Power Your Shed The Easy Way! NOCO GCP1 Power Port Review and Install 

Finally, a video that just gets to the point! Great video - Thank you!!

Will be doing this soon. Great Idea!

Great build! Very awesome

Great idea!!! I got the GCP2 (2 outlet cords) and can get temporary power and really use my shed

Great video 📹

Very nice video content. Thank you, sir.

Good job! Thanks!

exactly what I needed to know thanks

This what I use on my shed too!!

I like it! Well done!

Excellent video! Just what I was looking for! Thank you! Liked / Subbed...

Thanks for the education, didn’t feel like paying an electrician, just run an extension cable to the shed along the fence, out of sight out of mind. The outlet is GFCI so if anything gets over used it will pop, should be good enough for me and safety

I did the same thing about 2 years ago for my shed/workshop.

Finally got these. Got the one with the plug and other with dual cords for interior. Idea is run ext cord from the pool pump outlet ( had electricians run 20A buried wire to Pool already). 1770 Run 12/3 ext cord to shed so just plug in now. Have a second outlet for a Cobra street light which plugs into the female outlet from the other end. For now the cords run above ground but run thru 2" PVC. So far the PVC withstood TX sun, weed wacker, mower, and 2 ice storms. Idea is to run a buried line from the 20A but this is TX, you are not hand digging buried wire. LOL. Trencher a must. So far the cords are working fine and the PVC has provided a sturdy temp protection until a trench is made. Like these plugs because if I want to change out the way run or cord size I simply unplug VS unhook wires and things change so if shed gets relocated other changes we are not locked into a line buried here so have to plan around that. A good 12/3 cord 75' still allows good watts and amps without heating and tool lag. Using a 14 I can tell the difference. I moved my DIY street lamp 14' with the potlet plug in shed I easily unplug it and run the cord and pvc housing to the shed, shorter ext cord too. If buried line it would cost to move it.

Nice. I need one in at lest a 20amp for my bandsaw. I'm sure I can find one.

That works, and I use that same basic product in a portable power station I built, but for a shed located quite a distance from the house we found that a couple solar panels, charge controller, inverter and LFP battery was the way to go.

The outside is connected to the main house?

How would one install this in an insulated shed?

what can you run on this power port? Are you running any woodworking power tools

Didn't get it. What is the difference from just using an extension cord which, I guess, you used anyway to plug in that port?

Did you use a standard extension cord or contractor grade?

I get what you are doing…but until you have full power permanently installed, and since you’re running an extension cord to this installed outlet, why not just run a heavy duty cord every time? What am I missing here?

JUST DRILL THE HEFFER. MY GOD!

Where do I find this at

Why not just plug your surge protector into the extension cord that u are running to this waste of money? This us just another break in the wire to lose power and amps