Poormanmods h1c turbo upgrade

Подписаться 35 тыс.

Просмотров 16 тыс.

50% 1

H1c H1E upgrade rebuild kit : turbolabofamerica.com/holset-h...
H1E H1C WH1C WH1E rebuild kit : 421b62.myshopify.com/products...
62mm H1C H1E housing, wheel, plate, and rebuild kit upgrade : 421b62.myshopify.com/products...
67mm WH1C turbine housing upgrade with Wastegate : 421b62.myshopify.com/products...
64mm WH1C turbine housing upgrade with Wastegate : 421b62.myshopify.com/products...
H1C hx35 60mm by 70mm T3 .82 turbine housing 3 inch v band exit : 421b62.myshopify.com/products...
67mm Hx40 t3 .82 housing 3 inch exit : 421b62.myshopify.com/products...
64mm hx40 t3 .82 housing 3 inch exit : 421b62.myshopify.com/products...
64mm by 76mm hx40 10 blade turbine : 421b62.myshopify.com/products...
67mm by 76mm hx40 10 blade turbine : 421b62.myshopify.com/products... Buy Hx40 62 mm turbo amzn.to/2McJpXG
H1c upgraded turbo rebuild kit amzn.to/2TUfciL
Hx40 .82 t3 turbine housing + vband flange and clamp amzn.to/2M7GU8Q
Mikes channel / poormanmods
HX40 62.35 x 86mm Billet Compressor Wheel 421b62.myshopify.com/products...
HX40 Rebuild Kit 421b62.myshopify.com/products...
Buy Hx40 62mm turbo amzn.to/2McJpXG
Buy hx40 67mm turbo 421b62.myshopify.com/products...
Build your own turbo product links
HX40 64 x 76 10 Blade Turbine: turbolabofamerica.com/hx40-10-...
HX40 67 x 76 10 blade turbine 421b62.myshopify.com/products...
HX40 67 x 89 x 95 compressor : 421b62.myshopify.com/products...
HX40 67 x 89 x 95 compressor wheel + housing: 421b62.myshopify.com/products...
HX35 HX40 machined to fit 60, 62, 67 and oringed Bearing Housing :
421b62.myshopify.com/products...
HX40 Rebuild Kit: 421b62.myshopify.com/products...
HX40 Compressor Housing and Wheel Packages: bit.ly/1HWBJ7p
HX40 67mm Comp Housing + Billet wheel Package: bit.ly/1NXCOOF
Billet wheel Upgrades:
HX40 4015c 60 x 86 x 90 Billet Compressor Wheel Buy Here:
turbolabofamerica.com/holset-h...
HX40 62.35 x 86 x 90 Billet Compressor Wheel
421b62.myshopify.com/products...
HX40 63 x 99 x 103 Billet Compressor wheel (hx50 Compressor Wheel for HX40 turbo)
ebay.to/2hjPCB3
HX40 67 x 89 x 95 Billet Compressor Wheel
421b62.myshopify.com/products...
Shopify links for hx35 hx40 parts and upgrades:
Hx35 / Hx40 rebuild kit:
421b62.myshopify.com/products...
Replacement hx35 turbine shaft
421b62.myshopify.com/products...
Compressor housing upgrades:
60mm hx40 billet wheel and housing
421b62.myshopify.com/products...
62mm hx40 billet wheel and housing
421b62.myshopify.com/products...
67mm hx40 billet wheel and housing
421b62.myshopify.com/products...
Hx40 bearing housing machined to fit 60mm 62mm and 67mm comp wheels and oring :
421b62.myshopify.com/products...
Turbine housing and shaft upgrades:
67mm hx35 turbine housing upgrade with Wastegate
421b62.myshopify.com/products...
64mm hx35 turbine housing with Wastegate
421b62.myshopify.com/products...
64mm hx40 10 blade turbine
421b62.myshopify.com/products...
67mm hx40 10 blade turbine shaft
421b62.myshopify.com/products...
Hx35 complete upgraded turbos for 5.9 cummins 12v & 24v:
60mm 650hp
421b62.myshopify.com/products...
62mm 650hp
421b62.myshopify.com/products...
67mm 750hp
421b62.myshopify.com/products...
If you need Parts for Your Turbo Build we also Sell Everything to Build New Turbo Chargers. We Also Sell these billet wheels.
Holset Turbo Specs:
HE341 Specs (same as HY35, besides some had 56 x 78 7blade compressor wheel)
HE351 Specs (HX40 60 x 86 7blade compressor, 58 x 65 Turbine(same turbine as HY35
HX35 Compressor Wheel: 54 x 78mm (7 blade), 56 x 78 7 blade (rare), 56 x 83 8 Blade, (50 x 78 7blade(extremely rare))
HX35 Turbine Wheel 60mm x 70mm 12 Blade Turbine Wheel
HX40 Compressor Wheel: 56 x 83 6Blade, 58 x 83 8 blade, 60 x 86 6 blade (pro wheel), 60 x 86 7 blade((same as hx40 super)most common))
HX40 Turbine Wheels: 64 x 76 12 blade(most common), 64 x 76 10 blade(hx40 super), 67 x 76 12 blade(rare H1E variant), 67 x 76 10 blade. (machining required for the 67mm.

