Predator 212cc GHOST Install! Defective? 

Hi Tanner...run across & Google Calis Azusa, I think you'll find what you need there , cable fixtures & fittings etc..,have a look they've got an online catalogue...easy still if you fit a mild 22mm bike slider carbs to it if you've got a std predator or 160-196cc- 212cc clone engine, especially if you've disconnected the governor/throttle likeage, fitting a bike slider type carb makes hooking up a throttle cable as easy as fitting on a bike.Cheers from NewZealand.

It’s a cam noise! I have a great update video on the way

@@JacobSherwood that’s what I was thinking being the cam is a little more aggressive

mine does too! ghost too

she loves you too

@@JacobSherwood where did you get your kart ? Because I have been looking for one

@@Qunixy he didnt build the frame

99 or nothin …. Wouldn’t put 94 in my grannies lawnmower

@@AxlMetcalf Good for you mr know it all, im sure you arent in Cali.

@@lowlifeslides9918 my grannies lawnmower is 🤷🏻‍♂️ it laughs at your peasant juice

@@AxlMetcalf when I was younger I used to mix 93 for my yz80 and it was so much better than 87

Run 100 race gas if you can. It's honestly the best for these lil engines

If only making things simple was… simple. I’ll have a ground up race chassis restomod coming. I know the supply of frames is so low so my main goal is plan + parts list to get more people building themselves🔥

you can get them from bmi karts

XD

I’ve heard! I’ll be modding one and keeping one stock!

thank you

I'm doing the same thing now, did you figure something out?

for sure lol

Looks more like just excessive crankshaft endplay. I have an engine with extremely stiff valve springs and the cam gear lashing sounds like knock of death. But, it has almost 40 hours on it and going strong. Bearings in the rod still look new.

good to know! I'm definitely a noob on built engines lol

It comes in the accessory kit!

Yes! Completely normal cam noise

Check out the specs online! Better cam, hardened internals, etc. not a regular 212

Also interested in front spindles, I have the same frame and steering geometry style, just want max angle like his cart.

@@TheRewindBros same here.took it all apart to paint and putting back together with the same engine he has.just want angle and wheel specs

Bone stock everything excluding an extending pitman arm

People that make Videos should answer questions right!! I need that throttle cable too!! We need answers!

It really depends on how your going to build the engine. If you’re going to leave the motor pretty much stock and you have a heavy kart go with the torque converter if you’re doing a engine build with a heavy kart go with the torque converter with a juggernaut. If your kart is light and you’re going to be on the road a lot get a clutch and if you modify the motor with a spicy cam you’ll need to change the spring in your clutch to get the rpm’s up before it grabs cause performance cams raise the torque of the engine to a higher rpm. Most all cutches like max torque and cheap knock offs have a spring to change. If you want a clutch with some adjustments get a bully, viper, cheetah something like that they cost alot but worth it

Bro all it is is a piece of plastic pipe Lol'

@@jacobsebastien3910 I know I’ve been looking around construction sites and I find a bunch of 10 inch pvc. But those inner diameter‘s are 9 3/4 and my tire only fits is 9 1/4

Flywheel for sure but the rod should be good. It’s heat treated aluminum

@@JacobSherwood I’m pretty sure the stock predator 212 rod and the ghost have the same rod. Red beard on RU-vid or someone made a video of the internals and it’s scary. Worth a watch.

Thanks!!! Something like this is on the way

?

hella fast

@@JacobSherwood another question were do you got the angel eyes from? And we’re do you got the „tomei“ from ?

?

??!!

Break in oil is a waste of time and money but if it makes you feel good go ahead and use it. I hear that in the Ghost owners manual it says 10 hours for break in. I wonder what they were smoking.

I run 7°

@@JacobSherwood ! From nz

I have a gokart with a gx240 on it should be fine but couldn’t get mine to move With the governor on it, took it out and it runs about 60 mph

I've learned alot since Commenting that, made a new engine plate, mounted it, still haven't figured out what gearing it/ me like😂 What gearing are you using?

if you think women will drop panties over a kart then weve got issues here

12t/60t #35