PSA Micro Dagger 2K Rounds Later 

Thanks, I’m not a “reviewer” by nature so most of the time I’m just winging it and trying to think about what you the viewer might be interested in. I really prefer to just shoot lol. Thanks for the watch and sub.

You can send me your slide and I’ll break it in for you 😂.

😅

Yeah Jamin has said mind December hopefully on frames. It really depends on the demand I would think. If they keep selling out in 60-90 seconds I don’t see how they can offer frames only yet lol.

Todays drop is the black C-1. bit.ly/4abnKcU

For me it feels fine. I’m used to carrying my compact dagger and the C-1 is smaller.

Yes the slide is cut enough that any optic will cowitness.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GRzdo9A1wos.htmlsi=AJ-pZn3BUT3MfOOJ Mags seem to be hit or miss everyday. Just gotta get lucky on them. That’s a video on the holster I’m using.

I check everyday how the hell ?

@@kaser92337 I went on their website and told it to email me when back in stock. I did that for every Micro Dagger model they have. You have to keep an eye on your email. Because they will sell out within 20 to 25 minutes. I just got lucky and saw they were in stock 2 minutes after I got the email. By the time I paid and got my confirmation. They were sold out.

At the time it wasn’t really a long term, I had put the 2k through it relatively quick, over the span of 4-5 seasons. I was at the time trying to find any weaknesses to report back to the engineers for any improvements. It’s still been fantastic since and no problems. I’ll see about possibly making a long term review around the 3k mark.

I got mine back in September on a limited drop, from my understanding you should be able to use g43 triggers. I don’t do trigger swaps so I’m only going off what I have seen posted online.

Herters 115 gr. It was purchased about a year and a half ago in a bulk 500 round pack. Head stamped *USA*.

I’m running a bravo concealment G48 MOS Torsion IWB and an Versacarry compound leather/kydex OWB.

Interesting, I tried my g48 holster, but it didn’t fit 😂.

@@richardnorth3466 I’ve seen some run tight on the slide channel, the c-1 seems to be a hair taller and wider.

First drop was today, there will be another drop tomorrow. If you follow my channel I will post a link tomorrow directly to the one’s dropping tomorrow. Approximately 2:55 our time.

Today 2:55 central, be ready. bit.ly/3uQwrt2

I subscribed to the "notify when in stock" also. PSA has never notified me. Picked up 2 frames just by luck.

Your good. Yes no mag malfunctions early on I had an issue with FTEs, the first pistol was purchased by me and in a group of 5 that were sent out. I got with the engineers and they did make changes to the frame and parts. The second pistol was with the updates and the C-1 still is picky with some 115gn but zero issues on the 1000+ of 124s. Some 115 is not as hot and can cause some FTE randomly. AAC 115 has been good and Winchester as well. Herters was the main ammo that gave me problems. That has been the only malfunction either has had. Even the original one that wasn’t updated (they made slide changes when it was sent in) has been much improved with a Glock 43 oem extractor installed (which was one of the changes made, they redesigned the original to be a match to the oem Glock). I do feel that the problem of FTEs is exaggerated because of the comp, anything with a comp can cause FTEs because of ammo choice.

I saw a post that it may be another week or 2 before frames only again, I’m thinking they are waiting on another shipment to come in.

I have a G19, personally I prefer the dagger hinge trigger. I can’t shoot the Glock of crap, I’m really thinking about swapping out the gen 3 trigger for a spare dagger assembly I have lol.

Appreciate it, and thank for watching.

The standard micro is at $339 and I think going forward the $299 standard daggers will fade with clearance stuff. I’m sure they will still have sales but as the compact is going full optic ready those are about the same price. The frames are the same $99.

@@Foxbodys4life Nice. I looked on the site and I didn't see them. They must've sold out immediately. Hopefully I catch the next drop.

They probably arent advertising them because they cant keep them in stock for more than 30 minutes every other month

@arguy3297 they are lasting about 30-60 minutes now daily.

@@Foxbodys4life Yeah the mags get gone Very Quickly.

