Product Breakdown - Liquid Glass Deep Pour Epoxy Resin 

Great question! You can absolutely add some epoxy to the edges of your table. If it has completely cured I would recommend lightly scuffing the sides with either 220 grit sandpaper (or even a scotchbrite pad) and wiping it down with Isopropyl Alcohol 90% or higher first. Then proceed with applying a thin layer of either our Superclear Table Top Epoxy or Countertop Epoxy. This can be done by hand, with a chip brush, or a foam brush. The reason for scuffing the surface is to help with proper adhesion for a mechanical bond. If it is too smooth of a surface there may not be a proper bond, which could potentially lead to delamination down the road. If it is still hard & tacky, skip the sanding and go right ahead with applying the next thin coating using the products mentioned above. Here are some links to those products: Superclear Table Top Epoxy: tinyurl.com/3wwjzfsj Superclear Countertop Epoxy: tinyurl.com/mrx5eyse Superclean Epoxy Cleaner: www.superepoxysystems.com/product/superclean-epoxy-cleaner-8oz-bottle/ Scotchbrite Pad: www.superepoxysystems.com/product/3m-scotchbright-light-duty-pads/

Thanks for the kind words! You rule 🤘

Sweeeet! Let us know if you have any questions. We'd love to help!

That's great to hear 😊 Anything we could improve on for future videos?

You've learned well young epoxy padawan 🙇

That's what is confusing,. The directions say use sealant or curing agent. This is not addressed in the video. Also, the temperature needs to be 70 to 80° The video says, "Keep cool. Heat is an enemy. Which is it?

Hey there! We do actually have a CPS rating for all of our products on our website 😉 Here's the link to the Liquid Glass TDS in particular: www.superepoxysystems.com/wp-content/uploads/2023/01/Liquid-Glass-Epoxy-System-TDS-12-08-21.pdf And here's the link to all of our SDS/TDS/Instructions: www.superepoxysystems.com/instructions-tds-sds/

@@superclearepoxy That's good to hear! I tried looking on your website the day I left my comment and could not find anything about CPS. I even tried running a search for the term CPS and found nothing.

Hey Michelle - thanks for reaching out! We haven't fixed that project yet, but we certainly plan on it. Our next video will be on our 24 Hour Deep Pour Epoxy, and that will be our last product breakdown for a bit. We will most likely work on some DIY projects and that square piece you mentioned. A quick summary for how we plan to restore it would be by sanding it down beneath the blemishes, cleaning with Isopropyl Alcohol 90% or higher, followed by either a polishing compound or a flood coat with our Superclear Table Top Epoxy. Hope that helps! Have a great one 😊

@@superclearepoxy Thank you! Looking forward to it!

Great question - we actually did NOT use any mold release in this product breakdown. BUT - if we did, we would highly recommend a paste wax mold release for use with Liquid Glass Deep Pour Epoxy. The sprayable mold release tends to dissolve before the deep pour epoxy cures. You can find the mold release on our online store: www.superepoxysystems.com/product-category/tools-accessories/mold-releases/

Great question - we don't personally notice any strong odor with this product, but others may be more sensitive. Feel free to pour in either location 👍

Hey Michelle, we have heard of people using a seed heating mat to place under their mold to help bring up the temperature, but we don't have any first hand experience with this. Feel free to give it a shot, but keep in mind that introducing too much heat could have adverse results on the outcome of your pour 👍

YES 👍 That is exactly what we would suggest!

@@superclearepoxy Thanks!

We were spraying it with Isopropyl Alcohol 90% or higher, but you can also use our Superclean Epoxy Cleaner. Superclean Epoxy Cleaning Spray: www.superepoxysystems.com/product/superclean-epoxy-cleaner-8oz-bottle/ Isopropyl Alcohol 90% or Higher: fgci.com/product/isopropyl-alcohol-99/

We call them mixing containers or buckets, but we sell these: www.superepoxysystems.com/product/epoxy-resin-mixing-cups/

Hey there, it typically takes around 10-12 hours for the Liquid Glass Deep Pour Epoxy to gel up. Let me know if you have any other questions!

Sorry to hear you are dealing with unwanted bubbles! The epoxy could be too warm or too cold. Please email superclear@fgci.com and our experts will be happy to assist you further.

Hey there! That's a great question. It will cure no problem between .5" up to 4"+ depending on your volume and ambient temperature. Go for it! 👍

@@superclearepoxy Thank you so much!

Absolutely! Let us know if you have any other questions! @@Muhsinah.Nadeem

That would be awesome, HOWEVER, this product does not hold up well to direct UV sun light exposure. It will significantly decrease the clarity in a short span of time. Also if it is sitting out in the sun, if it gets too warm (around 150F-160F), this could cause the resin to become flexible. Let us know how it goes though.. 🫠

Sorry about that 😅

Heard - we will be fixing that moving forward! 😅

Heard 🥴 ..we will be fixing that moving forward! 😅