Тёмный

Pro-Line Body Mount System with Secure-Loc 

The RCNetwork
Подписаться 83 тыс.
Просмотров 67 тыс.
50% 1

Pro-Line has come out with a great product to keep us on the track more and less searching for those pesky metal body clips. You know, the little clips that you lose more than socks in a dryer! Included with each version of the Extended Body Mounts Kit for your specific RC, the Secure-Loc cap cleans up the look of your RC and provides a great alternative to those little metal paper clip rejects!
Want to save some hard earned CASH???
Use coupon code "RCNetwork10" and save 10% off your order at
www.prolineraci...
Get the freshest goods shipped straight to your house! For The RCNetwork Subscribers only!!!
Here's where I got them and some info from Pro-Line:
prolineracing.c...
This is an Extended Body Mount Kit with Secure-Loc Caps for the XXX-SCT & TLR 22SCT Truck. Pro-Line continues to innovate with more must-have accessories for your Short Course Truck. The all-new Pro-Line body mount kit includes adjustable body mounts so you can fit any body on your truck perfectly, including Rally car bodies and True Scale Bodies! But, the Pro-Line Engineers did not stop there. Instead of just using the same old flimsy body clips that always get lost and bent, the Pro-Line Extended Body Mount kit includes a revolutionary screw on body mounting system for a strong and secure mount every time. No more getting stabbed in the finger by those nasty clips! Just screw down the included setscrew into the body mount, place the O-Ring over the setscrew and mount your body as you normally would. This new Extended Body mount kit adds safety, security and styling with Pro-Line's innovative screw on body mounting system! Get your Extended Body Mount Kit for your Losi XXX-SCT and TLR 22SCT today!
Completely adjustable body mounts so virtually any body will fit perfectly
Innovative screw on body mounting system (Secure-Loc Cap)
Designed Specifically for your Losi XXX-SCT and TLR 22SCT
Long body mounts included to fit Rally Car Bodies
Made from Ultra-Durable Nylon
Replacement parts:
6070-02 Secure-Loc Caps

Спорт

Опубликовано:

 

23 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 143   
@eunosmedia90
@eunosmedia90 3 года назад
This is the only vid i can find for how these things work thank you
@TheRCNetwork
@TheRCNetwork 3 года назад
Glad to help!
@MrJohnny2thumbs
@MrJohnny2thumbs 10 лет назад
Those are some real clean and trick looking body mounts
@TheRCNetwork
@TheRCNetwork 10 лет назад
Thanks Johnny! Already tested then out and they work great!
@MrJohnny2thumbs
@MrJohnny2thumbs 10 лет назад
Your welcome rich, I really enjoy watching all your video's
@medico1421
@medico1421 10 лет назад
nothing better than the good ol clips!!!! cant defeat the simple and cheap clip method if you want to make a semi permanent body mount, just use some shoulder screws with a flat washer,simple and cheap
@teofeo333
@teofeo333 2 года назад
Yep I was thinking the same ; look great, nicer than clips, not for racing due to time lost.
@TheRCNetwork
@TheRCNetwork 2 года назад
Very true
@wesleyhall3014
@wesleyhall3014 10 лет назад
I'm so glad you did this vid considering I just got these for my truck!
@TheRCNetwork
@TheRCNetwork 10 лет назад
Cool! Thanks for watching, Wes.
@TheRCNetwork
@TheRCNetwork 10 лет назад
I was able to do some test runs on my TLR22 SCT yesterday with the installed Pro-Line Secure-Loc body mounts. Nothing broke, the caps stayed very secure with just a small drop of blue loctite (Which was overkill, because they were hard to remove initially) and I didn't lose a cap! All in all, a great additon to my race truck!
@nate_meador89
@nate_meador89 9 лет назад
How does this solve the body clip problem? If you lose one of these you're pretty much up the creek until you order these special caps from proline. With a body clip most people have a spare or two that they would give you, or you could make your own. Other than that it's pretty cool and good review
@TheRCNetwork
@TheRCNetwork 9 лет назад
Forzalogistics45 It may not solve the "lost clip" issue (if you happen to lose one). but you're less likely to lose one of these. With a very small amount of Loctite, they stay on with no problems
@mwemaxxowner1
@mwemaxxowner1 6 лет назад
Wheel nuts work great in a pinch.