The standard Micro should fit any 43x holster the C-1 and C-1 would require a 48 holster.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GRzdo9A1wos.htmlsi=KCgw8V9Kcr7lZFq2

The OWB bravo will require some sanding on the slide channel as the micro sled is slightly taller by a hair.

The micros come with low profile sights similar to the non optic daggers did. They still co witness fine through the 407k. I’m not sure why they went to tall sights only on the daggers.

X-1 is 48 length and no comp, C-1 is 48 length but has the comp built it and a 43 length barrel and the extreme carry cut is the standard 43x size slide and barrel. It’s up to the individual on their preference, I like shooting the C-1 but don’t have any experience with the others yet.

​@Foxbodys4life how is it cleaning that comp I bet it gets super dirty quick eh?

@glockwhore not bad, it does get dirty quickly when running rounds but it comes right off with some cleaner.

Any g43x trigger should work.

Cr920 is not an exact clone like their bigger guns are. Do your homework before you try that.

Yes. The one provided was 1 thread too long. I took 2 off just to make sure. My cousins 48 that I zeroed for him this past week had an EPS carry and it had the same problem.

@@Foxbodys4life thanks. I just ordered the all black X1 and the black/fde C1 so excited to get them. I just recently put a 507c on my dagger compact and the screws that came with the holosun went right in without hitting but I’m going to try and check it as well.

The ones from PSA and I did take 2 threads off the right side.

Thanks. My design and sell them. PSA has been a customer for them for a few years for shot show displays.

I have several videos (shorts) up on my channel.

I haven’t shot it in the short (43x) configuration yet but based off my experience with similar sized hand guns, yes the comp does make a difference.

No it takes the micro mags/g43x/48 mags. Its a smaller platform but with the PSA mags you get the same 15+1.

@@Foxbodys4life I'm rather new the gun community so pardon my ignorance. With 43x/48 mag compatibility, which do you recommend buying out of the two? or does it not matter?

@XAngelofgunzX it comes down to the length slide you want, the longer the barrel the more accurate you will be at distance, the smaller the barrel/slide the more concealable you can be.

No. The micro is a G43x/48 clone and the dagger is a G19. The micro is much thinner.

I make them and sell them. Tactical Leprechaun on Facebook.

Snagged this one in September on a limited drop. They are dropping almost daily now. Next drop is in 25 minutes. bit.ly/3RgJJWX

Sniper green is dropping in 5 mins. bit.ly/46VMZwT

@Foxbodys4life still waiting for it to drop

@@kaser92337 what the micro or mags? The micro have been dropped M-F since the 2nd week of December. Always at 4ish Eastern. I make post of what’s going to be available that day for my subs. The next drop won’t be until Tuesday I suspect.

Putting the pressure on me 😂.

No. The dagger is G19 and the micro is 43x.

The MC-1 and micro slides are not compatible with the compact dagger. The dagger is a G19 and the micro is a 43x/48.

😂

The MC-1 is $359 the standard is $339.

Herters 115 gr. Head stamp *USA*.

Every little thing helps. Thanks for the watch. Have a great weekend.

I see the post on social media and spread the word.

The weight is the biggest plus, it’s way lighter. If you are subbed I have been posting links daily to the offerings available, they are in full production mode so we should see drops regularly.

Some 115 has given me problems but not on a consistent basis. 124 has been problems free.

He does what he wants just like the donkeys. They didn’t make an appearance in this video for a change 😂.

If you are subscribed I post when they are dropping. They have been dropping consistently at 4 but different models everyday.

@@Foxbodys4life I am subscribed. I watched today with no luck but I’ll keep watching. Thank you

It’s all superficial, my compact dagger that has over 7k looks about the same and haven’t had any issues. The finish wear hasn’t changed any since the first 300 rounds.

@@Foxbodys4life good

If your subbed I post daily when or what is available. They are dropping almost daily.

I have a video up with the micro and a bravo 48 mos holster and it fits perfectly. So any g43x/48 should be good.

Yep that’s what your kids are good for 😂.

If you are shooting 115 it maybe picky, it loves 124s.

@@Foxbodys4life just finished up at the range. It shot 115, 124 and my HST and Critical defense reliably. No issues. I prefer 124 grain for my defense ammo.