the trailblazer is having issues again, this time in the transmission. It's the silent chain on the inside. Gonna just replace the chain, the oil seals, and maybe the bearings if I decide they need replacing
Thanks for the video I watched a few others but your the only one who pulled the transmission without pulling the primary clutch. saved me a few $ and time with that tip!
One thing to keep in mind when the bike is running if it's idled up too high you try to put it in gear it will grind gears there's a difference between a bike that will go in to gear and then make noise is more likely the chain is loose causing it to skip teeth but if your bike goes into gear and you go to throttle into it and it makes a grinding noise but not your internal chain in your transmission I just don't want to see anyone waste their time and labor if this was not the issue Just thought to put that out there That's a lot of work to pull a transmission to find out there's nothing wrong with it so before attempting to pull your transmission turn the idle down first then see if it hops in the gear some of these bikes actually had a transmission break to stop it from rotating until you were in the gear
My Trail Boss 325 sounds just like that just wondering how do I take out the transmission took off all the bolts and chain and all but cannot remove the transmission
Hey man I need some help where did you get the chain from and what's the part number and cost thanks would really help out I cant fine the chain anywhere
Hey I got an 05 trailblazer and somone said the silent chain is bad but anytime I get on the throttle at all it just pops real aggressively do you think that's what it is If you can help I would much appreciate it
Hi man thanks for posting it's helpful for me I just bought a trail blazer and having the same problem.. did you replace the dogs you mentioned at 6.28 or did you just replace the chain and bearings 🤔🤔 ??