@englandstillhasit
@englandstillhasit 5 лет назад
Yeah you can just use M3 or M4 lock nuts. Better to buy a hand full of thumb nuts for PCs. They come in all colors and look fancy. They'd work perfectly. Infact im going to get some myself.
@englandstillhasit
@englandstillhasit 5 лет назад
The proline problem is much worse than lost clips. Think fire and hard to reach battery. Plus 4x nuts to take off before getting the battery out. Luckily my rc body is chopped so lifts at the sides and easy grab lipo. Im nervous one day my rc will burn lol. I seen too many others fire videos.
@buddahmayne9273
@buddahmayne9273 5 лет назад
@@englandstillhasit Better to be safe than sorry!! 👍
@Nickwillfixit
@Nickwillfixit 10 лет назад
Only trouble with them is once the nut's are lost you have to remove the system and go back to body clips, so you might aswel stay with the clips and use the body clip tethers several manufacturers produce or make your own as I do,unless they are going to sell or already do sell the nuts separately and supply a couple of spares in the packet. I run largescale gas trucks and buggies and like to get a scale look as much as is possible so anything that would replace the body clips is a bonus my Losi 5ive-T is the best with only four body clips pretty much out of sight and are tethered with my own home made tethers.
@TheRCNetwork
@TheRCNetwork 10 лет назад
I getcha! I think for a 2wd race truck both scale looks and heft is not a factor. I wanted to try a new design, that after the initial install and the use now, has shown to be a great design. As for losing them, I picked up the Secure-Loc cap set that extra caps and hardware.
@donmichaelcorbin4417
@donmichaelcorbin4417 5 лет назад
On the inside of my SCT body I've put two pieces of Gorilla Glue® brand duct tape over the holes, then take a sharpened pencil and push through from the inside. Now when you push the body down over the posts the tape grips the post - no need for clips!
@MaxxPainII
@MaxxPainII 10 лет назад
I have them for my Slash 4X4 with a Raptor Body and they work great for me. I want to try them on my Rally as I loose a body clip every time I drive it.
@TheRCNetwork
@TheRCNetwork 10 лет назад
I was able to do some test runs on my TLR22 SCT yesterday with the installed Pro-Line Secure-Loc body mounts. Nothing broke, the caps stayed very secure with just a small drop of blue loctite (Which was overkill, because they were hard to remove initially) and I didn't lose a cap! All in all, a great additon to my race truck!
@raulrodriguez6688
@raulrodriguez6688 4 года назад
I have just glued a small magnet on the body and problemo solved !!! No more lose body clips
@brunselltorp
@brunselltorp 10 лет назад
ok, nice clean product. but what happends when you loose a nut in the grass? a bodyclip can be replaced with just about anything like a piece of wire, a hairpin and so on when an emergency occours. just a thought.
@TheRCNetwork
@TheRCNetwork 10 лет назад
That's whay I picked up an extra set of Secure-Loc caps. I'm also going to use my loctite idea as well. The easy thing is I'm using this on a race truck that'll be on an indoor clay track.
@TheRCNetwork
@TheRCNetwork 10 лет назад
I was able to do some test runs on my TLR22 SCT yesterday with the installed Pro-Line Secure-Loc body mounts. Nothing broke, the caps stayed very secure with just a small drop of blue loctite (Which was overkill, because they were hard to remove initially) and I didn't lose a cap! All in all, a great additon to my race truck!
@lonestartex1
@lonestartex1 10 лет назад
The RCNetwork That's the problem, extra Secure-Loc Caps are 4 for $7, or get 120 body clips for the same price and there's a million ways to tether clips to the body so you don't lose them... not rocket science hehehe.
@TheRCNetwork
@TheRCNetwork 10 лет назад
It's all good! I wanted to try these out and they work great for my application. I think they're an upgrade. I'm sure that people will be using body clips for eons! Lol
@MANOSRC
@MANOSRC 10 лет назад
very cool...gonna get some for sure...thanks for sharing, cheers!!!
@TheRCNetwork
@TheRCNetwork 10 лет назад
Thanks Manos!
