Power Washer NO Pressure! Let's see what's inside! Cheap fix???

Подписаться 3,7 тыс.

Просмотров 20 тыс.

50% 1

Troybilt pressure washer saved from the trash for a friend. Diagnose and save money with repairs but didn't work out as planned. Thanks for watching!
-Ray
Links to products on Amazon:
Pliers (Vampliers): amzn.to/42Z0B9J
Flip socket: amzn.to/3M6q8YP
Pump I used: amzn.to/3owgeWX
This page contains affiliate links. If you purchase a product through one of them, I will receive a commission (at no cost additional to you). I only ever endorse products that I have personally used and benefitted from Personally. Thank you for your support!
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or lose that my result from the improper use of tools, equipment or information contained in the video is the sole responsibility of the viewer and not Ray of all Trades. Please ensure that you take all proper recommended safety before attempting any project. Ray of all Trades assumes not liability for property damage or injury incurred as a result of any of the information contained in the video. If you would like to send a product for me to honestly evaluate or just things you think I could use, please mail to:
Ray of all trades
PO Box 6016
Fredericksburg , VA 22403
*Items will not be returned unless return postage is included
I appreciate each and every one of you!! Thanks for hanging out with me - Ray .
.
Please check out my friends channel at / @collectingwatches Want to send me swag, merch, tools I don't have or parts to review?
Send them to:
Ray of all Trades
754 Warrenton Rd Suite 113-131
Fredericksburg, VA 22406
*Please note that items will not be returned unless postage is provided.

Опубликовано:

7 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@michaelgood1576 11 месяцев назад

So after watching the video, I disassembled and inspected my pump finding the unloader valve stuck. Cleaned everything in vinegar and used a little silicone grease on the unloader valve. Fourteen year old pump once again washed my house good as new. Thanks for the video, saved me $100 and shipping time, sorry Mr retailer, you lose this time, RU-vid wins.

@RayofallTrades 11 месяцев назад

Awesome!!

@go4lowcost652 Месяц назад

A practicing student of RU-vid University!!!

@wesleyjackson468 3 месяца назад

I believe PB Blaster is petroleum based so it should not be used on plastics or rubber. Great video BTW!

@RayofallTrades 3 месяца назад

That is a great tip. Thank you!

@DavidDrayer Месяц назад

Great video!

@RayofallTrades Месяц назад

Glad you enjoyed it

@Rein_Ciarfella Год назад

I’d still like to know definitively why the original pump failed. It’s always good to add a filter screen to the inlet water side to prevent debris from damaging the pump. I got some hose washers with built in stainless cone screens I add to every pressure washer I work on or use.

@RayofallTrades Год назад

Thats a good idea. We have hard water around here and the sediment corrodes the internals is my best guess.

@philliphall5198 Год назад

I very much agree and I even flush hose first also

@philliphall5198 Год назад

Can flush with RV antifreeze will help with hard water after use

@gregmccarter2176 Год назад

Iv been working on equipment for over 40 years..3 things will kill a pump..one is not enough water per minute..two hard water such as iron, lime calcium..three letting the engine run too long without pulling the trigger..the water in the pump will get hot..and the heat will destroy the pump..I see them everyday...if your only going to use the washer once in awhile, you should use pump ease to clean the pump, then store the unit.

@w.j.bendellr.c.flying.1037 4 месяца назад

Great Video, Thanks. ⭐️⭐️⭐️⭐️⭐️

@RayofallTrades 4 месяца назад

Thanks for the visit!

@philliphall5198 Год назад

People need to flush their water hose before connecting to pump, grass and bugs will stick valves and unloaded 😊😊

@RayofallTrades Год назад

Good point

@RonGiacobbi Год назад

There are six check valve hard to get out but

@RayofallTrades Год назад

Thanks!

@jimlamb5508 6 месяцев назад

easy to get out with paint can opener that needs the sides ground down slightly. check valves are of poor quality.

@markcastrovinci6074 9 месяцев назад

Could you have replaced the o-rings inside of the pump. At 29:57 you said something about "the rubber inside of the pump just basically gave up the ghost". Were you referring to the o-rings? I would think not because I'm sure you would have tried replacing them. What "rubber" were you referring to? Thanks for the video. I have the same Honda engine on my Campbell Hausfeld PW2575 pressure washer.

@RayofallTrades 9 месяцев назад

To be honest, I didn't try the exposed o rings as I think the ones inside the valves were shot. I think those are seals. Several people have mentioned just soaking the unloader would have worked but I needed to get it back to the owner fast

@markcastrovinci6074 9 месяцев назад

@@RayofallTrades putting the issue of the o rings aside because most times they really are ok I think maybe the things you didn’t take out of the cylinders could have been the problem. The last time you said you messed with them you said you broke them. Well, maybe they were already broken. But you would have needed more time if you discovered these were broken as well.

@RayofallTrades 9 месяцев назад

@@markcastrovinci6074 yes those are the valves (check valves). Thanks for watching!

@selwyn13 8 месяцев назад

Can u clean it w/ brake cleaner also?

@RayofallTrades 8 месяцев назад

I would think that would be too harsh but I really don’t know

@jamiemorales2022 Год назад

my Friend im having trouble with my pressure washer i was wondering if i can replace the pump with a higher psi pump but will the motor handle a higher psi replacement or do PW motors have specific requirements for pumps?

@RayofallTrades Год назад

If it's relatively close it would work but the motor would bog down if it's too much load

@michaelgood1576 11 месяцев назад

Stuck unloader valve. Use vinegar to clean all parts, cheaper and mo betta.

@RayofallTrades 11 месяцев назад

Thanks for the tip!