PEMP Android 11 Screen features for BMW 

Your suggestion is good, but because Apple's rules don't play videos by carplay. Probably for driving safety reasons. I suggest you to install RU-vid on PEMP to watch videos.

@@pempcar thank you for the reply. That makes a lot of sense from the safety point. I don’t need to be watching Fast and the Furious while on the I95 lol

@@michaelthompson7335 Nice

Dear, 2005 bmw 745 only has Android 10.0 version, the link below: www.amazon.com/dp/B0918G6TY4?ref=myi_title_dp&th=1

No, because ours only replaces the display of the original car. Do not replace the main engine of the original car. I think your subwoofer and amplifier should be connected to the back end of the original car, right?

Your question is great! Now let me answer your question: 1- Because to use CarPlay you have to connect the bluetooth of the PEMP, if you also connect the bluetooth of the original car. When a call comes, you use the steering wheel to answer the call. You can't hear the other person's voice. Unless you select the Bluetooth of the original car on the phone at this time; you can hear the other party's voice. But when you hang up the phone, the interface will stay on the OEM AUX interface; 2- If you don't connect the original car's bluetooth, but only connect the PEMP bluetooth, when answering the phone, you can use the answer button on the steering wheel, you can talk normally. After the call, it will stay on the CarPlay interface. 3- I will post a video to RU-vid tomorrow to express the above phenomenon in a video.

I just uploaded a video of connecting oem bluetooth, I hope to answer your questions. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-56vY6RIDg54.html

Thanks. But my perception is that the quality of the sound it’s better in the oem device, in any case I’ve noticed also that I have some breaks in the sound since I’ve installed the unit. Thanks

@@josemanuelperona8265 Yes, the OEM sound is the most perfect. Are you referring to the sound interruption, is it in carplay mode?

@@pempcar yes, from time to time I have some breaks. I am thinking to use the iPhone as hotspot and forget by now the zlink. At the end WAZE and Spotify will work perfect directly in the Android mode.

Your question is very good! 1- After you install the PEMP Screen, it will not affect the sound quality of the original car, because it retains the original car radio and power amplifier; only replace the OEM display; 2- The sound from Android must not be as good as that of the original car. That's because the AUX channel it takes enters the original car's power amplifier, and it uses analog audio, so it will be worse; 3- If you have a subwoofer, is it connected behind the original car amp? If it is, the Android sound will also come out of your subwoofer. 4- I can email me and we can discuss your solution together: service@pempcar.com

@@pempcar on 2 does it only use the aux channel through the Android auto when it's connected with the cable? Or would that be the same via Bluetooth also?

​@@Jarron-pq2cf 1. if you use the wired android auto. it don't need via bluetooth get the sound. 2. all the android sound must by the aux channel of the oem radio.

@@pempcar so I would not be able to listen to music through Bluetooth on an android? My stock Bluetooth only takes calls

@@Jarron-pq2cf No, of course you can listen to music via Android Bluetooth. And it sounds great!

Yes,you are right. it fit your 2012 f20 CIC (6PIN LVDS)system. Buy link: www.amazon.com/dp/B09L4TQ8G8?ref=myi_title_dp

Android 10 without the wried carplay and mirror limk function. another functions are the same.

@@pempcar thanks for answering. Is there any noticeable difference in boot up time or general performance because of better processor in Android 11?

@@AnindyaMahajan You're right, Android 11's processor is better when it comes to multitasking at the same time.

@@pempcar would appreciate if you could make a video comparing boot up time (and general performance) in SD 625 vs SD 662 screens. Will help buyers like me to make the right decision.

@@AnindyaMahajan This is a good idea, i will try. thanks

This is a good suggestion, but because Android 11 now only has configurations above 6+128G, the price is too high. We estimate that the sale will take place at a later date.

Dear, pls contact our after-sale team: service@pempcar.com, same time let's us know your order number.

Yes, this model doesn't sell Android 11 yet.