@TheRCNetwork
@TheRCNetwork 10 лет назад
I was able to do some test runs on my TLR22 SCT yesterday with the installed Pro-Line Secure-Loc body mounts. Nothing broke, the caps stayed very secure with just a small drop of blue loctite (Which was overkill, because they were hard to remove initially) and I didn't lose a cap! All in all, a great additon to my race truck!
@RConmyMind
@RConmyMind 10 лет назад
That is really a good invention!
@TheRCNetwork
@TheRCNetwork 10 лет назад
thanks RCHamburg!
@ronotardo
@ronotardo 8 лет назад
Awesome product.
@TheRCNetwork
@TheRCNetwork 8 лет назад
+ronotardo Thanks Ron
@TeamTraxass
@TeamTraxass 10 лет назад
Got them and lost one on the first qualifier. Was able to find it afterwords. Pretty hard to take off/on during the actual race, lost a lot more time than with the pins. Make sure they are well tighten. I do like how they look. My 2¢
@TheRCNetwork
@TheRCNetwork 10 лет назад
Cool, thanks for the info. I plan to run a bit of loctite on them to start.
@TeamTraxass
@TeamTraxass 10 лет назад
Good idea
@TheRCNetwork
@TheRCNetwork 10 лет назад
I was able to do some test runs on my TLR22 SCT yesterday with the installed Pro-Line Secure-Loc body mounts. Nothing broke, the caps stayed very secure with just a small drop of blue loctite (Which was overkill, because they were hard to remove initially) and I didn't lose a cap! All in all, a great additon to my race truck!
@TeamTraxass
@TeamTraxass 10 лет назад
awesome. after the qualifier, i had no problems with mine. I do like them dont get me wrong.
@socalrcguy1
@socalrcguy1 10 лет назад
I notice about those body mount caps in ur other video but I forgot to ask, anyways I tend to loose body clips to and for some reason cant find it anymore haha, Im realy into the big round clips but il try these ones soon and they look neat
@TheRCNetwork
@TheRCNetwork 10 лет назад
I think they're a great alternative to those little pain in the @ss clips
@TheRCNetwork
@TheRCNetwork 10 лет назад
I was able to do some test runs on my TLR22 SCT yesterday with the installed Pro-Line Secure-Loc body mounts. Nothing broke, the caps stayed very secure with just a small drop of blue loctite (Which was overkill, because they were hard to remove initially) and I didn't lose a cap! All in all, a great additon to my race truck!
@The1Karking
@The1Karking 4 года назад
Cool! Thanks! 🤩
@Rich-yj4ub
@Rich-yj4ub 8 лет назад
Hi rich, You stated these worked on your Yeti XL. I was wondering if they would fit on the front of the Axial Yeti 1/10 ? I will wait for your answer before buying. Thank you. You are always so helpful.
@TheRCNetwork
@TheRCNetwork 8 лет назад
+Smokey Bandit I'm not where my 1/10th yeti is....but the diameter of the rod on the secure loc posts are about 3/16th"
@brianhilligoss
@brianhilligoss 10 лет назад
How you liking your mip hex drivers? About to pull the trigger on them and since you have had them a little bit now I figured I'd ask you.
@TheRCNetwork
@TheRCNetwork 10 лет назад
Best drivers ever! Totally worth the money. I actually gave away all my other drivers.
@w_callaghan8300
@w_callaghan8300 7 лет назад
pro-line body mount system is great! BUT! i thought "this could be even better" and i went and perfected it. i'm way too proud about my little accomplishments
@rango_unchained
@rango_unchained 7 лет назад
Apparently way too proud to tell us how you perfected it.
@jacombe1
@jacombe1 10 лет назад
Hey rich. I was just wondering do they make these for the tekno sct410. Thanks buddy keep up the good work
@TheRCNetwork
@TheRCNetwork 10 лет назад
Not officially. I have used the SCTE version which are round and they fit into the square hole of the SCT410's body mounts. I had to widen the holes of the SCTE mounts as the SCT410 uses larger screws for mounting
@res1492
@res1492 9 лет назад
Have you tried filming on a black back ground, try it out you will find that the camera focus much faster and stays focused.Light for stills,Dark for videos.
@TheRCNetwork
@TheRCNetwork 9 лет назад
res1492 Thanks Res, I will try that. I appreciate the input, I'm still learning the best way to film and have invested in some serious equip over the past couple of months. What about a blue?
