Тёмный

Pool pump install ~ howididit ~ 

 ~ howididit ~
Подписаться 4,4 тыс.
Просмотров 14 тыс.
50% 1

Hello there, how are ya? Welcome to ~ howididit ~ My mothers pool pump went out, so I bought a 1 1/2 hp pool pump off amazon for $159. and installed it in a day. Florida had some junky weather so not much filming was done, but I think over all it came out pretty good.
Thanks again for watching, liking, and subscribing to my channel, have a wonderful, and Blessed week.
~ Revelation ~ • God only knows
~ howididit ~ FB / howididit2019
~ howididit ~ apparel how-i-did-it-2...
Music is from the RU-vid library
Disclaimer: All videos produced by ~How I Did It~ are provided for entertainment purposes only. Some projects, materials, and techniques may not be appropriate for all ages or skill levels. The techniques used in these videos are a simple breakdown of ~How I Did It~ . Please use, and follow all safety precautions while doing your projects. ~How I Did It~ does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information viewed on this site. Viewers must be aware by doing projects on and around their homes, and property they are doing it at their own risk, and ~How I Did It~ cannot be held liable if you cause any damage to your property. It is the sole responsibility of the viewer to educate yourself on your local requirements, codes, safety precautions needed before undertaking any sort of projects.

Опубликовано:

 

18 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 19   
@alexstixx
@alexstixx Месяц назад
Thank you, I'm looking up videos on installing this thing to put mine in right now so I appreciate your video!
@howididit
@howididit Месяц назад
You are welcome. Sand sure beats cartridge filters.
@taylorlightfoot
@taylorlightfoot 2 года назад
What kind of glue is the black glue? I'd make sure the glue you used is meant specifically for PVC since plastic fittings aren't "glued", they are technically solvent welded connections. The glue (solvent) needs to be compatible with the type of plastic for a long lasting and reliable connection.
@howididit
@howididit 2 года назад
It was for the black PVC pipes on my RV. I sure made a mess of it, but for now it is working. I think I may have to revisit this in the future, but at the time it is all I had on hand.
@taylorlightfoot
@taylorlightfoot 2 года назад
@@howididit Though uncommon, I have seen black PVC before, you'd have to check what it was. Usually black is ABS and that's a different plastic and solvent from PVC. Luckily your pump pieces are easy to redo if they leak down the road, but it should hold for a good while even if it was ABS solvent.
@howididit
@howididit 2 года назад
@@taylorlightfoot Thanks, I learn something new just about every day. You rock, thanks again.
@T.O.N.Y707
@T.O.N.Y707 Год назад
that is ABS glue not pvc glue . there is no such thing as black pvc glue
@Boozar88
@Boozar88 Месяц назад
Hi, what’s your pool capacity
@horta24
@horta24 6 месяцев назад
How did you hardwire inside new pump? Has extension cord quick connects.
@howididit
@howididit 6 месяцев назад
I hard wired a gfci, and plugged the pump in.
@bobgraham1277
@bobgraham1277 3 месяца назад
at 1:06 What ring? I see collar like a ring.
@howididit
@howididit 3 месяца назад
That's it
@floydbeard5073
@floydbeard5073 4 месяца назад
This pump still working good?
@howididit
@howididit 4 месяца назад
It is. The one down side is the shaft seal sprung a leak, I'm sure it's due to the old surface(skin coating) of the pool coming off the sides of my pool when vacuuming. I am still happy with the pump, and I am trying to find replacement seals as this will be an ongoing issue unless i have the pool resurfaced.
@floydbeard5073
@floydbeard5073 4 месяца назад
@howididit how is the suction power? I am looking for a pump that has suction lift more then 10' that can move a lot of water through a 24' filter
@howididit
@howididit 4 месяца назад
@@floydbeard5073 suction is good, I would go with the the 2 hp if I had it to do all over
@floydbeard5073
@floydbeard5073 4 месяца назад
@howididit thanks for you're reply I appreciate it thanks
@mariodelgado9729
@mariodelgado9729 3 месяца назад
Another hack using non-Nema 3R fittings, good job, not!
@howididit
@howididit 3 месяца назад
Thanks, I appreciate you watching
Далее
How to Install a Pool PUMP Quick and Easy!
11:58
Просмотров 163 тыс.
Bike Vs Tricycle Fast Challenge
00:43
Просмотров 14 млн
Doheny's replacing your above ground pool pump
7:38
Просмотров 39 тыс.
Installing a pool sand filter. Pool series #2  Ep #784
13:42
Vevor 2.5hp water pump
5:48
Просмотров 18 тыс.
replacing a hayward above ground pool pump
9:52
Просмотров 60 тыс.
VEVOR Sand Filter Ground 16 inch
10:05
Просмотров 37 тыс.
How to install an above ground pool - Start to finish
15:15
How To: Determine Why A Pool Pump Won't Prime
4:12
Просмотров 1,2 млн
Bike Vs Tricycle Fast Challenge
00:43
Просмотров 14 млн