Process of robot Milling a Styrofoam Landscape Model

Подписаться 335 тыс.

Просмотров 39 тыс.

50% 1

A short time lapse video of making a landscape model using Kuka robots. This small project was commissioned by "Atmosfera" architecture studio and it will serve as a base for a tourist bungalow estate model. It was a short two day project and a perfect opportunity to try out some new filming methods using a robot:D I like how some of the shots turned out and I plan using these techniques in the future. I Had a lot of fun filming and I hope you enjoy watching!
Don't forget to like and subscribe!
Website: www.lignum-art.com/
Email: info@lignum-art.com
My instagram: lignum_chan...
My facebook: / lignumchannel
Atmosfera studio website: www.atmosfera.hr
Atmosfera studio instagram: / atmosfera.hr
Music:Johann_Strauss_-_Wiener_Blut_Op._354
Intro music: Danse Macabre - No Violin by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: freepd.com/Classical/Danse%20M...
Artist: incompetech.com/

Хобби

Опубликовано:

5 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 96

@joshwarner5676 3 года назад

I love the use of one robot to track and film the other robot

@lignumchannel 3 года назад

now that I've tried it, I love it too! :D

@xyvernthederg5760 3 года назад

add googly eyes on it when it uses a camera to make it 20x better

@evgeniydeus8137 3 года назад

One hella expensive steadicam)

@weberwoodshop 3 года назад

“Alexa, add gigantic photographer robots to my shopping list.”

@lignumchannel 3 года назад

@ОлегГриднев 3 года назад

Приятно смотреть на работу шикарной техники!

@FromTheHeartWoodMK 3 года назад

Super cool, I've seen stuff like this in museums and now have an idea how it's all made!

@lignumchannel 3 года назад

I doubt this one will end up there.. 😁 Glad you like it!

@CrankyPantss 3 года назад

That was very entertaining. I’m surprised you got the foam so smooth. Very cool video.

@lignumchannel 3 года назад

Thank you! After many models I found out a secret recipe of milling speeds, rpms, stepover and feeding types to get a this frosty glazing ;)

@dukeengine1339 3 года назад

And the music is simply wonderful...

@lignumchannel 3 года назад

Glad you like it Duke!

@peterslegers6121 3 года назад

I especially liked the scene from 2:16 to 22. You can see by which tool the model was shaped, but you also get a fast and smooth idea of how the landscape model turns out.

@lignumchannel 3 года назад

Glad you like it Peter! :D

@timberdish 3 года назад

That was very cool! Nice one :D

@lignumchannel 3 года назад

Thanks Matt! 😀

@Yakovlev_Alex 3 года назад

Штатив для камеры супер!!!

@lignumchannel 3 года назад

:D yes it is.

@Kathod 3 года назад

Using the second bot to record the first one was fun to watch :)

@lignumchannel 3 года назад

It was fun trying it out too!😁

@ellieboa 3 года назад

i like the robot filming!

@lignumchannel 3 года назад

I can't afford a human cameraman ;)

@sheldon... 3 года назад

wow, more that's a bit different to normal (both on the terrain carving and the use as a camera arm) I also particularly liked the evolution of the dust extraction 😆

@lignumchannel 3 года назад

Improvisation is my best buddy ;)

@DanielH 3 года назад

Having fun with robots, expensive robots 👍

@lignumchannel 3 года назад

I have to make some fun out of an ordinary day.. :D

@siagstas5535 3 года назад

Again very nice... a robot moving (dancing) to a (vienna) waltz...

@simoncawthan9919 3 года назад

Nice time lapse and tracking shots :) What speeds and feeds did you find worked best for styrofoam? I've got a moonscape to make on my cnc and having a starting point would be great. Not looking forwards to the mess though...

@lignumchannel 3 года назад

Thank you! For this one I used 12mm serated 3 flutes flat end for roughing. 150mm/s 45mm level depth at 200 hertz, stepover 11mm. For finishing it was 16mm ball end at 250hertz. Stepover 2mm, climbing, 80mm/s feed. Fast speed 500mm/s in both roughing and finishing. I must say this was pretty rough and and on the edge of what I would use. When I build guitars for example, feeds, stepover and depths are at about one third than they are here..

@Lex.Dachstein 8 месяцев назад

Very cool stuff. I am frequently using 3-axis CNCs in a Makerspace, and through that, I got the desire to use an industrial robot for wood carving large pieces. Unfortunately, I have absolutely no knowledge of how to do that. Can you recommend materials, books, websites, or manuals that explain how to use a KUKA robot for milling?

@jesperhagstrom 3 года назад

Fascinating! What CAM software do you use to generate the tool paths? I imagine it's pretty rare to use industrial robots like these for milling?

@lignumchannel 3 года назад

:) Yes it is, especially in Croatia.. I Use rhinocam for rhinoceros.

@oakleyjack7600 3 года назад

Every time you experiment, the more value your Company gains 🤔👍🎩😎

@lignumchannel 3 года назад

:D I'm glad you think so Jack!

@bailey2829 3 года назад

From a software standpoint, how do you run these robotic arms? Do they just take standard gcode, or did you have to do some fanciness to get them to run like a CNC?

@lignumchannel 3 года назад

I use irbcam software, it works just like regular cnc, some tricks to it but nothing special..

@niall_o_donovan 3 года назад

Perhaps the time is coming for me to hang up my Styofoam shaping hand tools 😭 Great video as ever. What would be the largest dimensions (length X breadth X height) the robot can deal with at once?

@lignumchannel 3 года назад

😁I'm not sure, robot has range of about 250cm in all directions making a half sphere with diameter of 5meters, what ever can fit in that sphere can be milled.