@socalrcguy1
@socalrcguy1 10 лет назад
Ya cool
@evancobbs7344
@evancobbs7344 3 месяца назад
Do this for the scx6 please
@TheRCNetwork
@TheRCNetwork 3 месяца назад
It should be easy to do....if you can still find these
@Wheelchair-bear
@Wheelchair-bear 9 лет назад
Nice review, thanks, does Proline sell the top caps only? I can see myself loosing them.
@TheRCNetwork
@TheRCNetwork 9 лет назад
Craig Blackmer Yep: www.prolineracing.com/performance-parts/pro-line-body-mount-thumbwasher-kit/
@saltybutsain6348
@saltybutsain6348 3 года назад
I think these would be perfect if they had some sort of lanyard
@TheRCNetwork
@TheRCNetwork 3 года назад
Kinda like AirPod tethers? They work fine without
@tua4154
@tua4154 2 года назад
Would these work for Arrma RC? Like the Vorteks, Big Rock, Typhon, and Kraton 6s?
@TheRCNetwork
@TheRCNetwork 2 года назад
I don't believe so
@chieffirewolfBorgman
@chieffirewolfBorgman 10 лет назад
And they don't vibrate off when running the rc? If not I might have to get me a pair for my rustler. Great vid
@TheRCNetwork
@TheRCNetwork 10 лет назад
I am going to add a small amount of loctite, just to give it some tackiness when threading on/off
@chieffirewolfBorgman
@chieffirewolfBorgman 10 лет назад
I might get that and try lock tight thankyou good call and vid man
@TheRCNetwork
@TheRCNetwork 10 лет назад
Thanks Chief!
@DADDYJAMES843
@DADDYJAMES843 10 лет назад
chieffirewolf Borgman if you ues the little fome pad they wont vibrate off i have them on my slash love them
@chieffirewolfBorgman
@chieffirewolfBorgman 10 лет назад
BIGJAMESRC thanks bigjamesrc I'll try it out
@HL-OOI
@HL-OOI 6 лет назад
Another 100 years invention is today we are still using grub screw on the pinion..with the huge amount of power today the grub screw easily slip off the motor shaft even with 24 hours of threadlock..why can’t just come out with new standard to have a screw going thru the motor shaft instead, to have a good grip and torque..
@englandstillhasit
@englandstillhasit 5 лет назад
Significantly weaker rotor shaft mayb. I agree its pretty basic atleast add two grub screws. C clips are the worst. Those things are lazy designers duct tape. Hb tessman buggt uses c clips on the diff outdrives ther horrid things to put on without ruining them.
@juancarlosgachuzmaya5336
@juancarlosgachuzmaya5336 8 лет назад
will this fit the Losi eight buggy 3.0?
@tyroneholmes-xf8bq
@tyroneholmes-xf8bq 7 месяцев назад
Can’t seem to find the round body poles/ arms anywhere. All the new ones seem to be square. Looking to get some for my rival mt10 and would need the round ones. Can anyone point me in the right direction please. Cheers
@TheRCNetwork
@TheRCNetwork 7 месяцев назад
Yeah, it seems that they've revamped the secure loc product line now
@MaxWilliams
@MaxWilliams 9 лет назад
yea it happens to me bro i just end up look for random ones around the track once i found 5 of then just lying at my pit table
@TheRCNetwork
@TheRCNetwork 9 лет назад
Rc Rage Nice!
@mattlucchini2636
@mattlucchini2636 8 лет назад
Are the Pro-Line compatible for a river hobby spirit VRX buggy with a bulldog (truggy) shell.
@TheRCNetwork
@TheRCNetwork 8 лет назад
Not sure....never heard of that buggy
@Dnello76
@Dnello76 10 лет назад
Do they fit 1/10 scale monster trucks
@TheRCNetwork
@TheRCNetwork 10 лет назад
Pro line has versions for the Traxxas line. Summit, Revo and Maxx trucks. Check the link in the video description.
@Cowboy4737
@Cowboy4737 7 лет назад
Do you need the adjustable up rites for these to work on a reg two wheel drive Slash?