Авто/Мото

Опубликовано:

9 янв 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 58

@Blandy929 2 года назад

Fair play you've got balls to be machining such large off balance parts with no guarding!

@dapcooman2636 3 года назад

Interesting

@TheDragvw2180 5 лет назад

Beautiful work Austin

@michaelmorris2209 5 лет назад

awesome work.. im gonna need you for my n54!!!!

@boosted2.4_sky 5 лет назад

That's awesome Austin.... I'll be tuned in....👍

@PoorManMods 5 лет назад

Yessss thank youu 😍😍😍

@dixiemae5042 5 лет назад

Man all your stuff is shiny 🤩

@341miguel5522 4 года назад

That's awesome, thank you.....

@matafdo123 5 лет назад

Can you do a video on your polishing process for the compressor, the shine looks really good.

@crazymasina8524 5 лет назад

I know it's probably proprietary information. I'd be curious to see the polishing process.

@MrZilla500 5 лет назад

I've been trying to find replacements on your site for my 535xi since the first vid you did on them.

@jaymiller8451 5 лет назад

👀 I'm on the fence about doing a 535xi depending on how much power I can make on pump gas

@jonwodziak4167 3 года назад

I want less lag for my s366. Kind of annoying. Plus it needs a rebuild. Any way you could do that for me? It's going on a 2JZ

@timeeqaulssuccess8930 3 года назад

Your the bomb awesome I made mods but my H1C HOLSET VS BOR WARNER IS NIGHT AND DAYDIFFRENT HOLSET OUT LAST MY FRIENDS HAS used 1.5 million miles on HOLSET AND BORGWARNER WENT OUT 500,000 MILES I remember when I seen the first one or who ever did it long time ago awesome work I miss working and building manifolds and parts

@wesoakes 5 лет назад

Subbed from PMM 👍

@josephcirelli9642 5 лет назад

Thanks for making such informative videos! I’ve learned a lot from them. I bought my first diesel last March. A 2005 Ford F-350 6.0L. I have to admit, I get a little lost watching your videos cuz I’m so new to turbos, Lol If I wanted to take off my turbo & send it to your shop to clean, repair/upgrade what’s the turnaround time once you receive it? It’s my daily drive so downtime is very important. I’m looking for reliably as said it’s my daily drive & pulls my 30’ Travel Trailer a few times a year. I’m not having any issues, this would be a prevented maintenance job. Thanks

@95blkmax 5 лет назад

dang dude on your time off you could certainly benefit from making a lid for the lathe with a plexiglass window. It would significantly cut down on the mess each cut makes and concentrate it at the lathe's area only. Keep up the great work!

@turbolabamerica 5 лет назад

It has a shield but the housing had too much swing distance so I had to remove it for this job

@mylifeisdope916 5 лет назад

ive got a wh1c on a 5.9 12v cummins. How much would a replacement similar to the unit in the video cost, built for mostly dd and mild towing ~10k lbs.

@hasmkrom555 5 лет назад

Good day Sir, you any upgrade turbo for Sonata LF or Optima TF ?

@kasanh9546 5 лет назад

How you get that beautiful shine in the anti-surge housing???

@turbolabamerica 5 лет назад

220 grit, 600 then polish

@topper348 5 лет назад

I really like your informative videos. I have a DSM 4G63-powered Mirage and want to make 7-800HP. What turbo would you recommend?

@turbolabamerica 5 лет назад

Hx40 with 67 turbine and 62.45 compressor or 67 mm compressor

@Thr33.Sid3z 5 лет назад

Garrett FTW! GTX35R is always the answer. 3576R if you want 700awhp & better response, or 3582R if you want 800awhp+

@gammalight1312 5 лет назад

Learning

@CumminsDslPwr 5 лет назад

The housings look really nice after you've opened them up. Do you ever find any porosity in the castings when you're machining them? I don't know but they just look rough on the outside like they are sand cast, so seeing them all machined out almost polished is kind of a surprise.