@antontudor5724 3 месяца назад

❤❤❤💪💪💪👏👏👏

@staylame 3 года назад

A M A Z I N G ! How do you measure the offset for each tool?

@lignumchannel 3 года назад

I lower them to zero plane and take the reading. Glad you like it! :D

@shivaargula4735 3 года назад

Question: When you have a machine with this much DOF, why does the tool always stay vertical? If it tilted along with the angle of the cut, wouldn't the surface quality increase a lot?

@lignumchannel 3 года назад

Not really because no matter how you tilt, the ball end will still be ball touching in a single point. I try not to use it if I don't have to because it's much more time consuming to program but in some cases where reach is an issue I use it..

@modustrial 3 года назад

SO SO COOL! Did you mount your camera on the second robotic arm for some of those shots?

@lignumchannel 3 года назад

Yes I did! I'm just sorry I didn't use it much before.. Hey btw, I'm starting with my house project next week, mostly in thermal brick and concrete. A lot of gfrc for wall panels and other elements so I'm sure I'l need a lot of advice, please get ready for me boring you with questions😁

@ericdanso2487 Год назад

What is the make of this robot ? And is it possible to get a used one Awesome work

@martharodriguezyvariedades 3 года назад

Dios te ama 🇨🇴🙏🙏

@RokitScientist1987 3 года назад

I see Lignum, I share, like and subscribe

@lignumchannel 3 года назад

😁you better!

@newerdzr 3 года назад

Хочу еще!

@elizabethb913 3 года назад

How fast do the robots work? How many hours of carving to timelapse into the video?

@lignumchannel 3 года назад

This took around 7 hours of milling time but you can do it much faster at the cost of precision and vibrations. This is at the limit for this kind of work. When I mill guitar bodies and necks, it runs at around one quarter speed of this..

@idmadera 3 года назад

Alguien me podría poner en contacto con el fabricante del robot? Gracias

@flitchi. 3 года назад

Hi, how many time to do this work pls ? (Milling time) :)

@lignumchannel 3 года назад

Somewhere around 7 hours or so..

@flitchi. 3 года назад

@@lignumchannel Thank you :) that's fast !

@oldmanfromscenetwentyfour8164 3 года назад

Landscape modeling?? N Gauge? Those semi-ovals off to the side look interesting, what did I miss?

@lignumchannel 3 года назад

I might film a short video of those ellipsoids, they will be coffee tables, I'm milling them for the same architect from "Atmosfera" for who this model is. The model is a terrain where small tourist resort with bungalows will be.

@PumpiPie Год назад

Whats the price for the robot? :D

@doubledarefan 3 года назад

1:55 Why the Z-hop, instead of cutting the next pass on the return?

@lignumchannel 3 года назад

Climb and up cut leave diferent textures on the surface so when choosing quality over speed I allways mill in a single direction.

@sethbracken 3 года назад

Marco Reps wrote a python script to edit out the robot in 3D printing time lapse. I bet you could use it on yours as well.

@lignumchannel 3 года назад

I will look into that, thank you Seth! :)

@gregthorne4292 3 года назад

You all must play some serious games of D&D.

@lignumchannel 3 года назад

I must start! :)

@JosePedroEspinosa 5 месяцев назад

What is the price of a robot like that?

@jeffreycollins7297 3 года назад

And to think those things were once all made by hand.

@kinopy2010 3 года назад

Good day! What is the CNC model?

@lignumchannel 3 года назад

Hello! This is Kuka kr150 krc2 robot.

@nathanmaddock1703 3 года назад

What is the purpose of the foam model?

@lignumchannel 3 года назад

It's for an architect studio as a base for tourist bungalow estate model.

@Dheerseng 3 года назад

Dear brother tell me machine set price in india 🇮🇳

@Lobozs21 3 года назад

Como cuanto cuesta un robot asi? :0

@Lobozs21 3 года назад

O maquina.

@lignumchannel 3 года назад

Naked robot can be found for as low as 5k€ in good condition.

@franciscoteixeira9143 3 года назад

The guys are so hot stuff.

@gio4447 3 года назад

Questi 2 Robot....Che io chiamerei Romeo e Giulietta, non sbagliano mai e sono amorevoli.....Ahahahahahh

@lignumchannel 3 года назад

I think of them more like Pat and Mat from that stop motion cartoon "a je to".. :D

@gio4447 3 года назад

@@lignumchannel Ahaahaahha

@ozgurceliker7159 3 года назад

param olsada ben alsamm

@iNerV 3 года назад

can you say model of robots?

@lignumchannel 3 года назад

Those are kuka kr150 krc2 robots.

@rigo6156 3 года назад

You could mill a sunroof on your car with that machine.

@lignumchannel 3 года назад

I'm sure someone, somewhere is doing just that! :D

@DominusFeles 3 года назад

Next up: Process of modelling a 3D landscape for robot milling

@EnergyStarProton 3 года назад

И ???

@9madness9 3 года назад

Practice on Styrofoam as a wooden splinter on finger goes for £10k

@lignumchannel 3 года назад

:Dyeah, I have full hands of them!

@user-zc3rs9qe7f 3 года назад

нихуя не понял, но очень интересно.

@MrDispro 3 года назад

ok now you are just showing off...

@oldmanfromscenetwentyfour8164 3 года назад

If you got it, flaunt it!

@lignumchannel 3 года назад

I have to make it interesting😁

@bobbarron1920 Год назад

Seems like overkill on robot size.

@guenoleadamantu8939 3 года назад

What? 🙄

@lignumchannel 3 года назад