This is a professional vocabulary, I express my understanding: 1- When the device is completely powered off and restarted, it is called a cold boot. For example, after you leave a BMW car, it takes about 4 hours. It will power off the entertainment system completely. When you next get in the car and start the car. This is a cold start. 2- For PEMP products, when you lock the car for 5 minutes, the car will disconnect all power from PEMP. When you restart a PEMP product it is a cold boot.

@@pempcar right, but how long does a cold boot take?

@@rodmunch69 It takes less than 40 seconds for Android to start up, but the reversing camera can be activated within 3 seconds. The original car radio is not affected by this and will start at the original normal time.

@@pempcar thank you for the info.

@@rodmunch69 OK

Dear, you bmw 430i id6 is a nbt-evo system, following product fit your car. www.amazon.com/dp/B09KXYR4R5?ref=myi_title_dp

If you buy a PEMP Android screen, the OEM interface will also be displayed on the Android screen. It is not necessary to replace the OEM host. So the OEM radio function is used as before.

@@pempcar Can Radio play on a new Android interface?

@@TheNekry1 Here is the installation video for the Z4: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yn-8SL5V8Oo.html android screen without radio function, you should go back oem model play the radio.

Dear, now i will reply your question: 1. if you buy the PEMP was android 10 system, it don't support wired carplay, it only support wireless carplay. if you buy the PEMP was android 11 system, you need connect the USB DATA wire to the USB2 port . only USB2 support wired carplay. 2.The Google map is a online map, you need open the pemp's wifi, connect your phone's hotspot, Let's PEMP android connect the network. it will work well. if you still question, pls contace us: service@pempcar.com, Thanks

@@pempcar Thank you for your reply. 1. Ok so there are 2 USB cables coming from the Android unit. Only USB2 works with wired, correct? I will try that. 2. Is there a way to get GPS without wifi or hotspot? Thank you.

@@ItsTeceh You can get the gps by offline map. PEMP built-in igo maps, you can open it in the apps.

If your 2011 328 original car is a CIC product with display, the following products are suitable for your car. www.amazon.com/dp/B08YRM7RCT?ref=myi_title_dp

no, following video product fit your car: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QS3MOen-qkM.html

Are you using a wired or wireless Android auto? I can try switching to another mode.

@@pempcar i use Wireless.

How can we make a System Update

@@ToLoE. Please email your purchase order number and requirements to our after-sales service team: service@pempcar.com We will send software updates to you immediately.

@@pempcar Can we not update the device via the system updates setting? Or will I automatically receive future updates by email.

Following product can fit your 2013 f01: www.amazon.com/dp/B0918FH2PR?ref=myi_title_dp

​@@pempcar I wanted the android 11 version though for the F01 because its the most recent with improvements. Can i stream youtube on the Android 10 version?

@@bigwesley93 Both Android 10 and Android 11 support RU-vid installation and playback. Android 11 supports mirror link and wired Carplay, while Android 10 does not have these two functions.

I know Bluetooth is not available, you can try using the WIFI version of PS4 to connect to PEMP.

Sorry,The previous product hardware is MSM8953, which does not support Android 11.

@@pempcar Dang I just installed this. May return for Android 11 version.

@@aatechtv The functions of Android 11 and Android 10 are almost the same, with the addition of a wired Carplay and Mirror Link function.

@@pempcar thank you, but the anti glare and wireless mirror functions, along with maybe better Bluetooth sounds worth it. The Android 10 unit is nice, but afraid it will no longer get updates.

@@aatechtv I will respect your choice at any time!

Dear, you open the file manager in Apps, can you see the USB device, if you don't see it, there may be a problem with the USB format, please set the USB file to FAT32 format. If the above solutions cannot be resolved, please contact our after-sales team: service@pempcar.com We will respond quickly. thank you

@@pempcar The Android displays the list of all audio and video files, but no sound when they playing

​@@pempcar No sound from Andriod at all, even when playing original audio or video files saved on Andriod.

@@TheNekry1 I understand your question, which model of product did you buy, please send an email to our after-sales team with the order number at the same time, go to work tomorrow in China time, and they will reply you in time. thanks