plumbing the airride valves on our 67 C10 

I haven't had any issues with the fittings just make sure there really straight cuts and use dot approved line

@@ccgarage5040 right on. How have those solenoids worked out?

@@jamesr1696 still working good

Frame behind the the rear wheels was 8.5 inches off the ground when all the way aired out

Hello, Could you make it lower and how?

@@EASTCOASTIMPERIAL the truck is much lower now if you watch come of my newer videos the rear has step notches now and the center of the bed floor is removed and in the front I cupped the lower control arms and pancaked the cross member

I used 18awg

Here's the link to the one I bought www.ebay.com/itm/282501343171?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=LG9mBZ7MQ_a&sssrc=4429486&ssuid=3NrCZTTaTg2&var=&widget_ver=artemis&media=COPY

www.ebay.com/itm/320628655217?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=z_I1p9JjT0G&sssrc=2349624&ssuid=&var=&widget_ver=artemis&media=COPY

Vixen Air 3/8" NPT Air Ride Suspension High Flow Normally Closed Electric Air Valve (Solenoid) 210 PSI Four Corners VXF2038-8 a.co/d/61LldQb here is the link to the valves I'm using I don't remember where I found the controller but Amazon has some

Any trouble with them vixen valves

It wasn't a kit everything was purchased individually on Amazon

Beduan Pneumatic Tubing Pipe 3/8" OD Blue Air Compressor PU Line Hose Tube for Water Fluid Transfer 10Meter 32.8ft a.co/d/0Qmqh0F

www.ebay.com/itm/320628655217?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=z_I1p9JjT0G&sssrc=2349624&ssuid=&var=&widget_ver=artemis&media=COPY

What do you mean?