@TheRCNetwork
@TheRCNetwork 7 лет назад
You shouldn't, just make sure you purchased the ones intended for a 2wd slash
@sbrown7395
@sbrown7395 4 года назад
Hey Rc network will this traxx stampede 4x2
@TheRCNetwork
@TheRCNetwork 4 года назад
Not sure on that one....
@charleshaas6466
@charleshaas6466 7 лет назад
Zero instructions included in my Pro-Line kit. Skip ahead to 4:00 to see how the majic comes together!
@666Beard
@666Beard 10 лет назад
Will the post fit in the scx10 shock mounts
@TheRCNetwork
@TheRCNetwork 10 лет назад
I think they'll be the right size, but you'll have to modify slightly to get them in as the ScX10 isn't round or square.
@bilalbajwa7253
@bilalbajwa7253 4 года назад
Do these raise the body at all?
@TheRCNetwork
@TheRCNetwork 4 года назад
If you consider the thick collar part under where the body mounts, that's possible, but I haven't had an issue
@markatkins9942
@markatkins9942 9 лет назад
I got a scte 2.0 and it only has one bar but i see 2 in this vid and whats it for
@TheRCNetwork
@TheRCNetwork 9 лет назад
Mark Atkins To keep them stable at higher levels
@markatkins9942
@markatkins9942 9 лет назад
Thanks
@onawafunderburk7721
@onawafunderburk7721 4 года назад
Can this body mount work for the blackout sc
@TheRCNetwork
@TheRCNetwork 4 года назад
Not sure....as I haven't owned that model
@onawafunderburk7721
@onawafunderburk7721 4 года назад
Okay
@XtremeRemoteControl
@XtremeRemoteControl 10 лет назад
I wouldnt use them for hardcore bashing as I do with my slash 4x4 I have a had some problems but I guess dropping from 20+ feet from a 7 foot jump back first dosent help ahaha :D
@TheRCNetwork
@TheRCNetwork 10 лет назад
I was installing them on a race rig for an indoor clay track. Even though, with a small amount of loctite, they're not coming off unexpectantly
@XtremeRemoteControl
@XtremeRemoteControl 10 лет назад
I think I might try some lock tight thanks for the idea :D
@ADVENTUREKM
@ADVENTUREKM 6 лет назад
Won't they comes loose from vibration?
@TheRCNetwork
@TheRCNetwork 6 лет назад
with a little loctite and the the included oring, it shouldn't and hasn't
@SmoothbassmanStudios
@SmoothbassmanStudios 6 лет назад
No problems for me.
@mxsales8426
@mxsales8426 4 года назад
What ones should I get for the yeti xl?
@TheRCNetwork
@TheRCNetwork 4 года назад
I believe these ones....but you'll have to fit them
@mxsales8426
@mxsales8426 4 года назад
@@TheRCNetwork Thanks! I enjoy your videos very much!
@HL-OOI
@HL-OOI 6 лет назад
Which one will fit the Tekno MT410?
@TheRCNetwork
@TheRCNetwork 6 лет назад
I'm not sure there's an official Tekno version of these
@HL-OOI
@HL-OOI 6 лет назад
The RCNetwork only for sct410..
@NorthernMaggot
@NorthernMaggot 10 лет назад
Do they fit tekno sct410?
@TheRCNetwork
@TheRCNetwork 10 лет назад
They don't make one for the Tekno, but I was able to use the round SCTE version in the square Tekno hole with no problem.
@alanlower2598
@alanlower2598 10 лет назад
Where can I get them
@TheRCNetwork
@TheRCNetwork 10 лет назад
The video description has a link to Pro-Line's website. If you act fast, they have 15%off through V Day.
@jacobclement7707
@jacobclement7707 8 лет назад
How do you do the back ones?
@TheRCNetwork
@TheRCNetwork 8 лет назад
Pretty much same as the fronts
@jacobclement7707
@jacobclement7707 8 лет назад
Okay thanks. :) Do you have a link of where I can order this product?
