Possibly the best sandblast cabinet ever made. Setup & Operation Procedures Sandblasting done right!

The Blast-It-All Abrasive Blast Cabinets- Est.1971

Подписаться 1 тыс.

Просмотров 35 тыс.

50% 1

The "Little Blaster" Model LB4024-3 Setup & Operation
How to setup and operate your new LB4024-3 Blast Cabinet
For more information visit blast-it-all.com/little-blaster
(800) 535-2612
Timestamps
00:00 Little Blast Series Unboxing Intro
01:12 Tools Required to Assemble Little Blaster
01:59 Little Blaster Included Accesory
03:24 Barb Fitting for Hose Connection
03:58 Regulator and Foot Pedal Hookup
05:00 Connect Regulator to Compressed Air Hose
06:04 Connect Foot Pedal Outlet to Inside Machine
06:36 Moving Reclaim Out of The Way
07:09 Additional Accessories
07:43 Connecting Suction Blast Gun
10:04 Pop In Gloves Installation
11:18 Mylar Roll Installation
12:43 Media Reclaim and Metering Valve Installation
14:34 How Does a Media Reclaim Work?
15:25 Hook Up Media Reclaim Flex Hose
15:40 Install Dust Bag
16:37 Plugging Up Media Reclaim and Cabinet Power
17:00 Connecting Crompressed Air Source
17:46 Turning On The Little Blaster
18:26 Replacement Parts
20:45 Little Blaster Parts Door
21:20 Little Blaster Double Wall Door
21:54 Outro

Наука

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@MrGuillada 3 месяца назад

It is a very good blasting machine, I used daily 8hours for years and allways workin good.

@BraveLoch32 4 месяца назад

Well though out and well built. Wish I had the money to get one.

@MrTuberguber 6 месяцев назад

An adjustable forearm pad would be a nice accessory for someone that stands at it all day (like I did). Maybe gel around the openings. The trap door for fallen items is a nice feature. Double doors to prevent warping is a good idea.

@blastitall 6 месяцев назад

We have an adjustable arm rest that can be added to our blast cabinets. You can see it in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-O_VqJ7AHZHk.html

@jameschuke4104 3 месяца назад

Never seen a cabinet that is good period yours not any better

@blastitall 3 месяца назад

If you are close by we would love to let you see it in person. We are also looking for way to improve. Do you have any suggestions?

@LorenP Год назад

This blasting machine looks very nice, thanks for the video! Can the dust outlet of the reclaim be installed through the wall to the outside of a building to eliminate the dust bag and having to clean the bag?

@blastitall Год назад

We recommend our customers trap the dust and dispose of it responsible. Even with eco friendly blasting media other materials can be added to the dust through the blasting process. If you are looking to cut down on the maintenance and mess a bag can sometimes be, you could look at out cartridge dust collectors with revers pulse cleaning. blast-it-all.com/cartridge-collectors/

@jarexxsuvexx8212 Год назад

Looks interesting so went to site to check out pricing. There was none. I guess they dont sell direct to the public or apparently wants visitors to their website to fill out their personal info to provide pricing.

@blastitall Год назад

We have resellers around the continental US and Canada. When the online form is filled out it is only used to connect you with one of our resellers.

@LorenP Год назад

On the LB reclaim, would there be any benefit in using your 400 CFM on the small cabinet? Or would the 400 be overkill? Thank you and happy holidays.

@blastitall Год назад

We do have some options for that, but for most customers they are not needed.

@djlord9189 Год назад

Hi there. This is interesting. Am I right in thinking, that this cabinet setup with this particular cyclone has no extraction in the upper part of the cabinet? As far as I can tell, the cyclone pulls media from the bottom of the cabinet, which presumably is filled to a level above where the media outlet to cyclone pipe exits the cabinet. This then negates any dust clearing effects of the visible airspace inside the cabinet would it not? The cyclone in this case is not an extractor, but rather a fine media dust separator. Does the cabinet not get dusty and visibility reduced with this system? How much media would you keep in a system like this? Thanks.

@blastitall Год назад

Thanks for your question. No media or dust remains in the cabinet. All dust and media are pulled via 300 cfm of air flow from the bottom of the cabinet through a 4" flex hose and enters the reclaim to be separated. The heavier re-usable media falls through a trash screen that separates any heavier debris/trash from the blasting process and and into the bottom cone where it can be fed back into the blast gun. Dust being light enough to be extracted is pulled from the good media and turns vertically where it follows the airflow into the dust bag or dust collector for collection and disposal. If you have any more questions, feel free to email us or call. We'll be happy to go over the operation.

@mrrberger 2 года назад

Ya didnt demo it with media, ya said ya would.

@blastitall Год назад

Sorry about missing that. We'll get that added ASAP

@kevinhamling1963 Год назад

What would be the smallest cfm compressor this cabinet needs to run.

@blastitall Год назад

The Little Blaster has a standard gun with a 21 CFM @ 80 PSI Air Jet. We do offer a 12 CFM @80 PSI Air Jet. You can find the 12 CFM Air Jet here: blast-it-all.com/product/3-air-jet-with-3-32-orifice/ You can find more information about CFM requirements here: blast-it-all.com/cfm_requirements/

@chipsammich2078 Год назад

Do you sell just that Mylar dispenser reel attachment??

@blastitall Год назад

Yes, and we also sell window conversion kits so it can work with other manufacturers cabinets. Here is the Mylar Roll Dispenser: blast-it-all.com/product/mylar-roll-dispenser/ Here is one of the window conversion kits: blast-it-all.com/product/window-conversion-kit-z-styles/

@chipsammich2078 Год назад

@@blastitall My cabinet has a 15" window..

@blastitall Год назад

@@chipsammich2078 The adapter plates come in different sizes to cover the existing space where the window is and the window offset holds a the new glass window. The adapter plates come in 14.5″ x 26″, 26″ x 16.5″, and 15″ x 22″. The window offset holds the new window and allows the mylar to slide through to protect the window. The new window size will be 12" x 20". You will lose a little size on the window when converting to a mylar dispenser system from an existing window. Here are all three kits and the window offset. 14.5″ x 26″ blast-it-all.com/product/window-conversion-kit-t-styles/ 26″ x 16.5″ blast-it-all.com/product/window-conversion-kit-e-styles/ 15″ x 22″ blast-it-all.com/product/window-conversion-kit-z-styles/ Window Offset blast-it-all.com/product/window-frame-kit-offset-type/

@chipsammich2078 Год назад

@@blastitall ok im gonna have to get some measurements when I get home to see if I can make one work.. but I think I have a 15x30 hole

@blastitall Год назад

@@chipsammich2078 If none of our adapter kits work you could make your own adapter and then purchase the window offset kit. The window offset has an outer dimension of 22" x 13.5" and an inner dimension of 18.5" x 10.5".