automaton factory by accident

Whenever i handle a motherboard or something like this i hold it with so much care like it will break with the slightest nudge. And bere is this machine just slapping components on like i throw ketchup on a burger except much more gracefully.