@shadowwgaming1237
@shadowwgaming1237 9 лет назад
will it work for hpi e firestorm
@TheRCNetwork
@TheRCNetwork 9 лет назад
shadoww gaming I'm not sure....haven't owned an HPI E Firestorm. It's very possible though if your comfortable slightly modding them to work. The rods measure 6.4mm, so check your body mounts and see if they'll fit
@shadowwgaming1237
@shadowwgaming1237 9 лет назад
ok thanks
@marrod2463
@marrod2463 7 лет назад
would it fit ecx amp
@TheRCNetwork
@TheRCNetwork 7 лет назад
Not sure on that one....you may have to be creative, as I don't believe Pro-Line makes parts for the ECX
@ps3gamer143
@ps3gamer143 10 лет назад
I hate these kept coming off even with blue lock tight i prefer using locking clips now never lose them
@TheRCNetwork
@TheRCNetwork 10 лет назад
I was able to do some test runs on my TLR22 SCT yesterday with the installed Pro-Line Secure-Loc body mounts. Nothing broke, the caps stayed very secure with just a small drop of blue loctite (Which was overkill, because they were hard to remove initially) and I didn't lose a cap! All in all, a great additon to my race truck!
@gtRCnetwork
@gtRCnetwork 10 лет назад
have fun with those piles of crap i broke them off the first day at the track and i only flipped once
@TheRCNetwork
@TheRCNetwork 10 лет назад
I keep the shiny side up! lol Nice name....
@TheRCNetwork
@TheRCNetwork 10 лет назад
I was able to do some test runs on my TLR22 SCT yesterday with the installed Pro-Line Secure-Loc body mounts. Nothing broke, the caps stayed very secure with just a small drop of blue loctite (Which was overkill, because they were hard to remove initially) and I didn't lose a cap! All in all, a great additon to my race truck!
@anomoly_tv4036
@anomoly_tv4036 7 лет назад
too long to unscrew... I use the Proline Pro Pulls... Cheap, faster and effective
@englandstillhasit
@englandstillhasit 5 лет назад
2 ads before the video started whattt
@TheRCNetwork
@TheRCNetwork 5 лет назад
Welcome to RU-vid....I "allow" ads on my videos, but do not have control of when or how many.
@ohmyqwad8705
@ohmyqwad8705 6 лет назад
These things aren’t great, the small metal shaft beats and cuts the body when you wreck, they’re hard as hell to line up and if you’re screwed loose one. I had them on a week and couldn’t wait to switch back. Save your money and Just use a rubber clip leash if you’re worried about loosing them
@TheRCNetwork
@TheRCNetwork 6 лет назад
Don't Wreck. lol
@coltonsmith6936
@coltonsmith6936 4 года назад
Rcnetwork it’s an rc car it’s gonna roll or flip every once in a while no matter what.i had these on my slash and they ripped clean through a brand new body
@simpleisthebest73
@simpleisthebest73 5 лет назад
Not universal
@Wazza722
@Wazza722 6 лет назад
They only work on flat bodys!If you lose one cap, one caps probably the price of 100 body clips!Dont like!
@nicholasvolovsek6814
@nicholasvolovsek6814 Год назад
Terrible no thought design. Just get the Arrma pins with a tether.
@TheRCNetwork
@TheRCNetwork Год назад
I like that it’s different. Is it perfect, no. And the Arrma clips came like 5 years after these, btw
@rebel6910
@rebel6910 7 лет назад
i hate body clips
@TheRCNetwork
@TheRCNetwork 7 лет назад
Totally agree
Далее
7 Ways You're Destroying Your R/C Car
10:28
Просмотров 1,5 млн
УГАДАЙ ЕДУ ПО ЭМОДЗИ! #shorts
00:57
Просмотров 105 тыс.
Simple Flower Syrup @SpicyMoustache
00:32
Просмотров 1,8 млн
How to Paint RC Car Bodies (Beginner Tips!)
21:42
Просмотров 42 тыс.
Extended Front & Rear Body Mounts Installation
5:28
Просмотров 53 тыс.
10 RC LiPo Mistakes & How to Avoid Them
10:03
Просмотров 866 тыс.
Make Your RC Car Body Last Longer RC Body Armor
7:44
The Best Performing Micro RC Crawler I've EVER Tested!
10:33
Pro-Line HOW-TO: Chrome Your Drag Wheels
11:15
Просмотров 25 тыс.
WhistlinDiesel Cybertruck Durability Test #1
21:55
Просмотров 21 млн
CUCURELLA VS HAALAND ☠️ #fcmobile #fifamobile
0:15