@turbolabamerica 5 лет назад

The early models have a lot of small air pockets, if I pressure wash it with a 0 degree tip it tears up the air pockets, when sanded smooth you can see them so easy.

@Blackbird46 5 лет назад

Looking to upgrade my TD06-17c on my gmc typhoon been following you channel since I found your video with you mentioning the TD06-17c. What are my options that you could provide? I've seen the batmowheel being talked about, I want to keep everything simple and bolt on but open for options. Thanks for the good informative videos.

@turbolabamerica 5 лет назад

The options are the same as here Subaru STI, Legacy GT, WRX Turbo Upgrade Options ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uyjrj2B46cA.html I’m trying to clear out a few more projects before I add more. Maybe in a week

@antn8387 3 года назад

if i send you a 6.0 powerstroke turbo core, can you rebuild/polish it all in one?

@ramonewhyte3307 5 лет назад

Can you do a turbo upgrade on a bmw n54 twin turbo? If so how much and what’s the max output?

@turbolabamerica 5 лет назад

N54 Turbo Upgrade ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nhsa9PnrV3Q.html

@rickyward24v74 4 года назад

How much would you charge to do my turbo. Lb7 duramax

@MrZilla500 5 лет назад

Holy crap, where do you put a cummins turbo in a BMW engine bay??

@Miggys.Garage 5 лет назад

Easy.

@tsiawdspyder 5 лет назад

What's the link for Mike's channel with the supra?

@turbolabamerica 5 лет назад

ru-vid.com

@ccv2love1 4 года назад

I want a price on h1c upgrade it's going on a 4 cylinder

@jaymiller8451 5 лет назад

What camera do you use when you film your videos?

@turbolabamerica 5 лет назад

iPhone X , the first 90 videos I filmed on my computer. Then I used an iPad , then iPhone 6s, then a newer iPad because I needed more space. We take and edit a lot of photos of our products

@nedtrevil8777 5 лет назад

Can you cast custom exhaust housings?

@turbolabamerica 5 лет назад

What housings are you thinking of making

@nedtrevil8777 5 лет назад

@@turbolabamerica I would like to recreate the old precision gt4067 open t4 flange housing. What are your thoughts?

@turbolabamerica 5 лет назад

I haven’t seen that one before. Are you trying to create the whole turbo? Making the turbine housings aren’t too costly usually I did get a quote of 15k for a development fee on an Evox turbine housing once some housings cost more to make than others. I had a few made, that are really good quality.

@nedtrevil8777 5 лет назад

@@turbolabamerica I have an existing housing. Could you provide a re-engineering service?

@frankscavo8186 5 лет назад

Hi I’d like to get in touch with you about a turbo build for my Jeep

@turbolabamerica 5 лет назад

Do you have the turbo Deisel Jeep Liberty

@frankscavo8186 5 лет назад

Turbo Lab America no a 4.0, I will need about 320-360 lb/min to meet my peak needs at 1.6 pr

@frankscavo8186 5 лет назад

2001 Jeep Cherokee I just rebuilt the engine for boost

@brianlau8316 5 лет назад

👍hey do u have a kit for 2003 cummins turbo ??? I think its ?HE341? or sell a upgraded drop-in turbo? I've been watching for couple years now , and may have already asked u this before .

@turbolabamerica 5 лет назад

2003 - 2007 Dodge Ram 5.9 Cummins HE351CW Turbo Rebuild Kit ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uD9HYjfyVtI.html

@turbolabamerica 5 лет назад

I also have parts to make an upgraded turbo for the he341, we sell the turbo for 850, 200 of which is a refundable core charge

@brianlau8316 5 лет назад

@@turbolabamerica ok , I was under the impression my 2003 had 341 .. but id like the upgraded turbo . 👍👍

@skatershawn410 5 лет назад

What about a Saab upgrade give away?

@skatershawn410 5 лет назад

or shit... maybe id just take a Holset and swap in on my Talon!

@AutoBodyEverything 4 года назад

You should have many more subscribers than you do but it’s probably because everyone else is editing and making their videos fancy for viewing entertainment but a lot of those ppl are more amateur than experienced or pro.. I support you and mayyyyyybe you should fancy up your vids even if it’s not your thing bcs viewers have a very short attention span and you are not a high energy person party 🎉 🎈 lol....

@dixiemae5042 5 лет назад

Puppy made a mess 🤦🏻‍♂️